Introduction Preparations PORTABLE DVD PLAYER Playback SD-P91SKY OWNER’S MANUAL DIGITAL VIDEO Function Settings Connections Others T 01_SD-P91SKY_Eng_01-54.
Introduction SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: This equipment employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.
Model No. Serial No. Retain this information for future reference. Introduction In the spaces provided below, record the Model and Serial No. located on the bottom of your DVD player. About disposal The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury. Please follow local ordinances or regulations when you dispose of the product. 3 01_SD-P91SKY_Eng_01-54.
SAFETY PRECAUTIONS Introduction Location of the required label 4 01_SD-P91SKY_Eng_01-54.
IMPORTANT SAFETY INSTRUCTIONS This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7.
Introduction IMPORTANT SAFETY INSTRUCTIONS ADDITIONAL SAFETY INSTRUCTIONS 12. When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damaged. 18. Do not touch a spinning disc. When you open the disc holder, the disc may have not stopped spinning. Touching a spinning disc may cause personal injury or damage to the product. 13.
24. CAUTION: If the DVD player is dropped and the cabinet or enclosure surface has been damaged or the DVD player does not operate normally, take the following precautions: • ALWAYS turn off the DVD player and unplug the power cord to avoid possible electric shock or fire. • NEVER allow your body to come in contact with any broken glass or liquid from the damaged DVD player. The LCD panel inside the DVD player contains glass and a toxic liquid.
Introduction IMPORTANT SAFETY INSTRUCTIONS h) Never dispose of used battery packs with other ordinary solid wastes, since they contain toxic substances. Always dispose of used battery packs in accordance with community regulations that apply to the disposal of batteries. Cover the metal terminals with insulating tape, in order to prevent accidental short-circuiting. i) j) Always confirm that the battery pack is compatible with your player, before attaching the battery pack to the player.
29. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 30. Following mark means “CAUTION - RISK OF ELECTRIC SHOCK - DO NOT OPEN”. 31. Vehicle adapter and operation in a car a) NEVER operate the apparatus or view a DVD Video while operating an automobile or other vehicle. Note: doing so is illegal in many jurisdictions. NEVER place an apparatus within the eyesight of a driver while he/she is driving an automobile/vehicle.
Introduction IMPORTANT SAFETY INSTRUCTIONS e) When handling, using or storing the adapter power cord NEVER: - Place or locate near any apparatus that produces heat. - Disassemble, splice or extend the cord. - Pull, force or place any heavy objects on the cord. - Bend, twist or bind the cord. k) Some cars may not have a compatible socket. NEVER modify this adapter to fit an incompatible cigarette lighter socket and/or power port.
Precautions Notes on use in a vehicle Do not shock the LCD monitor. It may cause unit damage and malfunction. Do not use this product while driving. Neglecting this may cause a traffic accident. Do not use the player in a place subject to vibration. Neglecting this may cause malfunction of the player or damage to the disc. Never operate the player in a moving vehicle. Vibration may prevent proper playback of the player or cause damage to the disc.
Introduction Precautions (continued) Notes on moisture condensation Moisture condensation damages the player. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the player. Moisture condensation occurs during the following cases.
This owner’s manual explains the basic instructions of this player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the player may not respond to all operating commands. This is not a defect in the player. Refer to instruction notes of discs. Notes on region numbers The region number of this player is 4. Region numbers, corresponding to specific geographical playback area, are printed on your DVD video disc.
Introduction Table of contents Introduction Playing a disc...................................................... 34 SAFETY PRECAUTIONS...................................... 2 IMPORTANT SAFETY INSTRUCTIONS............... 5 Precautions ......................................................... 11 Identification of Controls .................................. 16 Accessories ....................................................... 19 Notes and Information.......................................
Selecting subtitles .............................................. 44 Selecting a playback sound............................... 45 Connecting to an audio system equipped with analog audio inputs...............................................67 Playing audio/video/picture files ....................... 46 Using the automobile/vehicle adapter or power port ........................................................... 68 Selecting the sound enhancement ................... 50 To turn the LCD monitor .........
Identification of Controls Introduction Instructions and actual buttons Most instructions are based on remote control operation, unless otherwise noted. You can use the buttons on the remote control and those on the main unit as well when they have the same function. Some functions are available only from the remote control. Main Unit See page in for details. LCD monitor swivels 180 degrees around.
