TOSHIBA Introduction Connections DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER Basic setup SD-V291 OWNER'S MANUAL Hi-Fi5QPB Playback (VCR) Recording (VCR) Otherfunc6ons (VCR) Basic @2003 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs:
IMPORTANT SAFEGUARDS The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons, CAUTION: TOREDUCE THE R_SK OFELECTRIC SHOCK, DO NOT REMOVE COVER The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) in
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS =: The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS O All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time. unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14.
IMPORTANT SAFEGUARDS / Power source 24. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 25. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 26.
• • • • • When shipping the DVD/VCR, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD/VCR. Do not leave rubber or plastic products to contact the DVD/VCR for a prolonged period. They will leave marks on the finish. The top and rear panels of the DVDNCR may become warm after a long period of use. This is not a malfunction.
tes on discs a • Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. o= DVD video disc O I' I DVD video disc • • Title 2 Title 1 , Playback side • Do not attach paper or tape to discs. __ _Chapterl Chapter2 __Chapter1 _Chapter2 Chapter3 Video CD/Audio CD Video CD/Audio CD T oik, T oik2 T olo 3 Traik0 J'JJ'J,_. JJ'J,l'._. JJ'J'J._. J,l'J'JJ'._.
tes on discs (continued) This owner's manual explains the basic instructions of this DVDNCR. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVDNCR may not respond to all operating commands. This is not a defect in the DVD/ VCR. Refer to instruction notes of discs. "_" may appear on the TV screen during operation. A "_Ir" means that the operation is not permitted by the DVDNCR or the disc.
Introduction Basic playback IMPORTANT SAFEGUARDS .......................... Power source ................................................... Precautions ...................................................... Notes on discs .................................................. Contents ........................................................... Identification of controls ................................. 2 5 6 7 9 10 Connections Antenna connections ......................................
ntification of controls See the page in [_ for details. VCR/DVD mode selector button [_ Cassette loading slot [29} DVD indicator [42} OPEN/CLOSE button [_ EJECT button [_ VCR indicator ON/STANDBY REC buttor [_ Disc tray [4_) Remote sensor [t3} button[_ STOP button [_ Display window [_ AUDIO (L/R)/VIDEO (LINE IN 2)jacks IN CHANNEL/_/vbuttons[_4_ When connecting the optical digital cable, remove the cap and fit the connector into the jack firmly.
Play indicator VCR indicator (VCR) Recording _ Still indicator r=ll_d_ _3 Disc inserted indicator (DVD) -- Cl_) 'ndicat°r_VOR>/TRK (rt_ _._| _|" --I / Track indicator (CD) _._| _| iDndiCc iatnoSre (r_ d ) PM_AM,PM{ndicator oo,,,ooc,,!o,,,od,c,tor ' Tmer Record ng nd cator (VCR) Tape loaded indicator (VCR) Press CALL to display information on screen. To cancel the display, press CALL again.
of Controls The instructions (continued) in this manual describe the functions on the remote control.
a € Slide the battery compartment cover in the direction of the arrow. Install two "AAA" (supplied), payingbatteries attention to the polarity diagram in the battery compartment. ,_ ,_ O Replace the compartment cover. Battery precautions The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
_tenna connections If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber, skip ahead to page 16 for the proper connections. The DVDNCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connection diagram.
Afteryouhaveconnected theantenna totheDVDNCR, youmust connect theDVD/VCR totheTV. Below are3common methods ofconnecting yourDVDNCR toaTV.FindthetypeofTVyouareusing andfollow the connection diagram. This DVDNCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVDNCR to the TV for VHF and UHF reception.
TV (CABLE TV) conneca_ns Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVDNCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a premium channel which is scrambled, you must have a descrambler box for proper reception.
IMPORTANT: Make sure the W/CAW menu option is set to the "CATV" mode, This DVDNCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descramb¢er must be used. Deserambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVDNCR to a cable system, Below are six common methods of connection.
a TV Connect the DVDNCR to your TV. Note: This method transports VHS and DVDwideo signals. For enhanced DVD-video performance, we recommend you also connect the Swideo or ColorStream ® component video outputs to your TV/monitor. (See page 19.) _ Signal flow (red) '_ (white) _wall outlet ._To To VIDEO OUT ANALOG AUDIO OUT Audio/video cable (supplied) io inputs To video input I_ (yellow) I_ _1 .
!ii:ii!_!!ii;i_i_ _,_!i!; _ii!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i! ii_i!_i!ii_i!_i!ii_i!_i! ii_i!_ Note: The S-video o
nnecting to optional equipment You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the DVD/VCR to optional audio equipment. For connection to your TV, see "Connecting to a TV" [18_ [19_. I_ Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home.
