User’s Manual P100
Copyright © 2007 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. P100 Portable Personal Computer User’s Manual Second edition January 2007 Ownership and copyright of music, video, computer programs, databases, etc. are protected by the copyright laws.
Trademarks Intel, Centrino, Core and Celeron are trademarks or registered trademarks of Intel Corporation. Windows and Microsoft are registered trademarks and Windows Vista is a trademark of Microsoft Corporation. Photo CD is a trademark of Eastman Kodak. TruSurround XT, WOW XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT, WOW XT, TruBass, SRS 3D and FOCUS technologies are incorporated under license from SRS Labs, Inc. DVD MovieFactory is a trademark of Ulead Systems, Inc.
Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121.
Panasonic DVD Super Multi UJ-850BTJV-A and UJ-841BTJV-A ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Pioneer DVD Super Multi DVD-K16 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
TOSHIBA SAMSUNG STORAGE TECHNOLOGY DVD-ROM & CD-R/RW TS-L462C ■ The DVD-ROM&CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Panasonic DVD-ROM & CD-R/RW UJDA770 ■ The DVD-ROM&CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
Hitachi-LG Data Storage, Inc. DVD-ROM & CD-R/RW GCC-4244-ATAKKO ■ The DVD-ROM&CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
xii User’s Manual
Table of Contents Preface General Precautions Chapter 1 Introduction Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 Utilities and Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Options . . . . . . . . . . . . . . . .
Table of Contents Chapter 4 Operating Basics Using the Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1 Using the internal modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6 Wireless communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7 Using optical disc drives . . . . . . . . . . . . . . . .
Table of Contents Chapter 8 Optional Devices PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 SD/MMC/MS/MS Pro/xD Memory cards . . . . . . . . . . . . . . . . . . . . . . . 8-4 Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7 Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11 Additional AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents xvi User’s Manual
Preface Congratulations on your purchase of the P100 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells you how to set up and begin using your computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Preface Chapter 7, HW Setup, introduces you to the TOSHIBA Hardware Setup program. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn’t seem to be working properly. The Appendices provide technical information about your computer. The Glossary defines general computer terminology and includes a list of acronyms used in the text.
Preface Display ABC Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left. Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read.
Preface xx User’s Manual
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
Chapter 1 Introduction This chapter identifies the computer’s features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Introduction Software Microsoft® Windows Vista™ The following software preinstalled on your hard disk: ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Microsoft® Windows Vista™ Microsoft Internet Explorer TOSHIA Value Added Package TOSHIBA HW Setup TOSHIBA Supervisor Password TOSHIBA SD Memory Card Format TOSHIBA Assist TOSHIBA ConfigFree DVD Video Player TOSHIBA Acoustic Silencer Ulead MediaFactory® for TOSHIBA Online Manual Display Driver TouchPad Driver Sound Driver Miscellaneous drivers (depending on the model you purchased: Mo
Introduction Documentation Your computer’s documentation: ■ P100 Portable Personal Computer User’s Manual ■ P100 Quickstart ■ Microsoft® Windows Vista™ Quick Start Guide (provided with some models) ■ Instruction Manual for Safety & Comfort ■ Warranty information If any of the items are missing or damaged, contact your dealer immediately.
Introduction Memory Memory Module Slot DDRII SO-DIMM (533/667MHz specification compliant) modules can be installed in the two Memory Module Slots for a maximum of 4GB of system memory. Video RAM Depending on the model you purchased: UMA 128MB (maximum) for Internal Graphics. (maximum size is depending on system memory size) 128MB/256MB/512MB GDDR2 for nVIDIA® GeForce™ Go 7600 256MB/512MB GDDR3 for nVIDIA® GeForce™ Go 7900GS Power Battery Pack 6-cell Li-Ion smart battery pack with 10.
Introduction Display 17" High Brightness TFT screen with a resolution of 1440 horizontal x 900 vertical pixels or 17" High Brightness TFT screen with a resolution of 1680 horizontal x 1050 vertical pixels Disks User’s Manual Fixed hard disk Either of: 60.0 billion bytes (55.89GB) 80.0 billion bytes (74.52GB) 100.0 billion bytes (93.16GB) 120.0 billion bytes (111.78GB) 160.0 billion bytes (149.04GB) 200.0 billion bytes (186.26GB) Serial ATA hard disk drive 9.5mm/12.5mm height 2.
Introduction DVD Super Multi drive (Supporting Double Layer) Some models are equipped with a full- size DVD Super Multi Drive module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.
Introduction i.LINK (IEEE1394) This port enables high-speed data transfer directly from external devices such as digital video cameras. TV Out The 4-pin S-Video port is compatible with PAL or NTSC TV standard, supporting Macrovision 7.02 copy protection. DVI This 25-pin port allows you to connect a Digital Visual Interface monitor directly to the computer. This can include HD television displays, flat screen monitors, and other similar products.