Right side Headphone jacks (× 2) 33 To connect headphones AV IN jack 65 Connect to AV output terminal of your video equipment BITSTREAM/PCM jack 66 Connect to Digital Out jack of your amplifier AV OUT jack 64 Connect to AV input terminal of your TV Introduction DC IN 12V jack 25 To connect the AC adapter (supplied) Volume control 35 To adjust the volume Left side USB port 52 POWER switch 29 To connect a To turn on and off the player USB flash drive Front POWER indicator 29 To display the conditio
Identification of Controls (continued) Remote control See page in 14 E.A.M.
Accessories Remote control (MEDR16UX) Coin-shaped battery (CR2025) Audio/video cable Power cord* AC adapter* (ADPV16A) Battery pack* (SD-PBP91E) Headphones Carrying case Vehicle adapter* (MEDC01AX) Use this for carrying, etc. of the player. Introduction Check that the following accessories are supplied. Owner’s manual * Do not use an AC adapter, a power cord, a battery pack and a vehicle adapter other than one specified.
Introduction Notes and Information Playable discs This player can play the following discs. Disc Disc Mark DVD Video disc Disc Size DN DN Contents r7JEFP NPWJOH QJDUVSFT "VEJP DVD-RW DN r7JEFP "VEJP %7% 73 GPSNBU DPNQBUJCMF XJUI $13. %7% WJEFP GPSNBU * 'JOBMJ[FE EJTDT POMZ r.PWJF %JW9 DVD-R DN r7JEFP "VEJP %7% 73 GPSNBU DPNQBUJCMF XJUI $13. %7% WJEFP GPSNBU * 'JOBMJ[FE EJTDT POMZ r.
On VIDEO CDs This player supports VIDEO CDs equipped with the PBC (Version 2.0) function. (PBC is an abbreviation for Playback Control.) You can enjoy two playback variations depending on types of discs. Introduction Notes • You cannot play discs other than those listed left. • You cannot play discs of DVD-RAM or non-standardized discs, etc., even if they may be labeled as left. • This player uses the PAL/NTSC colour system, and cannot play DVD video discs recorded in any other colour system (SECAM, etc.
Introduction Notes and Information (continued) On handling discs Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping. Do not touch the playback side of the disc. Do not attach paper or tape to discs. Playback side On cleaning discs Fingerprints and dust on the disc may cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.
Preparations Preparations before using. Preparation of the remote control Power connection Using the battery pack Powering on/off Changing the mode 01_SD-P91SKY_Eng_01-54.
Preparation of the remote control Preparations Insert the specified battery to the remote control. See page 8 , 9 for safety use of coin-shaped batteries. Point the remote control at the remote sensor and press the buttons. 1 Gently insert a fingernail in groove and pull out the holder in direction Operating with the remote control . Backside 1 Within about 3 m (9.9 feet) 2 Take care not to break your fingernail. battery (CR2025) with the side up on the holder.
Power connection Connect the supplied AC adapter to wall outlet as below. Follow steps 1 to 3 to connect. When disconnecting, reverse this order. 2 Preparations To the DC IN 12V jack CAUTION • Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or electric shock. • Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
Using the battery pack Preparations The supplied battery pack (lithium ion battery pack) can power the player for operation outdoors or in a place with no outlets. WARNING • Do not use a battery pack other than one specified as it can result in a fire or damage to the unit. • Do not heat, open, or short-circuit the battery pack. Do not throw the battery pack into a fire. Doing so may cause an explosion or a fire. • Attach the battery pack properly following the explanation below.
Charging the battxery pack The battery pack needs to be charged before use. (The battery indicator is shown in the upper left corner of the screen when the power in the battery pack is running low.) Perform a full charge before the first use. 1 Turn off the player. 2 The battery pack cannot be charged when the player is on. Be sure to turn off the player before charging the battery pack. Attach the battery pack to the player. 3 Connect the supplied AC adapter and the power cord to the player.
Using the battery pack (continued) Detaching the battery pack Preparations 1 Turn the player off. 2 Disconnect the AC adapter and the power cord from the player. 3 Turn the player upside down. Important • After detaching the battery pack, be sure to close the battery cover in order to avoid a short-circuiting which may be caused by contact with metal objects to the connector. • Do not detach the battery pack while the POWER indicator illuminates in green or orange.
Powering on/off Slide the power switch to turn the power on or off. Condition POWER indicator On Green Off Off Charging Orange Preparations Power switch POWER indicator Power Switch 29 01_SD-P91SKY_Eng_01-54.
