User Guide

4 Replacement Procedures
Satellite/Satellite PRO T230D Maintenance Manual 4-vi
Figure 4.32 Removing the Thermal Module........................................................................4-46
Figure 4.33 Reapply Shinetsu 7762 grease on the thermal module and remove any release papers
...................................................................................................................... 4-47
Figure 4.34 Removing two screws from LCD Bezel........................................................... 4-48
Figure 4.35 Prying up the LCD Bezel ................................................................................. 4-49
Figure 4.36 Removing the LCD Bezel ................................................................................ 4-49
Figure 4.37 Removing the LCD Module from the LCD cover assembly............................ 4-51
Figure 4.38 Disconnect the cable from the camera module................................................. 4-52
Figure 4.39 Removing the LCD Hinges .............................................................................. 4-52
Figure 4.40 Removing the LVDS cable from the LCD panel ............................................. 4-53
Figure 4.41 Installing the LCD Hinge Assembly ................................................................ 4-54
Figure 4.42 Removing the Camera Module......................................................................... 4-55
Figure 4.43 Removing the antennas from the LCD cover assembly................................... 4-56
Figure 4.44 Peeling off the foil and removing the antennas................................................ 4-57