Introduction Wireless LAN (depends on the model you purchased) Some computers in this series are equipped with a wireless LAN mini-card that is compatible with other LAN systems that support the following: 802.11a/b/g wireless LAN module/802.11b/g wireless LAN module. It has a Frequency Channel Selection (2.4 or 5 GHz) and allows roaming over multiple channels.
Introduction HDD Automatic Power Off *1 This feature automatically cuts off power to the hard disk drive when it is not accessed for a time specified. Power is restored when the hard disk is accessed. This can be specified in the Power Options. System Automatic Sleep Mode/ Hibernation *1 This feature automatically shuts down the system in Sleep Mode or Hibernation Mode when there is no input or hardware access for a time specified. This can be specified in the Power Options.
Introduction TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. 1-10 TOSHIBA Power Saver TOSHIBA Power Saver provides you with the features of more various power supply managements. TOSHIBA Button Support This utility controls the following computer button functions. The applications associated with each of the following button can be assigned by the user. ■ Buttons: Assign applications to the Internet, CD/DVD buttons.
Introduction Utilities and Applications This section describes preinstalled utilities and tells how to start them. For details on operations, refer to each utility’s online manual, help files or readme.txt files. TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides easy access to help and services. HW Setup This program lets you customize your hardware settings according to the way you work with your computer and the peripherals you use.
Introduction TOSHIBA DVD-RAM Utility TOSHIBA DVD-RAM Utility has a Physical Format function and Write-Protect function to DVD-RAM. This utility is contained in the TOSHIBA Disc Creator setup module. To run TOSHIBA DVD-RAM Utility, click , select All Programs, TOSHIBA, CD&DVD Applications, and then click DVD-RAM Utility. TOSHIBA ConfigFree ConfigFree is a suite of utilities that allow easy control of communication devices and network connections.
Introduction Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: Memory Modules Two memory modules can be installed in this computer. Use only DDRII-533MHz/667MHz compatible memory modules. See your TOSHIBA dealer for details. User’s Manual Battery Pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time.
Introduction 1-14 User’s Manual
Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
The Grand Tour Microphone Jack The standard 3.5 mm mini microphone jack enables connection of a three conductive type mini-jack for a monaural microphone. Headphone Jack The headphone jack lets you connect stereo headphones or other audio-output devices such as external speakers with power amplifier. Connecting headphones or other devices to this jack automatically disables the internal speakers. Line-In Jack The standard 3.5 mm mini line- jack enables connection of a three conductive type mini-jack.
The Grand Tour Optical Disc Drive The computer is configured with a full-size optical disc drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter. See the Drives section in this chapter for technical specifications on each drive and Chapter 4, Operating Basics, for information on using the drive and caring for discs. The Optical Disc Activity LED illuminates when the drive is in use.
The Grand Tour i .LINK (IEEE1394) Port Connect an external device, such as a digital video camera to this port for high-speed data transfer. PC Card Slot The PC Card slot can accommodate one Type II PC Card. You can install any industry standard PC Card such as a SCSI adapter, Ethernet adapter or flash memory card. Back side The following figure shows the computer’s back panel.
The Grand Tour Fan Vents The fan vents help to keep the CPU from overheating. LAN Jack This jack lets you connect to a LAN. The adapter has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX), or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). Two indicators built into the jack let you see the LAN status.
The Grand Tour 2-6 Battery Pack Release Latch Slide this latch to remove the battery pack. Will not work if the Battery Pack Lock is engaged. Battery Pack Lock Slide this lock to unlock the battery pack, allowing you to remove it by sliding the Battery Pack Release Latch. Battery Pack The battery pack powers the computer when the AC adapter is not connected. For detailed information on the battery pack, refer to Chapter 6, Power and Power-Up Modes.
The Grand Tour Front with the display open The following figure shows the front of the computer with the display open. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle.
The Grand Tour Hard Disk Drive LED The Hard Disk Drive LED indicates that the Hard Disk Drive is being accessed. Every time your computer runs a program, opens a file, or performs some other function in which it must access the Hard Disk Drive, this light goes on. Multiple Digital Media Card Slot Access LED The Multiple Digital Media Card Slot Access LED lights up when the Multiple Digital Media Card is accessed. Left and Right Speakers The audio speakers.
The Grand Tour Touch Pad A pointing device located in the center of the palm rest is used to control the on-screen pointer. Refer to the Using the Touch Pad section in Chapter 4, Operating Basics. Touch Pad Control Buttons Control buttons below the Touch Pad let you select menu items or manipulate text and graphics designated by the on-screen pointer. Keyboard Indicators Caps Lock User’s Manual Scroll Lock Num Lock Caps Lock The Caps Lock icon lights when you press the Caps Lock key.
The Grand Tour Optical Disc drive One of the following optical disc drives is installed in the computer: DVD-ROM & CD-R/RW drive or DVD Super Multi drive (either single layer or double layer support, depending on the configuration of your computer). An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a disc, an indicator on the drive glows.
