TOSHIBA introduction Connections VIDEO/AUDIO _ [_I_IT£_L£_U[31U Basic playback DVD VIDEO/AUDIO PLAYER SD.4800 Advanced playback Quick control 0 VVNER'S MA N UAL •H..-..
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. In the spaces provided below, record the Model and Serial No.
IMPORTANT CAUTION: SAFETY INSTRUCTIONS PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
7, Do not block manufacturer's any ventilation instructions. openings. Install in accordance with the O 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. stoves, 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
IMPORTANT 13. Unplug this apparatus of time. SAFETY INSTRUCTIONS during lightning storms or when unused for long periods 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
18. Keep your fingers well clear of the disc tray as it is closing. Neglecting so may cause serious personal injury. to do a € 19. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and serious damage to the apparatus. O 20. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction.
• When shipping the DVD player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. • Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish. • The top and rear panels of the DVD player may become warm after a long period of use. This is not a malfunction.
on Discs a • Do not touch the playback side of the disc. O Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. DVD audio discs are divided into groups, and the groups are sub-divided into tracks. VIDEO CDs/audio CDs are divided into tracks. • DVD video disc _ Title 2 Title 1 _ € O ,' Playback side Chapterl • Chapter2 Chapter1 Chapter2 Chapter3 Do not attach paper or tape to discs.
on Discs (continued) This owner's manual explains the basic instructions of this DVD player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD player may not respond to all operating commands. This is not a defect in the DVD player. Refer to instruction notes of discs. This DVD player can play the following discs.
of Contents Introduction • SAFETY Advanced PRECAUTIONS .......................... • IMPORTANT SAFETY • Precautions ............................................... • Notes INSTRUCTIONS on Discs .......................................... Notes on region numbers ............................... • Table of Contents ................................... • Identification of Controls ....................... Front panel ..................................................... Rear panel ....................
of Controls See the page in[ _ for details. ON/STANDBY indicator [_ PAUSE button [_ OPEN/CLOSE NAVI button [_ MENU button button STOP button [_ Disc tray [_ PLAY button [_ PROGRESSIVE indicator [_ RETURN button [_ ON/STANDBY button [_ When connecting the optical digital cable, remove the cap and fit the connector into the jack firmly. _1 When not using the jack, keep the cap inserted _._'_'_ to protect it from dust intrusion.
• Pressing of the FL DIMMER button on the remote control changes the brightness of the display. FLDIMMER Play mode indicator Normal Dimmed _ Off Chapter number indicator Title number indicator Memory playback indicator Track number indicator Multifunctional DVDNIDEO _ Random playback indicator indicator (indicates operating status or messages, etc,) CD/CD indicator Angle icon indicator Repeat playback indicator • When you start playback, the elapsed time indicators appear.
of Controls (continued) The instructions in this manual describe the functions on the remote control See the page in [ _ for details. DVD power button [_ SETUP button [_ OPEN/CLOSE button [_ PROGRESSIVE E.
Open the cover. Point the remote control at the remote sensor and press the buttons. O Within about 7 m (23 feet) 12 Insert batteries (AAA size). Make sure to match the + and - on the batteries Distance: About 7 m (23 feet) from the front of the remote sensor Angle: About g0 ° in each the remote sensor direction of the front of to the marks inside the battery compartment. 13 Close the cover.
i_l_llliii_ll_l_i!i_l_i(_li!i_l_i(_ll_ill!l_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_li!i_l_i(_ _ a TV Connect the DVD player to your TM For details of output sound, see [43}. Signal flow To S VIDEO OUT ] _(red) I (white) _ {yellow) To wall outlet TO 2CH AUDIO To VIDEO OUT Set to '1.
INTERLACED outputs/inputs (ColorStream _) Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback. Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, C_, CR) In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.
iiii_il _iili_ii!i_i!i_!_l!i_li_!i_!_l!i_li_!_ii!ili_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i_li_!i_!_l!i__ nnecting to Optional Equipment You can enjoy high quality dynamic sounds by connecting optional audio equipment. • For connection to your TV, see "Connecting • For details of output sound, see [_.
Dolby Digital Manufactured under license from Dolby Dolby Digital is the surround sound technology used in theaters showing the Laboratories. "Dolby", "Pro Logic" and latest movies, and is now available to reproduce this realistic effect in the home. the double-D symbol are trademarks of Dolby Laboratories. Confidential You can enjoy motion picture and live concert DVD video discs with this dynamic unpublished works.
i_l_ilii_l_ii;I_i!i_I_!i_i_!i_I_!i_i_!Iii!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_!i_i_!i_I_ nnecting to Optional Equipment (Continued) Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.