Changing the mode Preparations You can enjoy various contents of discs, USB flash drives and other external equipments by changing the mode. Change it depending on your needs. Press MODE repeatedly to select the mode. Each time you press MODE, the mode changes on the screen as below. Select when you want to play a disc on the LCD monitor of this player. (Normal) • Make sure that (Normal) is selected when you play a disc. Cannot be played any discs other than normal mode.
Playback Play your favorite disc. Loading a disc Changing the camera angle Connecting to headphones Selecting subtitles Playing a disc Selecting a playback sound Changing a playback speed Playing audio/video/picture files Playing a desired scene Selecting the sound enhancement Playing in random order Playing repeatedly Playing in a favorite order Zooming a picture 01_SD-P91SKY_Eng_01-54.
Loading a disc For disc compatibility information, see page 20 . 1 Open the LCD monitor. 4 Close the disc cover. Press CLOSE. Playback To remove the disc 2 Press OPEN on the main unit. Press OPEN on the main unit to open the disc cover and remove the disc from under the rim while gently pressing down on its center. The disc cover opens. Before using the player for the first time, remove the protective sheet beneath the disc cover. 3 Set a disc.
Connecting to headphones You can connect headphones to the headphone jack using a stereo mini plug. Stereo mini plug ( 3.5mm) Connect either of these jacks. Playback CAUTION • Keep your fingers clear of the disc as it is spinning. Neglecting to may cause serious personal injury. • Be careful not to catch your fingers in the disc holder. • Do not use a cracked, deformed, or repaired disc. • Do not tilt, shake or move the main unit while playing. It may damage the disc.
Playing a disc DVD-V VCD CD Preparations • • Turn on the power of the player. Place a disc to the player. Playback Caution Never operate the player in a moving vehicle. Vibration may prevent proper playback of the player or cause damage to the disc. 1 Press MODE repeatedly to select (Normal). 2 Press PLAY. Playback starts. • If you select a DVD video disc that contains a top menu, or select a PBC (Playback Control)-featured VIDEO CD, a menu may appear. See “Using the top menu” 35 .
Pausing playback (Still mode) Press PAUSE/STEP during playback. The picture gets still and sound is muted. To resume normal playback, press PLAY. Using the top menu DVD-V VCD CD 1 Press TOP MENU. 1 2 3 4 The top menu appears. 2 Press / / / to select the title you want. If the titles in the top menu are assigned a number, you can select the title by pressing number buttons. 3 Press ENTER. Playback Adjusting the volume of the speakers or the connected headphones e.g.
Playing a disc (continued) About the screen saver Playback If 20 minutes elapse while the power is on and there is no disc in the player or while the disc is stopped, the screen saver is automatically displayed (when “Screen saver” (refer to “Function Settings”) is set to “On” ). To turn off the screen saver, press any button on the main unit or remote control.
Changing a playback speed Playing in fast reverse or fast forward DVD-V VCD CD Press REV or FWD on the remote control during playback. : Fast reverse playback : Fast forward playback DVD-V VCD CD Press PAUSE/STEP repeatedly during playback. The sound is muted during frame by frame playback. Press PLAY to resume normal playback. Playback Each time you press the REV or FWD button, the playback speed changes.
Playing a desired scene DVD-V VCD CD Skipping chapters or tracks 2 Press / to select the category you want to search. 1 Press SKIP ( / ) repeatedly to locate the chapter or track you want. Playback starts from the selected chapter or track. Playback : Playback starts from the beginning of the next chapter or track. : Playback starts from the beginning of the current chapter or track. When you press twice, playback starts from the beginning of the preceding chapter or track.
Notes • Press the CLEAR button while pressing the SHIFT button resets the numbers. • Some discs may not respond to this process. • Some scenes may not be located precisely as you specified. Marking the desired position to locate (Bookmark function) 1 During playback, press T repeatedly to display “Bookmark”. You can register up to 3 bookmarks. 1 At a scene where you want to register a bookmark, press PAUSE/STEP to pause. 2 Press T repeatedly to display “Bookmark”.
Playing in random order Playing repeatedly DVD-V DVD-V VCD CD 1 During playback, press RANDOM to Playback display “Shuffle On” on the screen. VCD CD Repeating a specific segment 1 Press A-B RPT at the beginning of the Each time you press the button, the random mode “Shuffle On” and “Shuffle off” alternate. segment (point A) you want to play repeatedly. The mode on the screen will disappear in a few seconds if not operated. “Rep A-” appears.
