Operation Manual

48
Folder-1
Folder-2
MP3-1
MP3-2
MP3-3
MP3-4
MP3-5
MP3-6
JPEG Preview
Edit Mode
Program View
Add To Program
In the file browser, press B/A/C/D to select
“Edit Mode”, then press ENTER.
When “Edit Mode” is in black
colour, you can mark the files
which you want to add into
Program list.
Press B/A/C/D to select the file you want to
add into the program list.
Press ENTER. Selected file was
marked.
Repeat this procedure to select
the other files.
Press B/A/C/D to select “Add To Program”.
Then press ENTER. All marked files are
added into the program list.
• When you finish storing the files
you want into the Program list,
select “Edit Mode” again and
press ENTER to release edit
mode.
Folder-1
Folder-2
MP3-1
MP3-2
MP3 3
Repeat :Off
Mode :Off
Edit Mode
Program playback (CD)
Press C/D to select “Program View”, then
press ENTER. Program View shows only the
programed files that you have added at step
2.
Browser View
In the Program View, press PLAY. The files
start to playback in programmed order that
were added by you.
To remove file from program list in stop mode
In the Edit Mode, switch to Program View.
Select the files you want to remove in stop mode,
then press ENTER. Select “Clear Program” and
press ENTER.
Marked file is removed from program list.
1
2
3
4
5
MP3-1
MP3-2
MP3-3
MP3-4
JPEG Preview
Edit Mode
Browser View
Clear Program
Program View
Repeat and program playback using file browser
Note:
The program function is cancelled when you eject the
disc or turn the power off.
2K20101A [EN] P41-48 07.1.29, 1:55 PM48