O 5.tch surround sound The Dolby Digital decoder equipped with this DVD player enables you to obtain the full benefit of 5.1 channel sound tracks when you connect the DVD player to an amplifier equipped with 5.1 channel audio inputs, • Use DVD video discs encoded via the Dolby Digital recording system. Make the following setting. On-screen inputs [_ _,_? TO S.
a CAUTION Keep your fingers well clear of the disc tray as it is closing. DiSC This section shows you the basics on how to play a disc. Neglecting to do so may cause serious personal injury. ON/STANDBY •IV/ENTER 3 2, 4 PAUSE PLAY Preparations • When you want to view a disc, turn on the TV and select the video input connected to the DVD player. • When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD player.
• _PLAYsToP _PAGE PAUSE/STEP TO obtain a higher quality picture Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a let of information. While the amount of noise depends on the TV you use with this DVD player, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
iiii::ili''iii _ You can play discs at various speeds, and resume playback from the location where you stopped playback, PLAY Press REV (_) REV or FWD during playback. • TO resume normal playback Press PLAY. FWD REV : Fast reverse playback (_ PLAY FWD: Fast forward playback Each time you press the REV or FWD button, the playback speed changes, Notes • The DVD player mutes sound and omits subtitles during reverse and forward scan of DVD video discs.
Press SLOW during playback. SLOW (_ Each time you press the SLOW I_button, the slow-motion speed changes. SLOW If you press the SLOW _11button during playback, you can view the picture in reverse slow-motion. (Only when using a DVD video disc.) • To resume normal playback Press PLAY. =# PLAY =# Each time you press the SLOW <1 button, the slow-motion speed changes. 1 Notes • The sound is muted during slow-motion playback.
a Desired Section i'_i;i!iiiiilCi_i_iiii%%_i_ _il i .............. i Normally, DVD video discs are divided into titles, and the fitles are sub-divided into chapters. DVD audio discs are divided into groups, and the groups are sub-divided into tracks. VIDEO CDs and audio CDs are divided into tracks. You can quickly locate any specific fitle, chapter, group, or track. DVD audio disc DVD video disc _ Title 2 Title 1 _ ____Chapter 1 ____- Chapter 2 Chapter I VIDEO CD/Audio Press _.
CLEAR A/V/ ®-,.@or@..@-,.
ii ..........iY MP3 disc compatibili_ with this player is limited as follows: • Playable discs: CD-ROM, CD-R (650MB / 74 min. only) CD-RW is not recommendable. • Sampling Frequency: 44.1 kHz only • Bit rate 32 kbps-320 kbps • CD physical format: Mode 1, Mode 2 XA Form 1 • File system: ISO9660 Level 1 • File names are limited to eight characters or less and must incorporate "MP3" extension. e.g."********.M P3" • File names cannot contain special characters such as "?t><+*}{'[@]:;\ /.," etc.
cessing a Specific Location Directly You can access a specific location by entering its corresponding (hours, minutes, seconds). elapsed time ii .............il 1 Press T several times. SEARCH YOUmay have to press further depending on the disc. Press the button repeatedly until the clock icon is highlighted. e.g, 2 Press the number buttons to enter the elapsed time. e,g. @-®-®.-®-® 3 Press PLAY or ENTER. PLAY Playback location.
You can play a specific title, chapter, group, track, or segment repeatedly. If you select the repeat mode during playback, the DVD player automatically starts repeat playback after finishing the current title, chapter, group or track. Press REPEAT. REPEAT The repeat mode menu appears. C) 12 Press REPEAT or • / • repeatedly to select the repeat playback mode. REPEAT (_ < The mode changes as follows (when using the REPEAT button): 3 Press PLAY.
in a Favorite Order You can combine your favorite titles, chapters, groups, or tracks and play them in the order you determine. You can program up to 30 selections into the memory. (Memory playback) il Insert stop. a disc and press MEMORY MEMORY during The following display appears.