The Grand Tour DVD-ROM&CD-R/RW drive The full-size DVD-ROM&CD-R/RW drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter. The read speed is slower at the center of a disc and faster at the other edge.
The Grand Tour AC adapter The AC adapter converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any country/region. To recharge the battery, simply connect the AC adapter to a power source and the computer. See Chapter 6, Power and Power-Up Modes, for details. The AC adapter Use of the wrong adapter could damage your computer.
Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
Getting Started 1. Connect the power cord to the AC adapter. Connecting the power cord to the AC adapter 2. Connect the AC adapter to the DC output plug to the DC IN input port on the back of the computer. Connecting the adapter to the computer 3. Plug the power cord into a live wall outlet. The Battery and DC IN indicators on the front of the computer should glow. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1.
Getting Started 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Starting up for the first time in this chapter. 1.
Getting Started Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Sleep Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode, no data is saved and the computer will boot to the operating system’s main screen. 1. If you have entered data, save it to the hard disk or to a diskette. 2. Make sure all disk activity has stopped, then remove the optical disc drive or floppy drive diskette.
Getting Started Sleep Mode precautions ■ Before entering Sleep Mode, be sure to save your data. ■ Do not remove/install memory or remove power components: ■ Do not remove/install the memory module. The computer or the module could be damaged. ■ Do not remove the Battery Pack. In any of the above cases, the Sleep Mode configuration will not be saved. Benefits of Sleep Mode The Sleep Mode feature provides the following benefits: ■ Restores the previous working environment more rapidly than does hibernation.
Getting Started Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down. ■ Memory circuits are exposed to static electricity or electrical noise. Hibernation mode The hibernation feature saves the contents of memory to the hard disk when the computer is turned off. The next time the computer is turned on, the previous state is restored. The hibernation feature does not save the status of peripheral devices. 1.
Getting Started Automatic Hibernation The computer will enter Hibernate mode automatically when you press the power button or close the lid. First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel. 2. Open System and Maintenance and open Power Options. 3. Select the Choose what the power buttons does. 4. Select Hibernate for the setting you want, then click Save changes.
Getting Started System Recovery Options A 1.5GB hidden partition is allocated on the hard drive for the System Recovery Options. The System Recovery Options feature will be unusable if this partition is deleted. The System Recovery Options feature is installed on the hard disk when shipped from the factory. The System Recovery Options menu includes some tools to repair startup problems, run diagnostics or restore the system.
Chapter 4 Operating Basics This chapter gives information on basic operations. It also provides tips on caring for your computer. Using the Touch Pad To use the Touch Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go. Two buttons below the Touch Pad are used like the buttons on a mouse pointer. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer.
Operating Basics Touch Pad Touch Pad control buttons Touch Pad and control buttons Using the internal modem This section describes how to make settings and connect the modem. Refer to the computer’s online help files for more information. Refer also to the online help files for your modem software. The internal modem does not support the voice functions described in the help files. All data and fax functions are supported. ■ In case of a lightning storm, unplug the modem cable from the telephone jack.
Operating Basics Region selection Telecommunication regulations vary from one country/region to another, so you will need to make sure the internal modem’s settings are correct for the country/region in which it will be used. 1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA > Networking. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Operating Basics Setting You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region The dialing properties dialog box will be displayed automatically after you select the region. Location list for region selection A submenu appears displaying location information for telephony.
Operating Basics Connecting To connect the internal modem cable, follow the steps below. ■ In case of a lightning storm, unplug the modem cable from the telephone jack. ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected.
Operating Basics LAN The computer is equipped with LAN circuits that support Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX), or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). This section describes how to connect/disconnect to and from a LAN. If you use Gigabit Ethernet LAN (1000megabits per second, 1000BASE-T), be sure to connect with CAT5e OR CAT6 cable.
Operating Basics Disconnecting the LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub. Wireless communications The computer’s wireless communication function supports both Wireless LAN and Bluetooth devices.
Operating Basics ■ Roaming over multiple channels ■ Card Power Management ■ Wired Equivalent Privacy (WEP) data encryption. Wake-up on LAN does not function on a wireless LAN Wireless LAN Disclaimer: The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations.
Operating Basics Security Two advanced security mechanisms ensure a high level of security: ■ Authentication prevents access to critical data and makes it impossible to falsify the origin of a message. ■ Encryption prevents eavesdropping and maintains link privacy.
Operating Basics Wireless communication LED The LED indicates the status of the wireless communication functions. LED status Indication LED off Wireless communication switch is set to off. LED glows Wireless communication switch is on. Using optical disc drives The illustrations in this section might differ slightly from your drive, but operation is the same for all optical disc drives. The full-size drive provides high-performance execution of disc-based programs. You can run either 12 cm (4.
