DIGITAL VIDEO DVD/CD PLAYER SD-K750SU OWNER’S MANUAL © 2005 Toshiba Corporation Before operating the unit, please read this manual thoroughly.
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS PROVIDED IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
IMPORTANT SAFEGUARDS (Continued) 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. S3125A 13.
16. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17. Never insert objects of any kind into this apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the apparatus. 18. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. 19.
Introduction Precautions Notes on handling When shipping the DVD video player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD video player. Do not leave rubber or plastic products to contact the DVD video player for prolonged period. They will leave marks on the finish.
Notes on discs On handling discs Structure of disc contents Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks. DVD video disc DVD video disc Title 1 Chapter 1 Title 2 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Playback side Do not attach paper or tape to discs.
Introduction Notes on discs (continued) About this owner’s manual This owner’s manual explains the basic instructions of this DVD video player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD may not respond to all operating commands. This is not a defect in the DVD. Refer to instruction notes of discs. Playable discs This DVD video player can play the following discs. Disc Mark Contents Disc Size Maximum playback time Approx.
Table of contents Introduction Advanced playback SAFETY PRECAUTIONS ........................................ 2 IMPORTANT SAFEGUARDS ................................... 3 Precautions .............................................................. 6 Notes on discs ......................................................... 7 Table of contents ...................................................... 9 Identification of controls ......................................... 10 Front panel .............................
Introduction Identification of controls See the page in for details.
Display Information about the unit and the disc is shown here. There is no disc in the unit. The disc tray is open. DVD video disc Video CD/Audio CD • During playback • During playback The elapsed time (hh:mm) is displayed. The elapsed time at track (mm:ss) is displayed. • Full stop • Full stop The total time (mm:ss) is displayed. The unit cannot read the disc, or the disc may be damaged. The display may vary depending on the types of discs you play.
Introduction Identification of controls (continued) The instructions in this manual describe the functions on the remote control. See the page in for details.
Loading batteries 1 Open the battery compartment cover in the direction of the arrow. 2 Install two “R03/AAA” batteries (supplied), paying attention to the polarity diagram in the battery compartment. Operating with the remote control Point the remote control at the remote sensor and press the buttons. Within approx. 7 m (23 feet) Distance: Approx. 7 m (23 feet) from the front of the remote sensor Angle: Approx.
Connections Connecting to a TV Connect the DVD video player to your TV. Connecting to a TV Signal flow OUTPUT DIGITAL AUDIO AUDIO COMPONENT L VIDEO PB R Y PR S-VIDEO COAXIAL (white) (red) (yellow) To AUDIO OUT To VIDEO OUT To wall outlet To S-VIDEO OUT S-Video cable (not supplied) To S-Video input (yellow) Audio/video cable (supplied) To video input To audio inputs If the TV has an S-Video input, connect the DVD video player with an S-Video cable.
Component video outputs PROGRESSIVE outputs Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker. INTERLACED outputs Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality DVD picture playback.
Connections Connecting to optional equipment You can enjoy high quality dynamic sounds by connecting the unit to optional audio equipment. For connection to your TV, see “Connecting to a TV” " # .
Warning When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT (L/R) jacks of the DVD video player are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) cables dangling.) To enjoy DTS Digital Surround™ playback, an external 5.
Basic playback Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. OPEN/CLOSE Disc tray DVD VCD CD Power indicator Display window STOP PLAY ON/STANDBY Basic playback Preparations: • When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD.
POWER OPEN/CLOSE C/D/B/A ENTER PLAY PAUSE/STEP STOP To obtain a higher quality picture Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this unit, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
Basic playback Playing a disc (continued) You can play discs at various speeds. DVD VCD CD PAUSE/STEP PLAY SKIP / FF SLOW / REW Playing in fast reverse or fast forward directions To resume normal playback Press PLAY. Press REW or FF during playback. REW: Fast reverse playback FF: Fast forward playback Each time you press REW or FF, the playback speed changes. DVD VCD Notes: • The DVD video player mutes sound and subtitles during reverse and forward scan of DVD/VCD video discs.
Advanced playback Zooming/Locating desired scene ZOOM C/D/B/A ENTER CLEAR DISPLAY SEARCH 0–9 DVD VCD CD Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. 1 Press ZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). 1 2 D/B B/A A to view a different part of the Press C/D frame.