in Random Order i ¸ i You can play titles, chapters, groups or tracks in random order. (Random playback) 2 • To resume normal playback Press CLEAR. Press RANDOM. RANDOM The random mode menu appears, CLEAR ;> 2 Press or playback • / • repeatedly select RANDOM the random mode. to RANDOM CD Notes • Some discs may not permit random playback operation. • You cannot use the random playback function in conjunction with the memory playback function.
a Picture : You can magnify areas within a picture. ZOOM-/ZOOM/ZOOM+ Zoom point Toshift: During ZOOM, normal, ZOOM+ slow ororstill playback, press ZOOM-. __) zoom_ C_) _ The DVD player enters the zoom playback mode, and a monitor scope and an icon appear. Press the • / • / • / • buttons. e.g. • To hide the monitor scope and the icon during zoom playback Press • / • / • / • to select "EXIT," and press ENTER. Select the zoom point and magnification level.
the Sound Enhancement (E.A.M. *) ' You can easily switch a preferred audio enhancement. *E.A.M.: Enhanced Audio Mode il ............il ii .......... il Press E.A.M.E.A.M.The sound enhancement menu • To exit the audio enhancement Press ENTER, selection appears. Alternatively leave the DVD player unattended for about 5 seconds after having made a selection. .<, g Notes 2 Press the E.A.M. or • enhancement. / • repeatedly to select sound E.A.M. _w,) i Norma Normal sound.
the Camera Angle if the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching. m2 --CLEAR ii .......... il 1 • Press ANGLE while playing a scene recorded with multiple angles. ANGLE (_ While playing a scene recorded with multiple angles, the angle icon (_) flashes in the DVD display, Press the ANGLE button while the angle icon is flashing, e.g. 2 Press ANGLE or • / • while the angle number is displayed on the TV screen.
/ Subtitles You can display subtitles on the TV screen and select a subtitle language from those included on the DVD video disc. _SUBTITLE • Press SUBTITLE during playback. SUBTITLE The current subtitle setting is @ displayed. To turn subtitles 1 Press SUBTITLE SUBTITLE on or off during playback. e.g, g_ < 2 Press < / • while the subtitle setting is displayed on the TV screen, to select "On" or "Off." The abbreviation of the language appears instead of the language name.
' a Language I iiiiii iiiiiii i_J_ You can select a preferred language and sound recordhlg system from those included on the disc. _1, > • PressAUDIO during playback. AUDIO The current audio setting is (_ displayed. 2 [} Selecting audio streams of DVD audio discs During playback, perform steps 1 and 2. At step 2, you can switch streams 1 and 2. e.g. Number of a stream selected e.g. Number and information of a stream currently played The abbreviation of the language appears of the language name.
• Output sound conversion table Multi channel sounds 2 channel stereo sounds BITSTREAM/PCM lack "Digital Output Output" 5.10H AUDIO Dolby Digital I aitstream aitstream Mult_ Pro video Linear disc DVD DTS audio Bitstream MPEG1, MPEG2 disc (LPCMt VIDEO CD Linear Audio PCM PCM PCM StereoMult_ 441 MP3 I kHzJ16 No decode bit BITSTREAM]PCM "Bit.
the Virtual Remote Control - V-REMOTEPressing one button allows you to control control. can display playback a graphics based as if you were doing on-screen it from remote control the actual remote that il ...........il ii .......... il • Icons and features During playback, press V-REMOTE. _/.REM01"_ The graphic remote control (Virtual Remote) appears. For the meaning of each icon, see right. See the pages in [_ Icon _[_* e.g.
' the Playback Function - QUICK- ii ...... Pressing one button can display a list of playback functions which are relevant to your current playback mode, You can check and modify them from the list, 2- i_:i:_i_ ii:;ii=!i::iiii:iii ii 1 During playback, press QUICK. Press _\(_ ENTER. and playback will resume according Theyour on-screen display disappears to selection. appears. The on-screen display (Thefollowing actual display will vary depending on the playback status.) e.
_cessing The Features- NAVI- NAVI menu access provides key playback an icon based function display from which you can easily or setting, ii il............il il ii .......... il • TO exit the NAVI menu Press Press NAVI. (_/ The NAV[ menu appears, NAVL d Alternatively press• / • to remove the highlight from an icon to the center position, and press ENTER. 12 Press • / • / _1 / • to select feature icon.