Repeating a title, chapter or track 1 During playback, press REPEAT repeatedly to select the repeat mode. Each time you press the button, the repeat mode changes on the screen. Disc Mode Repeating range DVD-V Repeat Chapter Current chapter DVD-V Repeat Title Current title VCD CD Repeat single Current track VCD CD Repeat all Whole disc Repeat off Returns to normal playback. DVD-V VCD Playback Repeat playback starts after finishing the current chapter or track.
Playing in a favorite order DVD-V VCD CD 1 During stop, press MEMORY. The programming display appears. Enter a track number when using a VIDEO CD. Program 1 2 Title 1 3 4 Title 2 5 6 Title 3 7 8 Title 4 9 10 11 12 13 14 15 16 Playback Title 6 Play Program to select “Play Program” then press ENTER. The player starts memory playback. e.g.
Zooming a picture DVD-V VCD CD To resume normal playback 1 Press ZOOM during playback. Press ZOOM repeatedly until “Off” appears. The zoom icon appears. This operation is available also during slow, still, fast forward or fast reverse playback. x2 level. Playback 2 Select the zoom point and magnification Notes • Some discs may not respond to zoom feature. • Depending on scenes, the buttons may not work as described. • Zooming does not work on characters selected on menus.
Changing the camera angle Selecting subtitles DVD-V DVD-V VCD CD 1 Press ANGLE while playing a scene recorded with multiple camera angles. The angle icon ( ) appears on the screen. Playback e.g. CD 1 Press SUBTITLE during playback. The current subtitle setting is displayed. 2 Press SUBTITLE while the subtitle setting is displayed on the screen. Number of angles Angle icon Current angle This display does not appear if the disc includes no scenes recorded with multiple angles.
Selecting a playback sound Good morning! DVD-V VCD Bonjour! ¡Buenos días! CD 1 Press AUDIO during playback. The current audio setting is displayed. Selecting sound channels of VIDEO CDs During playback, press AUDIO repeatedly to select the sound channel. e.g. 1/3 D 2 ch Eng 2 Press AUDIO while the audio setting is displayed on the screen. Notes • Some discs allow you to change audio selections only via the disc menu.
Playing audio/video/picture files DVD-V VCD CD You can play audio CDs, MP3 (audio), DivX® (video) or JPEG (picture) files on this player. MP3 or DivX® disc compatibility with this player Playback Playable discs Sampling Frequency Bit rate CD physical format File system File name Total number of files DivX codec version DivX resolution CD-ROM, CD-R, CD-RW, DVD-R, DVD-RW 32 kHz, 44.
To select the category of file 1 Insert a disc you want to play. 1 Select “Filter” using ENTER. The menu appears. e.g. 1/8 /Track01.CDA Track01 Filter Track02 Repeat : Off Track03 Mode : Normal Track06 Music Playing Track07 Track08 2 Select the track/file you want to play using / then press ENTER or PLAY. Playback starts. / then press Audio Photo Video Playback Track05 / The screen appears as below. The check mark ( ) appears next to the category currently selected. e.g.
Playing audio/video/picture files (continued) Playing repeatedly Select “Repeat” on the screen using during playback then press ENTER. / / / Playback Each time you press ENTER, the repeat mode changes. Note of audio file playback • The BITSTREAM/PCM jack outputs MP3 or DivX® sounds in the linear PCM format regardless of the current “Digital Out” selection. (Refer to “Function Settings”) Off: Resumes to normal playback. Single: Repeats current track. All: Folder: Repeats all tracks in order.
Playing in a favorite order To display recorded track/file You can combine your favorite track/file and play in the order you determine. Select “Browser view” on the screen then press ENTER. 1 Select “Edit mode” on the screen using / / / then press ENTER. The track/file list of the disc appears. To cancel the programmed selections to the screen 3 Select track/file you want to play using press ENTER. The check mark ( track/file. 1 Press STOP twice to stop playback.
Selecting the sound enhancement Adjusting the picture DVD-V DVD-V VCD CD 1 Press E.A.M.* The current sound enhancement setting appears. * E.A.M. = Enhanced Audio Mode Playback 2 Press E.A.M. repeatedly. • [3D Off] Normal sound. • [3D On] To obtain expansive virtual surround sound effects from just two speakers. Notes • Actual effects to sounds may vary depending on the speaker system. Make the selection to your preference. • Actual effects to sounds may vary depending on the disc.