Warning When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the DVD/VCR are connected to an amplification system. To enjoy DTS Digital Surround TMplayback, an external 5.1 channel DTS Digital Surround _ decoder system must be connected to the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR.
ttl g the video channel When a TV is connected with the 75 ohm coaxial cable only. To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). • Press andinhold 3 or 4mode. on the remote for 3 seconds standby The video channel will C'_b OR _'b _ start to flash for 3 seconds in the display window, \ / / \ For a push*button TV tuner If CH 3 or 4 corresponding to the video channel cannot be tuned
in "h g r e language ii VCR DVD ii ii You can choose from three different languages (English, French and Spanish) for the on-screen displays. ii 1-3 1,4 1-3 Preparation: Press VCR MENU until the MENU screen cleared. Turn ON the TV and select to the corresponding video input. Press MCR DVD selector to select the VCR mode. (The VCR indicator 1 VCR MENU SETUP will light.) Press VCR MENU. VCR MENU SETUP The VCR menu screen will appear.
ck setting The AUTO CLOCK function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an ii _D 'III,,I_D ii Antenna or Cable system and it is turned off. The DVD/VCR searches for a station in your area containing the necessary AUTO CLOCK setting signals. Once received, it will take approximately 4 minutes for the clock to set itself automatically.
!ii_iii'i!_7!iii!17_77,71!_ ii!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7!4!ii_7!4! ii_7!4!ii_7!4!ii_7!4! ii_7! In the rare event that you live within broadcast range of two stations in
sem g (con. ued) If the AUTO CLOCK process did not set _heda_earid time correctly, you must set them manually for timer recording and DAYLIGHT SAVINGTIME. ,D CD C) CD C) <7 CTD_ CD C I 2-4 CANCEL 24 EXAMPLE: Setting the clock to "8:30 AM _ October, 26 (SUN), 2003. After setting automatically. the clock, date and time starts functioning PressVCR MENU. VCR MENU SETUP PreSS SET ÷ or-to then press select "SYSTEM SETUP", ENTER.
This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR's memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu ii ................. ii option to the TV mode.
ner setting (continued) BUTTONS Repeat the step I on page 27. Then press SET + or - to select the "ADD/DELETE" and press ENTER. When you don't want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACKGROUND "ON". When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to "ON". Repeat page 26 and press SET + orthe - tosteps selectt-2 "NOonNOISE BACKGROUND".
and unloading a cassette tape Use only video cassette tapes marked _ and S_- Push the center of the tape until it is automatically inserted. ¢ Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted.
ssette tape playback To play a prerecorded VCR ii tape. Preparation: • TurnON _qeTV and select the correspondingvideo input. • Press VGR DVD selector to select the VCR mode. (The VCR indicator will light). DVD ii Stop the playback To rewind or recording via STOP on remote. the tape: Press REW. @ Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). To forward the tape: Press FWD. To start playback Press PLAY.
SLOW ATR REW PLAY FWD PAUSE/STiLL CM SKiP SET +/- • Automatic tracking adjustment Whenever you insert a tape and start playback, the automatic tracking feature continuously analyzes the signal to enable optimum picture quality during playback. Reverse picture search function Press REW once or twice during playback. Forward picture search function Press FWD once or twice during playback. To return to playback, press PLAY.
COUNTER RESET CLOCK/COUNTER Press VCR MENU. Press SET + or - to select "AUTO REPEAT". Press CLOCK/COUNTER. The counter display shows the tape running time during playback or recording, CLOC_COUNTER 0 VCR MENU SETUP B4:3B Press ENTER to select "ON" 2 or "OFF". Press COUNTER RESET at the desired tape position. if "ON" is selected, the playback The counter will be repeated endlessly. °00:OO:OO" position (e,g. the beginning of recording).
_i_!i!iii_ii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_ iI!ii_!iii_i, !ii_i_i'_,!iii! _!i_l_iiiI_!_ill_ilili_i_l_l!_li_i_l_l!_li_i_l_l!_li_i_l_l!_li_i_l_l!_l VCR DVD il CLOCK/COUNTER Press CLOCK/COUNTER The clock and tape counter alt
a TVprogram Recording and viewing the same TV program. ii ii_, Preparation: Press Number • Turn ON the TV and select to the corresponding video input. • Press VCR DVD selector to select the VCR mode, (The VCR indicator will light,) channel Loadintact. a cassette tab tape with the erase prevention The DVDNCR Press SP/SLP SP or SLP. will automatically turn on to select the desired tape speed The tape counter and "SP" or "SLP" will appear on the screen for about 4 seconds.