Operating Basics b. Pressing the eject button will not open the drawer when the computer’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button. Manual release with the eject hole 3. Grasp the drawer gently and pull until it is fully open.
Operating Basics 4. Lay the disc, label side up, in the drawer. Inserting a disc Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base. 6. Push the center of the drawer to close it. Press gently until it locks in place. If the disc is not seated properly when the drawer is closed, it might be damaged.
Operating Basics Removing compact discs To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
Operating Basics Buttons The Internet button and the CD/DVD button can be assigned to other functions and applications with Button Support Utility. 1. Move the mouse cursor to reach the top of desktop screen. The black cards and the white cards appears. Click “Button support” white card. 2. Double click the Button Support icon on the card. 3. On the TOSHIBA Button Support dialog box, change the function or application for the button to the desired one.
Operating Basics Writing CDs on a DVD-ROM&CD-R/RW drive You can use the DVD-ROM&CD-R/RW drive to write data to CD-R/RW discs. Important message Before you write or rewrite to CD-R/RW disc, read and follow all setup and operating instructions in this section. If you fail to do so, the DVD-ROM&CD-R/RW drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage.
Operating Basics TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used. ■ Be sure to connect the universal AC adapter when you write or rewrite. ■ Be sure to close all other software programs except the writing software.
Operating Basics ■ Set the computer on a level surface and avoid places subject to vibration, such as airplanes, trains, or cars. Do not use an unstable surface, such as a stand. ■ Keep mobile phones and other wireless communication devices away from the computer. Writing CDs/DVDs on a DVD Super Multi drive supporting double layer disc recording You can use the DVD Super Multi drive to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs.
Operating Basics Before writing or rewriting Please observe the following points when you write or rewrite data. ■ Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. 4-18 CD-R: TAIYOYUDEN CO., LTD. MITSUBISHI KAGAKU MEDIA CO. LTD RICOH Co., Ltd. MITSUI CHEMICAL, Inc.
Operating Basics ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it. ■ The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is affected by the quality of the disc and the way it is used. ■ There are two types of DVD-R: authoring and general use discs. Do not use authoring discs. Only general use discs can be written to by a computer drive. ■ Only 1 layer of DVD-R DL media is supported.
Operating Basics ■ Do not write while virus check software is running. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background. ■ Do not use hard disk utilities, including those intended to enhance Hard Disk Drive access speed. They may cause unstable operation and data damage. ■ Write from the computer’s Hard Disk Drive to the disc. Do not try to write from shared devices such as a LAN server or any other network device.
Operating Basics TOSHIBA Disc Creator Note the following limitations when you use TOSHIBA Disc Creator: ■ DVD-Video cannot be created using TOSHIBA Disc Creator. ■ DVD-Audio cannot be created using TOSHIBA Disc Creator. ■ You cannot use the TOSHIBA Disc Creator “Audio CD” function to record music to the DVD-R/-RW or DVD+R/+RW media. ■ Do not use the “Disc Backup” function of TOSHIBA Disc Creator to copy ■ DVD-Video and DVD-ROM with copyright protection.
Operating Basics Data Verification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD. 1. Display the setting dialog box by one of the following two steps: ■ Click the setting button ( ) for writing on the main toolbar in the Data CD/DVD mode. ■ In the Settings menu, select Settings for Each Mode, then Data CD/DVD. 2. Mark the Verify written data check box. 3. Select File Open or Full Compare mode. 4. Click the OK button.
Operating Basics How to learn more about Ulead DVD MovieFactory Please refer to the Help and Manual files for additional Ulead DVD MovieFactory information. Important information for use Note the following limitations when you write Video DVD: 1. Editing digital video ■ Log in with Administrator rights to use DVD MovieFactory. ■ Make sure that your computer is running on AC power when using DVD MovieFactory. ■ Operate the computer at Full Power. Do not use power-saving features.
Operating Basics ■ DVD-R/+R/+RW disc cannot be written in VR format. ■ Not support to output VCD and SVCD format. 3. About Straight to Disc ■ Not support to record on DVD-R/+R disc ■ Not support to record DVD+VR format by HDV ■ HDV support to burn DVD-Video only ■ DVD-VR format not support to add Menu 4. About recorded DVDs ■ Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/+R/-RW/-RAM discs.
Operating Basics Diskettes 1. Store your diskettes in the container they came in to protect them and keep them clean. If a diskette is dirty, do not use cleaning fluid. Clean it with a soft damp cloth. 2. Do not slide back the diskette’s protective metal covering or touch the diskette’s magnetic surface. Fingerprints may prevent the diskette drive from reading data from the diskette. 3. Data may be lost if the diskette is twisted; bent; or exposed to direct sunlight, extreme heat or cold. 4.
Operating Basics If an external display will not be connected next time you use your computer, you should cancel any extended desktop or clone display settings before shutting down your computer. Clone display settings are those where more than one device has been selected and is simultaneously applicable. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer.
