Manual

Warning

When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks. To avoid

possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the

DVD/VCR are connected to an amplification system. To enjoy DTS Digital Surround TMplayback, an external 5.1 channel

DTS Digital Surround _ decoder system must be connected to the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR.

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with

an MPEG2 audio decoder or MPEG2 audio processor.

Amplifierequippedwith an

MPEO2oudiodoo.or

I HT_OAXtAL To OPTTCAL @

I_ I) I_ typed@tal/ / type digital ,_ _L

- audioinput audio input

r- ._j |_ Optioal digital cable _ Connect e,ther.

• Use DVD video discs encoded via

the MPEG2 recording system,

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker

system (right and left front speakers).

a digital audio input [_ F_ I_

I [_-Amplifier equipped with

TI°_'OAXlAL_ _ T° OPTTCAL H

Itype digital| | type digital _ _ _L_

audio input audio input

Optioa, digital cable Connecte,ther.

I ,_ 75 _ coaxial cable ]

Notes:

• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the AC-3 RF input of a Dolby Digital Receiver.

This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM AUDIO

OUT jack of the DVD/VCR.

• Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the "OPTICAL" or "COAXIAL" input of a Receiver or

Processor.

• Refer to the owner's manual of the connected equipment as well.

• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the

wall outlet before making any connections.

• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening

level Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD/VCR's power cord. If you leave the amplifier power on, the

speakers may be damaged.

211