.... ,4 _i 'II_CI'_ i'_ I' TVNCR , • Press STOP to stop recording. "•" will appear on screen for about 4 seconds. : PAUSE/STILL STOP Auto Rewind feature This VCR will automatically rewind the tape when the tape has ended (except during OTR and timer recording). It will also eject the tape. (3 o Press PAUSE/STILL material. to avoid recording Press again to continue unwanted o the recording. "II1" will appear on screen for about 4 seconds.
e-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording F Preparation: • Turn ON the TV and select to the corresponding video input • Press VCR DVD selector to select the VCR mode (The VCR indicator will light,) Example: One-touch Timer Recording for 30 minutes Press Number channel to be recorded. button or CH +1- to select the ¢¢¢ (Z) G) (2) G) Load a cassette tape with the erase prevention tab intact.
_i_!i!ili_ii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_ ii!iiiiii_i, !_i_i_i_i_ii!_!i_i_iii_i!_iii_li!_ii_i_i_i!_ii_i_i_i!_ii_i_i_i!_ii_i_i_i!_ii_ " VCR DVD EJECT Timer recording can be programmed on-screen with the remote control.
_!i_i_i ¸_!!!i!!!i!!!i!_!_t_i_!_ii!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!!!i!ii_!! _!_!!iiiiiz!i_i_;;_!_;;_!_;;_!_;;_!_;;_!_;;_!_;;_!_;;_!_;;_!_;;_!_;;_!_ recording(continued) REC 3R MENU ii ,To,confirm o cance! Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
reo recording and playback / Second Audio Program (SAP) AUDIO SELECT SET +/- VCR MENU i The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. When a MTS STEREO broadcast is received, "STEREO" will appear on the screen for about 4 seconds and the program can be viewed or recorded in stereo. The Hi-Fi stereo recording procedure is the same as for normal recordings. Note: When using a CATV system, stereo TV programs may be transmitted over a mona cable channel.
vcRDvD a video tape If you connect a previously the DVDNCR recorded tape, to another Make VCR or Camcorder, all connections before you can turning 2 duplicate on the power.
_7liii_ii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii_ii!i_iii ilili_!iii_i, !_i_i_ll_li!_!i_l_i7il!_ilil_7ili_i_l_li7li_i_l_li7li_i_l_li7li_i_l_li7li_i_l a DVD/CD disc _2 You can record disc material in DVD, Audio CD, etc.
I CAUTION ' a diSC This section shows you the basics on how to play a disc. / Keep your fingers well clear of the disc tray as it is closing. I Neglecting to do so may cause serious personal injury. Preparations: • When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD/VCR. This may include S-video or component video inputs which are exclusive to DVD playback.
VCR DVD OPEN/CLOSE _ ? il il To obtain a higher quality picture Occasionally, some picture noise not usuallyvisible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information.
a disc (continued) You can play discs at various speeds. ....... REW skip FwDPLAY _ @ PAUSE/STILL SLO • Press REW or FWD during playback. @9 TO resume normal Press PLAY. playback REW: reverse playback FWD: Fast Fast forward playback Notes: Each time you press the REW or FWD button, the playback speed changes. • The DVD/VCR mutes sound and subtitles during reverse and forward scan of DVD video discs. However, the DVD/ VCR plays sound during fast forward or fast reverse play of audio CDs.
This player can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW, To produce the MP3/VVMA/JPEG-data. you need a Windows-PC with CD-ROM drive and a MP3/WMA!JPEG-encoding Software (not supplied). The Apple-HFS-System can not be played. 0-9OPEN/CLOSE il iiPLAY iilsxoP Ii il ENTER Press OPEN/CLOSE. Press STOP to end playback. • The unit records the stopped point. "_" appears on the screen. Press PLAY to resume playback (from the OPEN/CLOSE The disc tray will open.
playback (continued) OPEN/CLOSE 0-9 , You can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to your TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen. il SKIP IqN/1_1 PLAY ___j_>-@ STOP TOP MENU ENTER MENU A/V/
,iI _, ii_ ,_i , ,_iiii_ .... :i!!iii ,ii!!!i i SETUP ENTER A/V/_/Ib" You can continuously play back all JPEG files automatically. After the setting below, start playing the disc on which JPEG files have been recorded. To make SETUP screen disappear, press SETUP. Press select SETUP in the stop mode. Press "Picture", then press ENTER. _ or • to VCR MENU _lU_ Press A 3 or • to select "JPEG VCR MENU SETUP Interval"= O.
playback (continued) ............. ii .... SETUP ENTER A/V/4/I_. When playing back a CD containing the file menu. a mixture of MP3, WMA and JPEG files, only MP3/WMA or JPEG files can be displayed on Press SETUP in the stop mode. Press • or • to select "Picture", ENTER. then press VCR MENU SETUP 2 Press • or • to select "Select Files". file Press type. ENTER or • I• to select your desired All: Displays all files, Music Only: Displays only MP3/WMA files. Pictures Only: Displays only JPEG files.
