Operation Manual
32
2
4
1
3
--:--
--:-------- --
--:--
--:-- --
------
--:--
--:-- --
------
--:--
--:-- --
------
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
--:--
--:-------- --
/ ENTER
SELECT :
EXIT : MENU
-
-
-
-
-
-
-
-
Timer recording
Timer recording can be programmed
on the TV-screen with the remote con-
trol. The built-in timer allows automatic
unattended recording of up to 8 pro-
grams within 1 month.
Note:
In the event of a power failure, the data of
the automatic recording will be main-
tained in the built-in memory for about 30
minutes. Also, the clock will continue to
run for this period of time. Thereafter the
data will be deleted. When the power
resumes, the time display will change to
“
--
:
--
” that the timer setting will have to
be set.
Preparation
•Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
• Load a video cassette with the erase prevention tab intact. Make
sure with CALL that the time and date are correct.(see page 30).
Example: Timer recording for channel 1, 13:00 to 14:30 with Tape
speed LP on timer program number 1.
Press VCR MENU. Press
or
to select TIMER REC SET.
Then press ENTER.
Each line stands for one pro-
gram of the 8 memories. Select
one line with
or . Then
press ENTER.
Set the desired date with or
or Number buttons (0-9).
Then press to accept it.
Set the Starting time (13:00),
ending time (14:30), channel
(1), Tape speed (LP) and VPS/
PDC (page 34) in the same way
as the step 3.
• In case of an erroneous
input, press
to go back to
previous step and enter
again.
2J50301A [EN] P29-37 3/22/06, 8:11 PM32