On-screen Display mode DVD-V 3 Press / to adjust the value. VCD CD 1 Press DISPLAY while pressing SHIFT during playback. Invert Invert the picture on the screen. Brightness 0 (Darker) to 16 (Brighter) Color 0 (Paler) to 16 (Deeper) Screen 4:3: e.g.: DVD video disc Elapsed time of the current title Current chapter or track number Current title number DVD Video Title Audio Subtitle Angle 2/3 1/2 D 3/2.
Playing the files stored on a USB flash drive You can play the files in MP3, DivX® or JPEG format stored on a USB flash drive by connecting it to this player. Playback Before connecting a USB flash drive, refer to page 46 and confirm the files you want to play are playable on this player. 1 Turn on this player and press MODE repeatedly to select “ (USB)”. 2 Insert a USB flash drive into the USB port of this player. 3 Select the folder/file you want to play using / , then press ENTER or PLAY.
To remove a USB flash drive 1 Press MODE repeatedly to select “ (AV input)”). (or “ (Normal)” 2 Remove the USB flash drive from the USB port of this player. Playback Notes • While the contents of the USB flash drive is being accessed to, or the access lamp of the USB flash drive is blinking, be careful not to remove the USB flash drive, turn off this player or change the mode of this player. Neglecting to do so may cause loss of data.
01_SD-P91SKY_Eng_01-54.
Function Settings You can change the default settings to customize performance to your preference. Customizing the function settings 01_SD-P91SKY_Eng_55-80.
Customizing the function settings DVD-V VCD CD You can change the default settings to customize performance to your preference. 4 Change the selection by / or other buttons, by referring to the corresponding pages 58 , then press ENTER. 1 Press SETUP during stop. The setting menu appears. To change other settings, press 2 to 4. 2 Press / to select the icon of the setting (listed below) to change, then press . 5 Press SETUP. The setting menu disappears, and the procedure finishes.
Video Audio Default DVD-V VCD CD View Mode DVD-V VCD CD E.A.M. DVD-V VCD CD You can easily switch to a preferred audio enhancement. (E.A.M. = Enhanced Audio Mode) D.R.C. DVD-V VCD CD To turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late hours playback. (D.R.C. = Dynamic Range Control) Digital Out DVD-V VCD CD To select an output sound format corresponding to your system connection.
Customizing the function settings (continued) Language OSD Menu Audio DVD-V VCD CD English: To view on-screen displays in English. Subtitle DVD-V VCD VCD CD English: To play sound tracks in English. Note • Some DVD video discs may be played in a different language than you selected. A prior language may be programmed on the disc. CD English: To display subtitles in English. To display no subtitles.
DivX subtitle Western European: To display subtitles in west European language. Central European: To display subtitles in Central Cyrillic: European language. To display subtitles in Slavonic Cyrillic language. Video Aspect Ratio DVD-V VCD CD 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. 01_SD-P91SKY_Eng_55-80.indd 59 View Mode DVD-V VCD CD Fill: Pictures are expanded horizontally and vertically to fit the shape of the screen.
Customizing the function settings (continued) Digital Out Audio E.A.M. DVD-V VCD CD Normal: Normal sound. 3D: Function Settings To obtain expansive virtual surround sound effects from just two speakers. Note • Pressing the E.A.M. button on the remote control also allows you to achieve the same setup. D.R.C. DVD-V VCD CD On : Dynamic range is reduced. Off : DVD-V VCD CD Bitstream: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder.
3 Press / to select “Parental control” and enter the password you set then press ENTER. Rating Parental control DVD-V VCD CD To set the parental level 1 Press / / / to select “Parental control” and then press ENTER. The password setting display appears. 5 Press / to select the parental level to set and then press ENTER. 8 : Adult 7 : NC-17 6:R 5 : PG-R 4 : PG-13 3 : PG 2:G 1 : Kid Safe To change the parental lock level 1 Press / to select “Set password”.
Customizing the function settings (continued) To change your 5-digit security code 1 After selecting “Set password”, press the 9 button five times then press ENTER. The 5-digit security code is cleared. 2 After selecting “Set password”, press the number buttons to create a new 5-digit security code. PBC DVD-V VCD Function Settings No : To not restore the function settings to their default settings. To restore the function settings to their default settings.
Connections You can connect the player to a TV or audio system. Viewing on a connected TV Viewing pictures from connected video equipment Connecting to audio equipment Using the automobile/vehicle adapter or power port To turn the LCD monitor 01_SD-P91SKY_Eng_55-80.
Viewing on a connected TV You can connect a TV to this player to view playback picture on it. 1 Connect a TV to the AV OUT jack of this player. Signal flow Connections To AV OUT Connection to To video input this jack Yellow (Video) VIDEO IN disables the LCD of the player. White (Left) Audio/video cable (supplied) Notes • Refer to the owner’s manual of the connected TV as well.