Chapter 5 The Keyboard The computer’s keyboard layout is that of a 101/102-key enhanced keyboard. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are four types of keys: typewriter keys, function keys, soft keys and cursor control keys.
The Keyboard F1 ... F12 function keys The function keys, not to be confused with Fn, are the 12 keys at the top of your keyboard. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. See the section, Soft keys: Fn key combinations, in this chapter. The function executed by individual keys depends on the software you are using.
The Keyboard Fn + F9 Touch Pad Enables or disables the Touch Pad function. Fn + Space Zoom Changes the display resolution. Fn + 1 TOSHIBA Zooming Utility (reduce) Reduces the icon size on the desktop or the font size within one of the supported application windows. TOSHIBA Zooming Utility (enlarge) Increases the icon size on the desktop or the font size within one of the supported application windows. Fn + 2 Before using Fn+1 and Fn+2, you must install the TOSHIBA Zooming Utility.
The Keyboard Desktop-style Keyboard Your computer comes with a “desktop-style” keyboard. This means it is full-sized and features a full set of numeric function keys (also known as calculator keys) on the right-hand side. Unlike other notebooks computers with smaller keyboards, there is no “Numeric Mode” or any numeric keyboard overlay. Desktop-style Keyboard Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.
Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Power on AC adapter not connected Power off (no operation) Battery capacity • Operates is above low • LED: Battery off battery trigger DC IN off point Battery capacity • Operates is below low • Alarm sounds (depending battery trigger on the Low Battery Alarm point item of CMOS SETUP menu & Power Options setting) • LED: Battery flashes amber DC IN off Battery capacity Computer goes into exhausted Hibernation or shuts down (depending on the Power Options setting) No battery install
Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adapter connected: Blue Indicates the AC adapter is connected and supplying proper power to the computer. No light Indicates the AC adapter is not connected. Power indicator Check the Power indicator to determine the power status with the AC adapter connected: Blue The power button will shinning blue while power is being supplied to the computer and the computer is turned on.
Power and Power-Up Modes Real Time Clock battery The Real Time Clock (RTC) battery provides power for the internal real time clock and calendar. It also maintains the system configuration. If the RTC battery becomes completely discharged, the system loses this data and the real time clock and calendar stop working. The following message appears when you turn on the power: ERROR 0271:Check date and time settings. WARNING 0251:System CMOS checksum bad - Default configuration used.
Power and Power-Up Modes Danger 1. Never try to dispose of the battery pack by burning or expose it to a heating device such as a microwave oven. The battery pack could explode and cause bodily injury. 2. Never try to disassemble, repair or otherwise tamper with a battery pack. The battery pack will overheat and ignite. Leakage of caustic alkaline solution or other electrolytic substances will cause fire or injury, possibly resulting in death or serious injury. 3.
Power and Power-Up Modes 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack. Improper installation could generate smoke or fire, or cause the battery pack to rupture. 4. Keep the battery pack out or reach of infants and children. It can cause injury. Caution 1. Never continue to use a battery pack after its recharging capacity has become impaired, or after the display of a warning message indicating that the battery pack’s power is exhausted.
Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low, the Battery indicator flashes amber indicating that only a few minutes of battery power remain. If you continue to use the computer while the Battery indicator flashes, the computer enables Hibernation mode (so you don’t lose data) and automatically turns off. You must recharge a battery pack when it becomes discharged.
Power and Power-Up Modes Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extremely hot or cold. To make sure the battery charges to its full capacity, charge the battery at room temperature of 10° to 30°C (50° to 86°F). ■ The battery is nearly completely discharged. Leave the AC adapter connected for a few minutes and the battery should begin charging.
Power and Power-Up Modes Maximizing battery operating time A battery’s usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ How you configure the computer (for example, whether you enable battery power saving options). The computer provides a battery save mode to conserve battery power.
Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. If the Battery indicator flashes amber shortly after the battery has been fully recharged, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source. This section explains how to remove and install the battery pack.
Power and Power-Up Modes Installing the battery pack To install a battery pack, follow the steps below. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer’s power off. 2. Disconnect all cables connected to the computer. 3.
Power and Power-Up Modes TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Password Utility are different from the Windows® login password. User Password To start the utility, point to or click the following items: Launch TOSHIBA Assist SECURE User Password ■ Registered Click to register a password of up to 8 characters. After a password is set, you will be prompted to enter it when you start the computer.
Power and Power-Up Modes Starting the computer by password If you registered a password, start the computer by entering the password manually. The password is necessary only if the computer was shut down in boot mode, not in Hibernation or Sleep Mode. To enter a password manually, follow these steps: 1. Turn on the power. The following message will appear: Enter Password [xxxxxxxx] 2. Enter the Password. 3. Press Enter. If you enter the password incorrectly three consecutive times, the computer shuts down.
Power and Power-Up Modes System automatic Sleep Mode/Hibernation This feature automatically turns off the system in Sleep Mode or Hibernation mode if the computer is not used for a set duration. Refer to Special features, in Chapter 1, Introduction for an explanation of how to set the duration.
Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, USB and LAN. Accessing HW Setup To run HW Setup, click TOSHIBA HW Setup. , All Programs, TOSHIBA, Utilities, and select HW Setup Window The HW Setup window contains the following tabs: General, Password, Display, Boot Priority, Keyboard, LAN and USB.
HW Setup General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.
HW Setup Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep Mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in Sleep Mode. Enabled Enables the Wake-up on Keyboard. Disabled Disables the Wake-up on Keyboard (Default). USB USB KB/Mouse/FDD Legacy Emulation Use this option to enable or disable Legacy USB support.
HW Setup 7-4 User’s Manual
Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility.
Optional Devices PC Card The computer is equipped with a PC Card expansion slot that can accommodate one 5 mm Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC Cards, including PC Card 16’s multifunction card and CardBus PC Cards. CardBus supports the new standard of 32-bit PC cards. The bus provides superior performance for the greater demands of multimedia data transmission.
Optional Devices Removing a PC card 1. 2. 3. 4. 5. Click the Safely Remove Hardware icon on the Task Bar. Click the PC Card you want to remove. Press the eject button of the PC Card to extend it. Press the extended eject button to pop the card out slightly. Grasp the PC Card and remove it.
Optional Devices SD/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory.
Optional Devices Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Be sure the memory card is oriented properly before you insert it. If Windows® fails to read the card, remove it then reinsert it. ■ Two kinds of cards will not work at the same time. Insert only one card when using Multiple Digital media card Slot. ■ Memory Stick Duo/ Memory Stick Pro Duo/ Mini-SD card is not supported.
Optional Devices Removing a memory cards To remove a memory card, follow the steps below. 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Stop a memory card device 3. Press the memory card once to extend it. 4. Grasp the extended memory card, and remove it. Removing a memory card ■ Make sure the memory card indicator is out before you remove the card or turn off the computer’s power.
Optional Devices Memory card care Set the write-protect switch to the lock position, if you do not want to record data. 1. Do not write to a memory card if the battery power is low. Low power could affect writing accuracy. 2. Do not remove a memory card while read/write is in progress. 3. The memory card is designed so that it can be inserted only one way. Do not try to force the card into the slot. 4. Do not leave a memory card partially inserted in the slot.
Optional Devices Installing a memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Follow these steps to install a memory module: 1. Set the computer to boot mode and turn off the power. Do not try to install a memory module under the following conditions. You can damage the computer and the module. a. The computer is turned on. b. The computer was shut down in Sleep mode. 2.
Optional Devices 6. Fit the module’s connectors into the computer’s connectors at about a slanted angle and press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. 2 1 Installing a module 8. Seat the cover and secure it with the screws. 9.
Optional Devices Removing a memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. To remove the memory module, make sure the computer is in boot mode then: 1. Be sure the power is off and all cables are disconnected from the computer. Do not try to remove a memory module with the computer turned on. You can damage the computer and the module. 2.
Optional Devices Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. See Chapter 6, Power and Power-Up Modes. Additional AC adapter If you frequently carry the computer to different sites such as your home and office, having an AC adapter at each location reduces the weight and bulk of your load.
Optional Devices i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ optical disc drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply. Precautions ■ Make a back-up of your data before transferring it to the computer. There is a possibility that the original data will be damaged.
Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer.
Optional Devices 8-14 User’s Manual
Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists. Further action may result in data loss or damage.
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. This includes your printer and any other external device you are using. ■ Before you attach an external device, turn the computer off. When you turn the computer back on it recognizes the new device.
Troubleshooting Record your observations so you can describe them to your dealer. Software The problems may be caused by your software. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. These documents usually include a problem solving section or a summary of error messages.
Troubleshooting System start-up When the computer does not start properly, check the following items: ■ Self Test ■ Power Sources ■ Power-on Password Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: In Touch with Tomorrow TOSHIBA This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system. Depending on how the Boot Priority is set in the computer’s BIOS.
Troubleshooting AC power If you have trouble turning on the computer with the AC adapter connected, check the DC IN indicator. Refer to Chapter 6, Power and Power-Up Modes, for more information. Problem Procedure AC adapter doesn’t power the computer (DC IN indicator does not glow blue). Check the connections. Make sure the cord is firmly connected to the computer and a power outlet. Check the condition of the cord and terminals. If the cord is frayed or damaged, replace it.
Troubleshooting Problem Procedure Battery doesn’t power Check the power consumption settings in the the computer as long as Power Options Properties. Consider using a power saving mode. expected. Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Output to screen is garbled. Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key.
Troubleshooting Hard disk drive Problem Procedure Computer does not boot Insert a system diskette and reboot. from hard drive. There may be a problem with your operating system files. Refer to your OS documentation. Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter. Contact your dealer if the problems continue.
