Manual

ck setting
The AUTO CLOCK function will automatically set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches for
a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately 4 minutes for the clock
to set itself automatically.
ii _D 'III,,I_D ii
::AUTO:;¢LQCK se_!ng:: ;:;:::::::::: :! ! To set AUTO CLOCKto off
Preparation:
TurnON theTV and selectthe corresponding videoinput.
Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Connect the Antenna or Cable system.
• If you usea cable box,turniton.
Plug the AC Power cord to the AC outlet.
Make sure the DVDNCR is turned off.
Q • If you press POWER, the Auto Clock
set is not programmed.
Wait at least three minutes and press
, POWER.
Press CALL to check the clock setting on
the on screen display.
CALL
DISPLAY
O
Ifthe clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.
F
The auto clock adjustment will be updated at 6:00
AM, 12:00 PM and 6:00 PM everyday when the
DVDNCR turned off.
• If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be
left on.
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time,
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want AUTO CLOCK setting:
PressVCRMENU.
VCR MENU
SETUP
Press SET + or- to select "SYSTEM SETUP",
then press ENTER.
Press SET + or - to select "AUTO CLOCK".
5
Press VCR MENU repeatedly to return to the
normal screen.
• When the AUTO CLOCK is set to
VORMENU
SETUP "OFF", the AUTO CLOCK adjust-
ment does not function.
• Set the clock manually [_.
124