Operation Manual

26
VCR
Recording a TV Program
1
2
3
“VCR” indicator lights.
“VCR” indicator goes off.
“VCR” indicator lights.
You can record a program using the
TV receiver of the DVD/VCR and at the
same time watch another program on
the TV set using its receiver. As the
DVD/VCR automatically switches the
TV set the following points should be
observed:
Auto Rewind Feature
The DVD/VCR will automatically rewind
when the tape has ended (except during
OTR and TIMER REC). It will also eject
the cassette tape.
Press TV/VCR until “VCR” appears on the display. Select the
program on the DVD/VCR you want to record. This program can
be watched on the screen and recorded by the DVD/VCR.
While the VCR is recording, press TV/VCR until the “VCR”
indicator on the display goes off. The TV set now displays the
program of its built-in receiving module. Select the TV channel
you want to watch on the TV set. Although the TV set now shows
another program, the DVD/VCR will continue recording the
previously selected program.
Using TV/VCR you can switch the TV screen between the DVD/
VCR picture and the TV picture. If the “VCR” indicator is lit on the
display, you will watch the DVD/VCR picture. This will not affect
on the recording.
To Display VCR operation Status
Press CALL. The clock, the day of the week and more information
will be indicated.
To cancel the indicating: Press CALL until all indicators disappear.
REC
Deck-status
here: Stop
Time
Day of the week
Indication for
Hi-Fi-playback
or stereo-
reception
(displayed
only for
approx. 4
seconds.)
Program
number or
Scart input
(AV1,AV2 or
AV3)
Indication for the selected
playback sound (e.g.: L CH
= Left Channel) (displayed
only for approx. 4 seconds.)
Tape speed
Cassette inside the
unit
Real time counter
2K20101A [EN] P25-32 07.1.29, 1:53 PM26