ANGLE ZOOM A/V/41/, This unit will allow you to zoom in on the JPEG image. PressZOOM CM SKIP ZOOM Press • frame. during playback. Enlarged JPEG images are displayed. You can make the images even larger by repeatedly pressing ZOOM. / V/' I • toview a different part ofthe You may move the frame from the centre positionto UP, DOWN, LEFT or RIGHT direction. 1 t 4 1 In the zoom press return to a 1:1mode view (Q Off}.
oming/Locating ...._ desired scene DISPLAY -- This unit will allow you to zoom in on the frame image, You can then make selections frame. Press • frame. PressZOOM during playback. CM SKIP ZOOM The centre part of the image will be zoomed in, CANCEL by switching the position of the / Vl • / • to view a different part of the You may move the frame from the centre position to UP, DOWN, LEFT or RIGHT direction. Each press of ZOOM will change the ZOOM O,1 (x 1,3), 0,2 (x 1,5) and 0,3 (x 2.
desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene, Press MARKER during playback. MARKER Press MARKER during playback or stop mode. MARKER Select the blank Marker using • or V. Then press ENTER at the desired scene. Press • or • to select the Marker 1-3. • Repeat this procedure to set the other 2 scenes. Press MARKER to remove this display. MARKER • To cancel the Marker Follow the above steps 1-2, then press CANCEL.
ii!iiii!ii!iiii!ii!iiii!ii!iiii!ii!iiii!ii!iiii!ii!ii!i ¸iiiiiil ¸lliiii_illi_!_iil;l_lll_ll_lll_ll_lll_ll_lll_ll_lll_ PLAY MODE A-B RPT ENTER V/ DVD Press • "Chapter" / • or ENTER or "Title". playback. The start point is selected, once or twice to select 2 CDNCD Press • to select "Repeat".
_ogram playback/Random playback (CD) O-9 You can arrange the order of tracks on the disc, PLAY .... MODE PLAY il _ 1 Prer:AY MO°E,n the stop mode. The programmes you selected will start to playback in the order. To return to normal playback, select Play Mode: "Off". • To cancel program playback Select "Clear" and press ENTER. If you input a wrong number, press CANCEL. To program others, repeat Step 3. __ CANCEL Press •/• and or press • / • ENTER.
menu ANGLE PLAY TOP MENU MENU ENTER A/V/
'soundtrack language/ Setting surround sound ,iI _ , ii_ ,_i , ,_iiii_ il AUDIO
!_!if!! ;i! ;i!_!_t_!_ _!_i_i_ ¸;i!!!!!! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i! ;i!_iij_i !i!!!ii! !!__!_;:!!_!!!!_!!!!_!!!!_!!!!_!!!!_!!!!_!!!!_!!!! SUBTITLE AUDIO When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE appears.
•the aspect ratio of TV screen You can select the aspect ratio for your TV. The following pages describe the setup/operation ,iI _, ii_ ,_i , ,_iiii_ in DVD mode, i ii iii_ ' _'_iii ; ENTER RETURN AIVI
-- DISPLAY on screen display/Status display of disc On screen display can be switched on or off when you press the buttons. Press SETUP Press• or • in the stop mode to select "Picture". or No Disc. Press • / • or ENTER to select "On" or "Off". VCR MENU SETUP On: Off: Press • "Display". or ENTER, then press • or • to select On screen displays appear when you press the buttons (factory setting). On screen displays do not appear when you press any buttons.
Range Control ,iI _, ]_ _iiJ DRC (Dynamic Range Control) enables you to control the dynamic rangeso as to achieve a suitable sound for your equipment, SETUP 4 Press SETUP theselect stop "Sound". mode. Press • or • in to VCR MENU SETUP To SETUP screen disappear, pressisSETUP or make RETURN while the SETUP screen being displayed. VCR MENU SETUP RETURN Notes: select "DRC".
setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. il .............. stop "Parental". mode or NoThen Disc.press Press SETUP • or • intothe select • or ENTER. VCR MENU SETUP PressAor•to select"Parental",then press • or • until the level you require appears. Press tal control SETUP screen.