Navi menu selections STROBE VIEWER You can divide a desired scene into stop action frames for careful analysis. SETUP You can change the default settings to customize performance to your preference. _O PREVIEW You can display thumbnail views of the first scenes of titles or chapters and select a preferred one.
cessing 1 Features - NAVI - (continued) STROBE VIEWER You can divide a desired scene into stop action frames for careful analysis, PREVIEW After selecting this icon and pressing ENTER, the following on-screen display appears: After selecting this icon and pressing ENTER, the following on-screen display appears: e.g. e.g. Press • / • / • / • to select, Slow: Still pictures at shorter intervals. Normal: Still pictures at normal intervals. Fast: >>: : Still pictures at longer intervals.
CAPTURE ANGLE VIEWER YOUcan display all camera angles simultaneously and select a preferred one from them. You can sample a scene from a playback picture and transform it into a background picture. After selecting this icon and pressing ENTER, the following on-screen display appears: After selecting this icon and pressing ENTER, the following on-screen display appears: e.g. e.g. _ng_eV_wer When the scene contains 9 camera angles: 1 Pause playback at a scene you want to capture.
cessing Features - NAVI - (continued) PICTURE SETTING YOUcan fine tune picture quality and store up to 3 custom picture settings in the memory of the DVD player. After selecting this icon and pressing ENTER, the following on-screen display appears: 3 Press ENTER. The sub menu appears. 4 Press • / • to adjust the value, and press ENTER. e.g. e.g.
DISPLAY CLOSED CAPTION YOUcan display closed captions included on a DVD disc without connecting a closed caption decoder to your TV, You can view information about a disc and its operational status on the TV screen, After selecting this icon and pressing ENTER, the following on-screen display appears: After selecting this icon and pressing ENTER, the following on-screen display appears: e.g. e,g, Title : 1 Chapter : 23 Time : 1:23:45 At_Jio : £NG T FIN Subtle D 2CH : ENG 1 On Angle : 1/3 E,A,M.
stomizing the Function Settings You can change the default settings to customize preference. performance to your i ................ ii 1 Press SETUP during stop. SETUP The following O appears. on-screen display [3 Press • / • to select the setting you want to change, then press ENTER. Change selection tobythe • / • or other buttons, the by referring corresponding pages [_, then press ENTER. Press • to select a symbol for the setting<1/ you want to change. (See the next page.
Setting Details TV Shape To select a picture size according to the aspect ratio of your TV. 58 Progressive 4:3 Output To select the video output of pictures recorded in 4:3 format. (Only when connected to a PROGRESSIVE TV.) To select the system of output signal. (Only when connected to a PROGRESSIVE "iV.) 58 To select the resolution of still pictures. (Field/Frame) 58 To select a sound processing option according to performance of the connected equipment.
stomizing the Function Settings (continued) _re Select the video output of pictures recorded in 4:3 format. (Only when connected to a PROGRESSIVE TV.) 4:3 Letterbox: 4:3 Normal: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. Select when a standard 4:3 TV is connected, Displays pictures cropped to fill your TV screen. Either or both sides of the picture are cut off.
I "'° _log OulpUl Ka_aekeVe_a__ To select the output format of analog signal corresponding to your system connection. Far details of sound recording systems, see [_3"_. off Make this selection only when you use your audio equipment (e.g. receiver) connecting to the DVD player via the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack.
stomizing the Function Settings (continued) (Continued) C (Center) Speaker Off: When center speaker is not connected. On: When you connect center speaker. S (Surround) Speaker Off: When surround speakers are not connected. On: When you connect surround speakers. Subwoofer Off: When a sub woofer is not connected. Surround Channel Delay 0msec: When Df equals Ds. lmsec: When (B) is approx. 34 cm (13 inch) 2msec: When (B) is approx. 68 cm (27 inch) 3msec: When (B) is approx. 102 cm (40 inch)...
To select the output format of digital signal corresponding to your system connection. For details of sound recording systems, see [_4_. $ube_e_ Bitstream: PCM: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder. [_[_ The DVD player outputs digital audio information in the bitstream format when you play a DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or MPEG2 recording system. Select when connected .-.
stomizing the Function Settings (continued) 3) Press the • / • buttons to shift and select the second character by pressing the • / • buttons. English: French: Spanish: Others: To play sound tracks in English. To play sound tracks in French. To play eo_nd t_acke in Spanish. TO make a further choice. After pressing the ENTER button, follow steps 1) -4) below. 1) Obtain the abbreviation of the preferred language from the list [_i_. 2) Select the first character buttons.
