Operation Manual
17
4
Setting the time and date manually
2
3
1
5
7
CLOCK SET
DAY SAT
31
MONTH
YEAR
TIME
3
2007
11:30
SELECT :
SET :
OK
: ENTER
EXIT
: MENU
AUTO TIME ON
8
VCR
Preparation:
• Turn ON the TV and set to the AV input mode.
•
Press VCR to select the VCR mode. (The VCR indicator will light.)
Example: Setting the clock to "11:30" March, 31 (SAT), 2007.
Press VCR MENU. The VCR menu screen will appear.
Press or to select SYS-
TEM SETUP, then press EN-
TER.
Press
or to select CLOCK
SET, then press ENTER.
Press
or repeatedly until
“31” appears. Then press
.
Set the month, year, hour and
minute as in step 4.
Then press ENTER.
• In case of an erroneous input,
press
to go back to previ-
ous step and enter again.
The clock will begin operation.
CLOCK SET
DAY WED
AUTO TIME ON
31
MONTH
YEAR
TIME
1
2007
0:00
SELECT :
SET :
OK
: ENTER
EXIT
: MENU
You must set the date and time
manually for timer recordings if
Auto setup process did not set
them correctly.
Notes:
• In case of a power failure, the clock will
continue to operate for another 30 min-
utes with quartz-controlled precision.
To indicate that the power failure has
lasted for an excessive period of time
"--:--" will appear on the display. In this
case, readjust time and date.
• The AUTO TIME function adjusts the
clock only if the error is within 5
minutes.
• The VCR automatically adjusts the
clock setting for Daylight Saving Time
once you set AUTO TIME to ON.
Press VCR MENU repeatedly until the TV picture appears on
the screen.
6
Press or to select AUTO TIME ON or OFF.
The VCR automatically corrects the clock setting every hour
once you set AUTO TIME to ON.
2K20101A [EN] P14-17 07.1.29, 1:52 PM17