the parental level 0-9 ii,,,, q_i_i!!! _........ il 1 Press SETUP Press • in the stop mode or • Then press • ', or No Disc. Press • buttons or • to(0-9) select then press number to "Password", enter the password. to select "Parental". or ENTER. Note: You can change the password if you want. VCR MENU SETUP d> _b cb ocbcb OQQQ Press number buttons (0-9) to enter the password you have stored. OQ<_O Press ENTER. The rating is now unlocked.
orary disabling of rating level by DVD disc , Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. ii PLAY .............. _ Load DVD PLAY or OPEN/ CLOSEa on thedisc unit and (see press page 42). OPEN/CLOSE 0-9 ENTERRETURN Enter the password Then press ENTER. with number buttons (0-9). (_ (_ (_ (Z_)(_ (_ If you interrupt the entering, press RETURN.
VCR DVD setup language The setup language can be selected. ...... SETUP _ RETURN ENTER Press VCR DVD selector to select the DVD mode. VCR BVB Q 2 "Reading" changes to "No Disc". (If DVD disc has already loaded, the playback will start automatically.) Press SETUP in the stop mode. Press • or • to select "Other". Press select press • or ENTER and then • or • to desired language (e.g. English), then press ENTER.
menu language You can select the language of the disc menu messages of DVDs. ii/:_!!!ii'!i_'!ii _!_ _,_, i SETUP Press SETUP theselect stop "Language". mode or No Disc. Press • or • in to VCR MENU SETUP To RETURN make SETUP screen disappear, pressisSETUP or while the SETUP screen being displayed. VCR MENU SETUP RETURN Press "Menu". • or ENTER, then )ress • or • to select Press or ENTER. Press •• or • to select _our desired language, then press ENTER.
subtitle language ,iI _, ii_ ,_i , ,_iiii_ The same subtitle language can always be selected even if you replace the disc or turn the power off. SETUP To make SETUP screen disappear, press SETUP or RETURN while the SETUP screen is being displayed. Press SETUP in the stop mode or No Disc. Press • or • to select "Language". VCR MENU SETUP VCR MENU SETUP RETURN Note: Press • or ENTER, then press • "Subtitle".
audio soundtrack language The same audio soundtrack language can always be selected by your unit even if you replace the disc or turn the power off. ii/_:_!!!ii'!i_'!ii _!_ _,_,, i SETUP Press SETUP in the stop mode or No Disc. Press • or • to select "Language". To RETURN make SETUP screen disappear, pressisSETUP or while the SETUP screen being displayed. VCR MENU SETUP VCR MENU SETUP RETURN Note: Press • or ENTER, then select"Audio". press • or • to Press •• or Press orENTER.
code list Enter the appropriate code number for the initial settings "Menu", "Subtitle _ and/or"Audio" (see pages 64-66), Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925 Amharic 1123 Galician 1722 Malay 2329 Spanish 1529 A
fore calling service personnel Check the following guide for the possible cause of a problem SYMPTOMS before contacting service. POSSIBLE SOLUTIONS IPAGE i ; oNc DVDNCR does not operate. Make sure the power cord is plugged in. Try another AC oudet. Power is off, check fuse or circuit breaker. Unplug unit, then pfug it back in. Select the DVD or VCR mode before operating. 5 5 30,42 14-17 22 No picture. • Antenna connection is not correct or antenna cable is disconnected.
General Power supply Power consumption Weight Dimensions Tuner Antenna input/output RF channel output Color system Video head Audio track Hi-Fi frequency response Hi-Fi dynamic range EFWD/REW time at 25% (77°F) Applicable disc Frequency range S/N ratio Harmonic distortion Wow and flutter Operating conditions AC 120 V 60 Hz Operation: 18 W, Stand by: 2 W 7.9 Ibs (3.6 kg) Width: 16-15/16 inches (430 mm) Height: 3-7/6 inches (99 ram) Depth: 9-7/8 inches (251.5 mm) 181 channel freq.
LIMITED WARRANTY DVD VIDEO PLAYER Toshiba America Consumer Products, Inc. ("TACP'), Toshiba Hawaii ("THI") and Toshiba Canada Limited ("TCL") make the following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from the odginal purchaser and to no other purchaser or transferee.
LIMITED WARRANTY DVD VIDEO PLAYER (continued) How to Obtain Warranty Service (1) Refer to the troubleshooting guide in your owner's manual. This check list may solve your problem. (2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days after you find a defective product or part. (3) Arrange for the delivery of the product to the TACPFi-HI/TCL Authorized Service Station or TACP Return Center.
TOSHIBA IIIIIIII IIIIIIIIIIIIII "J2C51501C* 03/08 [] Printed in Thailand
