Manual

ssette tape playback
To play a prerecorded tape.
VCR DVD
ii
ii
Preparation:
• TurnON _qeTV and selectthe correspondingvideo input.
• Press VGR DVD selector to select the VCR mode.
(The VCR indicator will light).
Load a prerecorded tape
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
To start playback
Press PLAY.
Playback will start. "•" will appear
on the screen for about 4 seconds.
To stop playback
Press STOP once.
The tape will stop but remain fully
loaded and ready to play.
° •" will appear on the screen for
about 4 seconds.
Stop the playback or recording via STOP on remote.
To rewind the tape:
Press REW.
@
To forward the tape:
Press FWD.
To discontinue the tape-winding, press STOP. To switch to
playback directly (without STOP), press PLAY.
• ForwardlReverse picture search mode
When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REW or
FWD and hold it down. The unit will resume the tape
advance or rewinding as soon as the button is released.
Notes:
• This VCR selects the playback tape speed SP, LP or SLP au-
tomatically.
• The Cassette tape and DVD disc can be played back simulta-
neously, if you press VOR DVD selector, the tape playback
and DVD playback alternate with each other on the screen
(via CH3, 4 or video connection).
• When you select the VCR mode during DVD playback, DVD
playback will stop automatically after approx. 5 minutes.
13o