Troubleshooting 9-8 Problem Procedure Some discs run correctly, but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software’s needs. Check the disc’s documentation. Check the type of disc you are using.
Troubleshooting DVD Super Multi drive For more information, refer to Chapter 4, Operating Basics. User’s Manual Problem Procedure You cannot access a disc in the drive Make sure the drive’s drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the disc is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the disc. Make sure there is no obstruction. Remove any foreign object.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing. ■ Do not jar the computer during writing. ■ Do not connect/ disconnect external devices or install/remove internal cards during writing.
Troubleshooting Memory Card Refer also to Chapter 8, Optional Devices. Problem Procedure Memory card error occurs Reseat the memory card to make sure it is firmly connected. Check the card’s documentation. If problems persist, contact your dealer. Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure.Check Windows Device Manager.
Troubleshooting Problem Procedure Double-tapping does not work Try changing the double-click speed setting in the mouse control utility. 1. To access this utility, click , Control Panel, Hardware and Sound, then Mouse icon. 2. Wihtin the Mouse Properties window, click the Buttons tab. 3. Set the double-click speed as required and click OK. The mouse pointer moves too fast or too slow Try changing the speed setting in the mouse control utility. 1.
Troubleshooting Problem Procedure The mouse pointer moves too fast or too slow Try changing the speed setting in the mouse control utility. The mouse pointer moves erratically The mouse might be dirty. Refer to your mouse documentations for instructions on cleaning. If problems persist, contact your dealer. 1. To access this utility, click , Control Panel, Hardware and Sound, then Mouse icon. 2. Within the Mouse Properties window, click the Pointer Options tab. 3.
Troubleshooting Sleep Mode/Hibernation Problem Procedure The system will not enter Sleep Mode/ Hibernation Is Windows® Media Player open? The system might not enter Sleep Mode/Hibernation, if Windows® Media Player is either playing a selection or finished playing a selection. Close Windows® Media Player before you select Sleep Mode/Hibernation. If problems persist, contact your dealer.
Troubleshooting Modem Problem Procedure Communication software can’t initialize the modem Make sure the computer’s internal modem settings are correct. Refer to Phone and Modem Options Properties in the Control Panel. You can hear a dial tone If the call is going through a PBX machine, make but can’t make a call sure the communication application’s tone dial detection feature is disabled.
Troubleshooting Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Wireless LAN Make sure the computer’s wireless communication switch is set to on. Use the ConfigFree program that comes pre-installed in your computer to see LAN status. If problems persist, consult your LAN administrator.
Troubleshooting Problem Procedure Display error occurs Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. Monitor goes into panning mode Check your monitor specification. It might not support selected resolution and refresh rate. The resolution on monitor might go into panning mode when wide screen resolution is selected. Refer to Appendix B, Display Modes. i.LINK (IEEE1394) Problem Procedure i.
Troubleshooting 9-18 User’s Manual
Appendix A Specifications This appendix summarizes the computer’s technical specifications. Dimensions 394mm x 275mm x 35.9/41.9mm Weight 3.20kg/7.05lbs - 3.60kg/7.93lbs * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected.
Specifications Built-in Modem Network control unit (NCU) Type of NCU AA Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications Communication System Data: Fax: Communication Protocol Data: ITU-T-Rec (Former CCITT) Bell Fax: ITU-T-Rec (Former CCITT) A-2 Full duplex Half duplex V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90/ V.92(only for USA and Canada) 103/212A V.17/V.29/V.
Appendix B Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen. If that occurs, adjust the resolution of display, lowering it until the screen is displayed properly. You could also disable Windows Aero™ to help correct this situation.
Display Modes Display Resolution Color Depth (bpp) Refresh Rate (Hz) 1680 x 1050* 16 bpp 60 32 bpp 60 16 bpp 60, 75 32 bpp 60, 75 16 bpp 60 32 bpp 60 1920 x 1440 2048 x 1536 * Depends on the model you purchased. Some modes are not supported at LCD+CRT simultaneous mode and LCD+CRT Multi Monitor mode. DVI Monitor Port (Depending on the model you purchased.
Display Modes Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer’s LCD and on an external TV or CRT monitor. Follow the steps below. For the Intel Chipset 1. Click >Control Panel > Appearance and personalization > Personalization. 2. Choose Display Setting to open the Display Properties dialog box. 3. Click the Settings tab.
Display Modes 4. Click the Advanced button and choose Intel® Graphics Media Accelerator Driver for Mobile. 5. Click the Graphic Properties button and choose Television. 6. Adjusting the TV settings.
Display Modes For NVIDIA Chipset 1. Click > Control Panel > Appearance and personalization > Personalization. 2. Choose Display Setting to open the Display Properties dialog box. 3. Click the Settings tab.
Display Modes 4. Click the Advanced button and choose GeForce Go 7300 tab, and then expand the side menu. 5. Select TV from the side menu. 6. Adjust the monitor settings as you see fit.