Viewing pictures from connected video equipment You can use the LCD of this player to monitor pictures of connected video equipment. 1 Connect video equipment to the AV IN jack of this player. 2 Press MODE repeatedly so that “ (AV input)” appears on the LCD. The player is ready to display pictures of the connected equipment on the LCD.
Connecting to audio equipment You can enjoy high quality dynamic sounds by connecting the player to audio equipment. Connecting to an AV amplifier (via digital audio input) The connecting method depends on the types of audio input, digital or audio. Signal flow Connections Select the method according to the type of your equipment. Caution • When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
CAUTION • When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Digital Out” to “PCM” from the on-screen displays 60 . Otherwise, high volume sound may damage your hearing as well as the speakers. • When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog audio output jacks.
Using the automobile/vehicle adapter or power port Connections For use of the DVD player in a car, this adapter can power the DVD player from the cigarette lighter socket. WARNING • NEVER operate the DVD player or view a DVD Video while operating an automobile or other vehicle. Note: doing so is illegal in many jurisdictions. NEVER place a DVD player within the eyesight of a driver while he/she is driving an automobile/vehicle.
1 Be sure to turn off the DVD player then remove the battery pack from the player. (Note: Charging the battery pack with the vehicle adapter may cause smoke, fi re of electrical shock to human body. ALWAYS remove the battery back before using the vehicle adapter.) 2 Turn on the vehicle engine so that the cigarette lighter socket or power port is powered. In some vehicles the cigarette lighter socket or power port is powered even when the vehicle’s engine is not running.
Connections Using the automobile/vehicle adapter or power port (continued) • Do not force the adapter into an incompatible lighter socket or power port. • Avoid dropping the adapter or placing heavy objects on it. Never use the damaged adapter. • Do not pull the adapter power cord when removing it from a socket or power port. Always grasp and pull the body. Failure to do so could cause damage to and malfunction of the adapter.
To turn the LCD monitor You can turn the LCD monitor 180 degrees. To put back the LCD monitor To turn the LCD monitor 1 Open up the LCD monitor vertically. 1 Put the player on a level place such as a desk. 2 While holding the lower side of the player, turn the LCD monitor slowly 180 degrees to the direction of “REVERSE” until it clicks. 2 Open up the LCD monitor vertically.
01_SD-P91SKY_Eng_55-80.
Others Useful informations. Output sound conversion table Before calling service personnel Specifications 01_SD-P91SKY_Eng_55-80.
Output sound conversion table Audio selection and outputs Discs DVD video discs VIDEO CDs AUDIO CDs Sound recording system Dolby Digital 48 kHz 96 kHz DTS MPEG1, MPEG2 MPEG1 Linear PCM 44.
Before calling service personnel Check the following guide for the possible cause of a problem before contacting service. Symptom No power. The LCD turned off by itself. No picture on the LCD monitor. No picture. (Other than built-in LCD monitor) No sound. The playback picture has occasional distortion. Cause • The AC adapter or power plug is disconnected. • The battery pack has been removed. • Battery empty. • The automatic LCD off function turned the LCD off. • The AV OUT jack is connected.
Before calling service personnel (continued) Symptom The player does not start playback. Playback does not follow the course of the disc’s program. Buttons do not work. This player does not display the files stored on a USB flash drive connected. Others The remote control does not work properly. Cause • No disc is inserted. • An unplayable disc is inserted. • The disc is inserted upside down. • The disc is not inserted securely. • The disc is dirty. • The parental lock function is set.
Specifications Player Power supply DC 12 V (Rated current : 2 A (Maximum: during battery pack charging)) 100 – 240 V AC, 50/60 Hz (with the supplied AC adapter) Mass approximately 1.35 kg External dimensions 267 × 34 × 167 mm (W/H/D) Signal system PAL/3.
Specifications (continued) Liquid crystal display Panel size 22.8 cm (9 inches diagonally measured) Projection system TN colour transmission Driving system Amorphous silicon TFT active matrix Resolution 640 (H) × 220 (V) pixels (effective pixel rate : more than 99.99%) Supplied accessories Audio/video cable..............................................................1 Remote control (MEDR16UX)..........................................1 Coin-shaped battery (CR2025).......................................
Others 79 01_SD-P91SKY_Eng_55-80.
© 2008 Toshiba Corporation 01_SD-P91SKY_Eng_55-80.
