User Guide

TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
1. Remove one M2.5x6 black flat head screw securing
the HDD guide assembly and lift out the HDD guide
assembly.
2. Remove three M2.5x6 black flat head screws securing
the select bay cover and lift out the select bay cover.
SYSTEM BOARD REMOVAL
3. Disconnect the following cables from the system board:
-Sound interface cable from PJ103
-SD interface cable from PJ150
-DC-IN jack harness from PJ803
4. Remove three M2.5x4 black flat head screws
securing the system board.
5. Lift out the system board.
SOUND BOARD REMOVAL
1. Disconnect the sound interface cable from PJ103
and the SD interface cable from PJ150 on the
SD/Sound board.
2. Remove one M2.5x4 black flat head screw
securing the SD/Sound board.
3. Remove the wireless LAN switch button.
4. Lift out the SD/Sound board.
1. Disconnect the power supply harness from PJ850
and PJ851 on the system board.
2. Remove one M2.5x4 black flat head screws securing
the power supply board.
3. Disconnect the power supply board from the system
board.
POWER SUPPLY BOARD REMOVAL
Satellite
TM
System
board
Power supply board
M2.5x4 black flat head screws
Power supply
harness
M2.5x4 black flat head screw
Sound
Interface
cable
SD/Sound board
PJ150
PJ103
Wireless
LAN switch
button
HDD guide
assy
M2.5x6 black flat head screws
Select bay
cover
M2.5x4 black flat head screws
DC-IN jack harness
PJ803
SD
interface
cable
Sound
interface
cable
TE2000
Download service manual and resetter printer at http://printer1.blogspot.com