User Guide

9-16 Troubleshooting User's Manual
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as
IM_420UK
Memory expansion
Refer also to Chapter 8, Optional Devices, for information on installing
memory modules.
Problem Procedure
The following
message is displayed:
Please remove
the incompatible
memory module
Make sure the memory module installed in the
expansion slot is compatible with the computer. If
an incompatible module has been installed,
follow the steps below.
1.
Disconnect the AC adaptor and all peripheral
devices.
2.
Remove the battery.
3.
Remove the memory module.
4.
Replace the battery and/or connect the
AC adaptor.
5.
Turn on the power.
The computer does
not recognize the
memory module
There are two slots for memory modules. Make
sure one memory module is installed in slot A.
If a module is installed in slot B only, follow the
steps below.
1.
Turn off the power.
2.
Disconnect the AC adaptor and all peripheral
devices.
3.
Remove the battery.
4.
Remove the memory module from slot B and
install it in slot A.
5.
Replace the battery and/or connect the
AC adaptor.
6.
Turn on the power.
If problems persist, contact your dealer.