Manual
SignalFlow
Towalloutlet
(red)_
To ANALOG AUDIO OUT
To audio inputs of
the amplifier
(white)
9
IVl_EOpEOmVl0E0
OUT OUT OUT
1 ToY vide0_npu_
Audio system TV or monitor with
component video inputs
[] Switching the output signal (interlaced/progressive) using the remote control
You can temporarily switch the output signal for better picture quality.
Press PROGRESSIVE on the remote control during stop mode.
Press PROGRESSIVE again to turn off progressive mode.
If your TV does not support the progressive scan format, the picture will appear scrambled
or blank. To return to normal picture, press PROGRESSIVE button again to turn off
progressive mode.
Notes
• Refer to the owner's manual of the connected equipment as well.
Make the following setting.
On-screen display Select: Page
"Digital Output .... PCM" or _
"Bitstream"
Component
"Video Output" * P-Scan [_ [_
(Progressive)
Only for TV equipped with component video
input jacks which support the progressive scan.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD video player away
from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise,
high volume sound may damage your hearing as well as the speakers.
• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power on, the speakers may be damaged.
• Progressive can be on/off only when "Video Output" is set to Component or Progressive _.
• In component connections, the screen might become pinkish in color when the "Video Output" is set to S-VIDEO. This is not a defect of this unit _.
• When Progressive is on, only component video will be output.
• Analog audio out will not have sound if DTS playback is selected.
• When using component video cables, do not connect the S video cable.
ColorStream ®and ColorStream Pro® are registered trademarks of Toshiba America Consumer Products, LLC.
nnecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player
to optional audio equipment.
O
o
o
o
03
Dolby Digital _Manufaciumd under iicenseirom Dolby.................
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now Laboratories. "Dolby", "Pro Logic'and the
available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD double-D symbol are trademarks of Dolby
video discs with this dynamic realistic sound by connecting the DVD video player to a 6 channel amplifier Laboratories. Confidential unpublished
works. Copyright 1992-1997 Dolby
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic Laboratories. All rights reserved.
decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.t-channel ....................................................................................................................................................................................................................................................
Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. • Use DVD video discs encoded via
Amplifier equipped with a
Dolby Digital decoder
To
COAXIAL
type digital
audio input
75 _)coaxial cable
the Dolby Digital recording
system.
• Make the following setting.
On-screen display Select: Page
"PCM" or
"Digital Output" "Bitstream" [36_
Recording system 17['1 D
p2*17*3990SU,pmd
13
30/9/2005, 10:31 AM