Advanced playback Marking desired scenes ENTER C/D The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. CLEAR MARKER DVD VCD 1 Marking the scenes DVD VCD 1 Press MARKER during playback. Marker 1 Marker 2 Marker 3 Returning to the scenes Press MARKER during playback or stop mode. /Enter/Clear/Marker 2 Marker 1 00 27 54 Marker 2 01 16 25 Marker 3 02 08 31 /Enter/Clear/Marker Select the blank Marker using C or D.
Repeat playback/A-B Repeat playback D/B/A PLAY A-B RPT PLAY MODE DVD VCD CD 1 2 DVD VCD CD Repeat playback Press PLAY MODE during playback or stop mode. A-B Repeat playback A-B repeat playback allows you to repeat material between two selected points. 1 Press A-B RPT during playback. The start point is selected. A DVD A to select “Chapter” or “Title”. Press B/A The unit automatically starts repeat playback after finishing the current title or chapter.
Advanced playback Program playback/Random playback ENTER C/D/B/A CLEAR PLAY SKIP PLAY MODE You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD, Video CD and MP3/WMA/JPEG CD. 0–9 VCD CD 1 Program playback 4 Press PLAY MODE during stop mode. Play Mode : Off Repeat : Off /Play Mode D/B B/A A to select “Program Playback” Press C/D and press ENTER.
TOP MENU MENU C/D/B/A ENTER Changing angles/Title selection/DVD menu PLAY ANGLE DVD Changing angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE during playback. The current angle will appear. 2 Press ANGLE repeatedly until the desired angle is selected. 1/9 Note: Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.
Advanced playback Changing soundtrack language/ Setting surround sound B/A AUDIO DVD VCD Changing soundtrack language You can select the language when you play a multilingual disc. 1 Press AUDIO during playback. The current soundtrack language will appear. In case of Video CD playback Audio type changes as follows each time you press AUDIO. LR QSound Off 2/8 Fra Dolby Digital QSound Off 2 Press AUDIO repeatedly until the desired language is selected.
▲/▼/ / ENTER Subtitles/To turn off the PBC/Disc status PLAY MODE 1 DISPLAY SUBTITLE DVD DVD VCD CD Subtitles When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. 1 Disc status With each press of DISPLAY, the status of the disc will appear on the screen and change as follows. Press SUBTITLE repeatedly during playback until your desired language appears.
Advanced playback MP3/WMA/JPEG operation This player can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA JPEG-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG-encoding Software (not supplied). The Apple-HFS-System cannot be played.
TOP MENU ▲/▼/ / ENTER STOP PLAY 0–9 MP3/WMA CD playback CD 1 2 Place a disc on which MP3 or WMA files have been recorded onto the disc tray. A file menu screen will appear on the screen. A or ENTER to select folder. Press B/A 1 3 , ) !" # # " $% &! ' ( ' # " - , * + , & - . + * / " +0 2 3 4 &. 5 Press STOP to end playback. STOP • The unit records the stopped point.
Advanced playback TOP MENU MENU ▲/▼/ / ENTER STOP PLAY PAUSE SKIP / MP3/WMA/JPEG operation (continued) 0–9 ANGLE CD 1 2 JPEG CD playback CD Place a disc on which JPEG files have been recorded onto the tray. A file menu screen will appear on the screen. A to select folder.
Function setup Customizing the function settings SETUP You can change the default settings to customize performance to your preference. C/D/B/A ENTER RETURN DVD VCD CD 1 Setting procedure Press SETUP during stop mode. The following on-screen display appears. 5 To make SETUP screen disappear, press SETUP or RETURN. /Enter/Setup/Return 2 Press B or A to select the desired section, then press D or ENTER. 3 Press C or D to select the desired option.
Function setup Customizing the function settings (continued) Setting details Section Option Details Menu Subtitle Audio To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are available on the disc . OSD To select a preferred language for on screen display. E.B.L. To select On or Off for E.B.L. (Enhanced Black Level). 33 Tv Screen To select a picture size according to the aspect ratio of your TV.
Menu Subtitle Audio OSD English English English English E.B.L Off 4:3 Tv Screen On Display Auto Picture Mode JPEG Interval Off /Setup/Return /Setup/Return Menu, Subtitle, Audio E.B.L. You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” on page 37).
Function setup Customizing the function settings (continued) Setting details Picture Mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Auto: Film: Select this position normally.
