Manual

Radio Antenna Connections
Connect the supplied FM/AM antennas for radio listen-
ing.
1. Connect the AM loop antenna to the AM antenna
connectors.
2. Connect the FM wire antenna to the FM antenna
connectors.
Notes
• To prevent noise pickup, keep the AM loop antenna
away from the DVDNCR Receiver and other compo-
nents.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as hori-
zontal as possible.
Rear of DVD/VCR Receiver
Digital Device Connections
Connect the DIGITAL AUDIO IN (OPTICAL) jacks on
the DVD/VCR Receiver to the digital audio out (optical)
jacks on your digital device (Game device, Digital Set
Top Box, etc.), using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN,
press AUX on the remote control.
Notes
• If the audio format of the digital output does not
match the capabilities of your DVD/VCR Receiver, the
DVD/VCR Receiver will produce a strong, distorted
sound or no sound at all.
• The Optical input function is available only when the
other unit's Sampling Frequency is 32 - 48kHz.
Game Device
Digital Set Top Box
! o _ ....O,,)
i
Accessory Audio/Video (A/V)
Connections to DVD/VCR
Receiver
Connect the VCR IN LINE1 or LINE in 2 jacks on the
DVDNCR Receiver to the audio/video out jacks on your
accessory component, using optional audio/video
cables.
Rear of DVD/VCR Receiver
Jack Panel of Accessory Component
(VCR, Camcorder, etc,)
OR
RearofDVD/VCRReceiver
Frontof DVD/VCRReceiver