User Guide

25
Notes
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT
ja
ck of the DVD video player to the AC-3 RF input of
a
Dolby Digital Receiver. This input on your A/V Receiver
is
reserved for Laserdisc use only and is incompatible with
the
COAXIAL DIGITAL AUDIO OUT jack of the DVD
video
player.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of
the
DVD video player to the “DIGITAL (COAXIAL)”
input
of a Receiver or Processor.
• Refer to the owner’s manual of the connected
equipment as
well.
• When you connect the DVD video player to other
equipment, be
sure to turn off the power and unplug all of
the
equipment from the wall outlet before making any
connections.
• The output sound of the DVD video player has a
wide dynamic
range. Be sure to adjust the receiver’s
volume
to a moderate listening level. Otherwise, the
spea
kers may be damaged by a sudden high volume
sound.
• Turn off the amplifier before you connect or disconnect
the
DVD video player’s power cord. If you leave the
amplifier
power on, the speakers may be damaged.
• For connection to your TV, see “Connecting to a TV”
(see pages 21~23).
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment.
Warning
• When you are connecting (via the COAXIAL
DIGI
TAL AUDIO OUT jack) an AV decoder that does
no
t have Dolby Digital, Digital Theater Systems
(D
TS) or MPEG2 decoding function, be sure to set
“Digital
Output” to “PCM” from the on-screen displays
see page 32.
Otherwise, high volume sound may
damage
your hearing as well as the speakers.
• When playing DTS-encoded discs (DVD Video discs
and audio
CDs), excessive noise may be output
from
the analogue audio output jacks. To avoid
possi
ble damage to the audio system, you should
ta
ke proper precautions when the analogue audio
output
jacks of the DVD video player are connected
to
an amplification system. To enjoy DTS Digital
Surround™
playback, an external 5.1 channel DTS
Digital
Surround™ decoder system must be
connected
to the COAXIAL DIGITAL AUDIO OUT jack
of the
DVD video player.
Connections