Password Parental Select Files Output ---Off All Interlace /0Ð9/Enter/Clear/Setup/Return Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1) Press C or D to select “Parental”, then press B or A until the level you require appears. • Level Off: The parental control setting does not function. • Level 8: All DVD software can be played back. • Level 1: DVD software for adults cannot be played back.
Function setup OPEN/CLOSE Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. ENTER ▲/▼ RETURN PLAY 0–9 1 Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit (see page 18). 4 Enter the password with Number buttons (0–9). Then press ENTER. To exit from the entry, press RETURN.
Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 33).
Others Troubleshooting guide Check the following guide for the possible cause of a problem before contacting service. Page Symptom Cause Correction No power. • The power plug is disconnected. • Connect the power plug securely into the wall outlet. 14 No picture. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV so the picture from the DVD video player appears on the TV screen. – • The video cable is not connected securely.
Specifications DVD Video Player Power supply 120 V AC, 60 Hz Power consumption Operation : 10 W Standby : 3 W Mass 4.4 lbs (2.0 kg) External dimensions Width : 16 - 15/16 inches (430mm) Height : 1 - 7/8 inches (47mm) Depth : 8 - 1/16 inches (205mm) Signal system Standard NTSC Pickup CD : Wavelength: 775 - 815 nm Maximum output power: 0.5 mW DVD : Wavelength: 650 - 666 nm Maximum output power: 2.0 mW Frequency response DVD : 4 Hz - 22 kHz CD : 4 Hz - 20 kHz Harmonic distortion 0.
Limited warranty Limited United States Warranty DVD Players - Exchange Warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.
Limited warranty (continued) How to Obtain Warranty Services If, after following all of the operating instructions in this manual and checking the section “Troubleshooting,” you fund that service is needed: (1) For instructions on how to obtain warranty service for exchange program DVD Players, contact TACP’s Call Center toll free at 1-866-583-7353.
Memo .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. ............
Memo .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. ............
Printed in Thailand 2F10101A [E] P40-BACK 44 1/18/05, 6:38 PM
REPRODUCTOR DE DVD SD-K750SU Referencia rápida 1 ALL DIGITAL VIDEO PRECAUCIONES DE SEGURIDAD PRECAUCION RIESGO DE DESCARGA ELECTRICA NO ABRIR AVISO:PARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA, NO RETIRE LA CUBIERTA (O POSTERIOR). EN EL INTERIOR DEL APARATO NO HAY COMPONENTE ALGUNO QUE PRECISE SERVICIO DE MANTENIMIENTO A CARGO DEL USUARIO. SOLICITE CUALQUIER OPERACION DE MANTENIMIENTO A PERSONAL DE SERVICIO CALIFICADO.
INSTRUCCIONES IMPORTANTES SOBRE SEGURIDAD PRECAUCIÓN: LEA Y OBSERVE CUIDADOSAMENTE TODAS LAS ADVERTENCIAS E INSTRUCCIONES OFRECIDAS EN ESTE MANUAL DE INSTRUCCIONES, Y LAS MARCADAS EN LA UNIDAD. GUARDE ESTE MANUAL PARA FUTURAS REFERENCIAS. Este aparato ha sido diseñado y fabricado para asegurar la seguridad personal. La utilización inadecuada podría resultar en descargas eléctricas o en incendios.
Conexión a un televisor Flujo de la señal OUTPUT DIGITAL AUDIO AUDIO COMPONENT L VIDEO PB R Y PR S-VIDEO COAXIAL (blanca) (roja) (amarilla) a S VIDEO OUT a AUDIO OUT a VIDEO OUT Cable de video S (no suministrado) a la entrada de video S (amarilla) Cable de audio/video (suministrado) a la entrada de video (roja) a la entrada de audio (blanca) Si el televisor posee entrada de video S, conecte el reproductor de DVD con un cable de video S.
Reproducción básica (continuación) Reproducción rápida en sentido regresivo o progresivo Presione REW o FF durante la reproducción. Selección del idioma OSD 1. Presione SETUP en el modo de parada o no hay disco. opción. 2. Presione para seleccionar 3. Presione o ENTER. 4. Presione o para seleccionar “OSD”. 5. Presione o para seleccionar el idioma deseado. 6. Presione SETUP o RETURN para cerrar la pantalla. El idioma no cambia (cambia el idioma de la OSD).
