User Guide

2. Disconnect the black and white coax from the
wireless LAN card.
3. Spread the Mini-PCI connector clips and pull the
Wireless LAN card out of the connector about
45 degree angle.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TOP COVER REMOVAL
1. Turn the computer upside down and remove the
following screws:
-9 M2.5x6 black screws
-1 M2.5x4 black flat head screw
-2 M2.5x20 and 1 M2.5x12 black screws
2. Turn the computer right side up with the rear facing
you.
3. Remove two M2.5x4 silver screws securing the top
cover.
4. Open the display panel.
M2.5x4 silver screws
Satellite
TM
WIRELESS LAN CARD REMOVAL
M2.5x6 silver screws
M2.5x20 black screws
M2.5x4
black flat
head
screw
M2.5x12
black
screws
5. Remove two mask seals and four rubber seals on
the display mask using a pair of fine-tipped tweezers.
6. Remove two M2.5x6 black screws and four M2x6
silver flat head screws securing the display mask.
7. There are 23 latches securing the display mask.
Carefully insert your fingers between the mask and the
LCD panel and pry open the latches starting from the
six top latches, to the five latches on each right
and left sides, ending with the bottom seven latches.
Mask seals
Rubber seals
TOP COVER REMOVAL
Black coax cable
White coax cable
Wireless
LAN card
Mini-PCI
connector
clips
TE2000
Download service manual and resetter printer at http://printer1.blogspot.com