Operation Manual

52
Parental control setting
Some discs are specified as not suitable for children.
Such discs can be limited not to playback with the unit.
1) Press C or D to select “Parental”, then press
ENTER. “Enter Password” screen will appear.
2) Press “0000” using Number buttons (0–9).
(Please note, this is pre-setting password of this
unit). Then press ENTER. The parental level list
will appear.
• Level Off: The parental control setting does not
function.
• Level 8: Virtually all DVD software can be
played back.
• Level 1: DVD software for adults cannot be
played back.
3) Press C or D to select from the level 1 to level 8.
The limitation will be more severe as the level
number is lower. Then press ENTER.
4) Press OPEN/CLOSE to activate Parental control
setting.
Notes:
• Depending on the discs, the unit cannot limit
playback.
• Some discs may not be encoded with specific
rating level information though its disc jacket says
“adult.” For those discs, the age restriction will not
work.
• The password is required every time when you
change the parental level.
• If you input a wrong number, press CLEAR.
Customizing the function settings
QSound
This DVD player is equipped with “QSound”. It can
produce the effect of being in a cinema or a concert hall.
Off: The QSound is disengaged.
On: The QSound operates.
Off: It plays back at the recording level on the
disc.
On: Loud sound such as explosion is toned
down slightly when played back. This is
suitable when it is connected to a stereo.
Notes:
• This function works only when the disc recorded with
Dolby Digital is played back.
• The level of Night Mode may differ depending on DVD
video disc.
Night Mode
Night Mode enables you to control the dynamic range so
as to achieve a suitable sound for your equipment.
Notes:
• The QSound setting can also be changed with AUDIO
on the remote control (see page 41).
• This function works only when the disc recorded with
Dolby Digital is played back.
• When this function works, the volume might change.
• When the voice is distorted, turn off QSound.
Parental : Off
Set Password
Output : Interlace
DivX(R) VOD
Menu : English
Subtitle : English
Audio : English
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
Night Mode : Off
QSound : Off
Digital Out : PCM
DRC : Off
QSound : On
Menu : English
Subtitle : English
Audio : English
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
Parental : Off
Password : Change
Output : RGB
DivX(R) VOD : Display
Setting details
Digital Out
You can select the digital output sound format
corresponding to your system connection.
PCM:
Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital
stereo amplifier.
Bitstream:
Disc audio bitstream data will be output.
Off:
There is no sound output from DIGITAL AUDIO
OUT jack.
Note:
Even if you select “Bitstream”, MPEG Audio will be
output in PCM format.
2K20101A [EN] P49-53 1/30/07, 6:18 PM52