User Guide

17
Disc playback
Playing a Disc
Press the ON/STANDBY button.
The DVD video player turns on.
Press OPEN/CLOSE.
The disc tray opens.
Place the disc on the disc tray.
With
the playback
side
down
• There are two different disc sizes. Place the
disc
in the correct guide on the disc tray. If
the
disc is out of the guide, it may damage
the
disc and cause the DVD video player to
malfunction.
• Do not place a disc which is unplayable in
this
DVD video player.
This section shows you the basics on how to play a disc.
SELECT
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the
input
connected to the DVD video player.
1
2
3
Basic playback
Press OPEN/CLOSE to close the disc tray.
If you insert a DVD video disc that contains a
top menu, a menu may appear. Use the /
/ / to select the title you want to view, then
press ENTER to start playback.
• You may need to press the TOP MENU or
MENU button to display disc menu
(depending on the actual DVD video disc.)
4
Notes
• If the disc tray is holding a disc you have already
pl
ayed, playback will begin from the location where you
last stopped
. For resuming playback, see page 19.
• Some video CD are recorded with PBC (Playback
Cont
rol), a menu with recorded contents may appear
on the
TV if you have turned the PBC On. You can
ma
ke your selection according to its PBC menu. Press
the PBC
button on the remote control to turn PBC On
or
Off anytime during Video CD playback. When
switching from
PBC Off to PBC On mode, playback
will
start from the beginning of the disc.
To start playback in the stop mode
Press PL
AY.
Playback starts.