Manual

This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory, skipping
over unwanted channels. Before selecting channels, they must be
programmed into the DVD/VCR's memory. In addition to normal VHF
and UHF channels, this DVD/VCR can receive up to 113 Cable TV
channels. To use this DVD/VCR with an antenna, set the TV/CATV menu
option to the TV mode. When shipped from the factory, this menu option
is in the CATV mode.
ii ................. ii
Preparation:
Turn ON the TV and select to the corresponding
video input.
Press MCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Press VCR MENU. Press SET + or- to select
"CH SETUP", then press ENTER,
VCR MENU
SETUP
Press SET + or- to select "TV/CATV".
Press VCR MENU until the menu screen is
,cleared.
VCRMENU
SETUP
Repeat left step 1 and press SET + or- to
select "AUTO CH MEMORY".
Press ENTER.
Auto tuning will begin. The channel dis-
play will count up and when finished,
the screen returns to normal.
Note:
You can't select"CH SETUP'ifyou setthe channelto"Ll"or
"L2".
271