Manual

• Output sound conversion table
Multi channel sounds 2 channel stereo sounds
Output
Dolby Digital I
Stereo
Mult_
i
DVD Linear PCM
video disc DTS Bitstream
MPEG1, MPEG2 StereoMult_
DVD audio disc (LPCMt PPCM)
VIDEO CD
Linear PCM 441 kHzJ16 bit
Audio CO
I No decode
DTS
MP3
BITSTREAM/PCM
lack
"Digital Output"
aitstream
aitstream
PCM
aitstream
aitstream
aitstream
PCM
PCM
aitstream
PCM
5.10H AUDIO ANALOG OUT Jacks BITSTREAM]PCM jack
"UUP,-oLo_c"[_[_ "a_ita_Output"[_[_
"On" "Off"
Pro Logic O
O O
Pro Logic O
Pro Logic O
o o
o o
Pro Logic O
Pro Logic O
Noise Noise
O O
"Bit.stream" "PCM"
Bitstream
aitstream
Bitstream Bitstream
Bitstream
Bit.stream
PCM PCM
PCM PCM
Bitstream Bitstream
PCM PCM
2OH AUDIO
ANALOG OUT
Jacks
o
Noise
o
: 3D sound enhancement can function.
• When "Multi" is selected [_, the format of output signals from the BITSTREAM/PCM jack is fixed as shown in the above
table, regardless of "Digital Output" setting [61_.
• Some of multi-channel recorded DVD audio discs may not be permitted 2-channel mix playback. If you play such a disc on
this player connecting two speakers, you may obtain only the original left and right channel sound, and may not hear other
channels. This is because of the playback restriction of the disc. Refer to instructions of the disc for details. Such discs may
include the same contents recorded in stereo. Play it if available, by changing the audio setting.
• Signals of 88.2kHz or higher from the BITSTREAM/PCM jack are depressed to 44.1 kHz or 48 kHz by down sampling
process when:
- "3D" is selected. [_
-"PCM Down Sampling" is set to "On."
- a copyright protected disc is played.
- 't313Pro Logic" is set to "On." [_
• Quantization bit of signals of 20 bit or higher which is output from the BITSTREAM/PCM jack is 16 bit if they are in a
copyright protected disc.
<
m