Manual

AfteryouhaveconnectedtheantennatotheDVDNCR,youmustconnecttheDVD/VCRtotheTV.
Beloware3commonmethodsofconnectingyourDVDNCRtoaTV.FindthetypeofTVyouareusingandfollowthe
connectiondiagram.
This DVDNCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVDNCR to the TV for VHF and UHF reception.
75 ohm Coaxial Cable (supplied)
TV
VHF/UHF IN
..®
Note: If a VHF or UHF antenna is used,
set the TV/CATV menu option to
the "TV" mode.
TV with single 75 ohm VHF/UHF antenna
input
O
==
Splitter 75 ohm Input
75/300 ohm outputs
75 ohm Coaxial Cable (not supplied)
(supplied) _ _IP'_
TV
_UHF_
® ®
Note: If a VHF or UHF antenna is used,
set the TV/CATV menu option to
the "TV" mode.
TV with 300 ohm UHF and 75 ohm VHF
antenna inputs
Splitter 75 ohm Input
300 ohm outputs
75 ohm Coaxial Cable (not supplied)
(supplied) I'__----_
TV
F
_UHF7
® ®
J
_VHF7
@ ®
Note: If a VHF or UHF antenna is used,
set the TV/CATV menu option to
the "TV" mode.
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
IsI