_emele _r_alJe_, 0_, O_ Off: Operational modes (e.g. ° _', displayed. On: Operational modes (e.g. ° _', displayed on-screen. Blue: Gray: Capture: Jacket: " _") are not " _") are Blue background. Gray background. To use a picture you sampled and stored in the memory using the Capture feature [_ as a background. To use the jacket picture included on some discs as a background. If it is not included, a gray background will be substituted. Off: The screen saver is disengaged.
stomizing the Function Settings (continued) 3) Press the • / • buttons to select the parental lock level, then press the ENTER button. (Continued) 1) Press the number buttons to create a personal 4-digit security code, then press the ENTER button. If you make a mistake before pressing the ENTER button, press the CLEAR button and enter your 4-digit security code again. 2) Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list below.
Off: The beeper does not sound, On: The beeper sounds with each remote operation. _ _elunO__l he restm_ to pre._e[ I le_. i_ze Off: The DVD player continues after playback of a title/group is completed. On: The DVD player stops after playback of a title/ group is completed, To restore all settings to the factory set. 1) Press the • / • buttons to select "Yes," and press the ENTER button. Off: When playing a VIDEO CD without using the menu.
!;ili; ; ;_ _ _1! _!! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! h ¸h h h h h h h h h h h h h h h h h! ¸_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _! j!!! J!!! J!!! J!!! J!!! of Languages Abbreviation Language No alternate CHI (ZH) DUT (NL) ENG (EN) FRE (FR) GER (DE) ITA (IT) JPN (JA) KOR (KO) MAY (MS) SPA (ES) AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DZ EL EO ET EU FA FI FJ FO FY GA GD GL 66 language Chinese Dutch English French German Italian Japanese Korean Malay Spa
a TVwith the Remote Control You can operate the basic functions of selected TVs using the supplied remote control, il.........;_iii i _ Number buttons Preparation Follow the instruction of "To program the remote control" to set the brand code. Point the remote control at your TV, and use buttons as follows. TV power TVN(O_O VOL ÷ / CH t,/v • To program the remote control t While herding down ENTER, press the number buttons that correspond to yourTV's brand code referring to the list on the next page.
• Brand code table Brand name Brand code TOSHIBA BELL& HOWELL CARVER CITIZEN CURTIS MATHES 0001 0471 0201 0201 0471 0311 0201 0581 0041 0471 0941 0991 0201 0001 0481 0021 0381 0501 0501 0311 0001 0501 0471 0201 0411 0201 0201 0511 0201 0001 0511 0371 0841 0071 0301 0071 0501 0201 0931 0341 0371 0841 0631 0851 0331 EMERSON FISHER GE GOLDSTAR HALLMARK HITACHI INFINITY JBL JVC LXl MAGNAVOX MARANTZ MEMOREX MGA MITSUBISHI MTC NAD OPTONICA PANASONIC PHILCO PHILIPS PROTON PULSAR QUASAR RADIO SHACK 0071 0651
Calling Service Personnel Check the following guide for the possible cause of a problem before contacting Symptom Cause No power. • The power plug is disconnected. The DVD player turned off by itself. • The automatic power off function turned the unit off. No picture. • The TV is not set to receive DVD signal output. • The v}deocable is not connected securely. No sound. Correction pow. pl.g soo Oly,.
DVD player Power supply 120 V AC, 60 Hz Power consumption 16 W Mass 2.5 kg External dimensions 430 x 69 x 219 mm (W/H/D) Signal system Standard NTSC Laser Semiconductor laser, wavelength 650 nm / 780 nm Frequency range DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz 96 kHz sampling 4 Hz to 44 kHz 192 kHz sampling 4 Hz to 88 kHz Signal-to-noise ratio More than 112 dB Audio dynamic range More than 108 dB Harmonic distortion Less than 0.
LIMITED WARRANTY DVD PLAYER Toshiba America Consumer Products, Inc. ("TACP"), Toshiba Hawaii ("THI") and Toshiba Canada Limited ("TCL") make the following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from the original purchaser and to no other purchaser or transferee.
How to Obtain Warranty Service (1) Refer to the troubleshooting guide in your owner's manual. This check list may solve your problem. (2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days after you find a defective product or part. (3) Arrange for the delivery of the product to the TACP/THl/TCLAuthorized Service Station or TACP Return Center.
TOSHIBA Printed in China
