User Guide

User's Manual The Keyboard 5-5
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as
IM_420UK
Fn
+
F2
Battery save mode:
Pressing
Fn + F2
changes the battery save mode.
If you press
Fn + F2
in a Windows 95 environment, an icon panel is
displayed showing the setting. If you press
Fn + F2
in a Windows 98
environment, the Power Scheme menu is displayed. You can name and
save your own custom configurations. When you press these hotkeys, the
current setting will be displayed in a window. You can also change this
setting through the
Power Save Modes
feature of the Power Saver.
Fn
+
F3
Power up mode:
Pressing
Fn + F3
changes the power up mode. When
you press these hotkeys, the current setting will be displayed in a window.
If you use Windows 95, you can use the
System
window of the Power
Saver utility. In a Windows 98 environment, use the
When I press the
power button
item of the
System Power Mode
window in the Power Saver
utility.
F4
Fn
+
Alarm volume:
Press
Fn + F4
to adjust the alarm volume to off, low,
medium or high. The first time you press
Fn + F4
the volume is set to off.
Continue holding down
Fn
and press
F4
again to change the setting. A
beep sounds to let you know the current alarm volume. The volume at
power on depends on the latest setting.
Fn
F5
+
Display selection:
Pressing
Fn + F5
changes the active display device.
As indicated in the table below, the changes depend on the computer’s
display type, current setting and whether you have an external monitor
connected.
TSETUP Active display Change order
Auto-Selected Internal
External
Int.
→
Sim.
→
Ext.
Ext.
→
Int.
→
Sim.
Simultaneous Internal and external Sim.
→
Ext.
→
Int.