Appendix C Wireless LAN Card Specifications User’s Manual Form Factor Mini PCI Type III or PCI Express MiniCard Compatibility ■ IEEE 802.11 Standard for Wireless LANS ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance. Network Operating System ■ Microsoft Windows® Networking Media Access Protocol ■ CSMA/CA (Collision Avoidance) with Acknowledgment (ACK) Data Rate ■ Theoretical maximum speed: 54Mbps (IEEE802.
Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
Wireless LAN Wireless IEEE 802.11 Channels Sets (Revision B and G) Frequency Range Channel ID 2400-2483.5 MHz 1 2412 2 2417 3 2422 4 2427 5 2432 6 2437 7 2442 8 2447 9 2452 10 2457*1 11 2462 12 2467*2 13 2472*2 *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/ regions that in which these channels can be used.
Wireless LAN Wireless IEEE 802.
Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region’s power standards) Certification agencies U.S.
AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U. S. A.
Appendix E Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual. Clicking on *XX will display the related description. Non-applicable Icons Certain computer chassis are designed to accommodate all possible configurations for an entire product series.
Legal Footnotes ■ use of computer at temperatures outside the range of 5°C to 30°C (41°F to 86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your computer documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details). CPU performance may also vary from specifications due to design configuration. Under some conditions, your computer product may automatically shutdown.
Legal Footnotes Battery Life Battery life may vary considerably depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Legal Footnotes Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. [54Mbps is the theoretical maximum speed under the IEEE802.11 (a/b/g) standard.] The actual transmission speed will be lower than the theoretical maximum speed.
Appendix F If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office. Make a note of your computer’s machine type, model number, and serial number, and put it in a safe place.
If your computer is stolen To register the theft online, please follow these procedures: ■ Visit www.toshiba-europe.com on the Internet. In the product area, choose Computer Systems. ■ In the Computer Systems page, open the Support & Downloads menu and choose the Stolen Units Database option. Your entries are used to track your computer at our service points. TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr.
Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary ROM: read only memory RTC: real time clock SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array XGA: extended graphics array A adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
Glossary C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time. The computer has two cache levels. Level one is incorporated into the processor and level two resides in external memory.
Glossary controller: Built-in hardware and software that controls the functions of a specific internal or peripheral device (e.g. keyboard controller). CPU: Central Processing Unit. The portion of the computer that interprets and executes instructions. CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen.
Glossary F fast infrared: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 megabits per second. floppy disk drive (FDD): An electromechanical device that reads and writes to floppy disks. floppy disk: A removable disk that stores magnetically encoded data. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use.
Glossary input: The data or instructions you provide to a computer, communication device or other peripheral device from the keyboard or external or internal storage devices. The data sent (or output) by the sending computer is input for the receiving computer. interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another. 2) To physically connect one system or device to another to exchange information.
Glossary modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See also CRT. MP3: An audio compression standard that enables high-quality transmission and real-time playback of sound files.
Glossary R Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to. restart: Resetting a computer without turning it off (also called “warm boot” or “soft reset”). See also boot. RJ11: A modular telephone jack. RJ45: A modular LAN jack. ROM: Read Only Memory: A nonvolatile memory chip manufactured to contain information that controls the computer’s basic operation. You cannot access or change information stored in ROM.
Glossary V VGA: Video Graphics Array is an industry standard video adaptor that lets you run any popular software. W warm start: Restarting or resetting a computer without turning it off. write protection: A method for protecting a floppy disk from accidental erasure.
Glossary Glossary-10 User’s Manual
Index A AC adapter, 1-4 additional, 1-13 connecting, 3-1 ASCII characters, 5-4 B Battery charging, 6-7 extending battery life, 6-9 indicator, 6-2 location, 2-5 Monitoring capacity, 6-8 real time clock, 1-4, 6-4 safety precautions, 6-4 save mode, 1-9 types, 6-3 Battery Pack, 1-4 Battery pack additional, 8-11 replacing, 6-10 C CD-RW/DVD-ROM drive, 1-5 using, 4-10 writing, 4-15 Cleaning the computer, 4-26 D Display, 1-5 automatic power off, 1-8 brightness decreases, 5-2 brightness increases, 5-2 opening, 3-
Index K Keyboard, 5-1 Desktop-style, 5-4 F1 ...
Index Soft keys emulating keys on enhanced keyboard, 5-2 Sonic RecordNow!, 1-11 Sound System, 1-7 Headphone & S/PDIF Jack, 1-7 microphone jack, 1-7 mute hot keys, 5-2 T TOSHIBA ConfigFree, 1-12 TOSHIBA Theft Registration, F-2 Touch Pad, 1-4 location, 2-7 using, 4-1 User’s Manual U USB, 1-6 V Video RAM, 1-4 W Wireless communication switch, 4-9 indicator, 4-10 Wireless LAN, 1-8 using, 4-7 Index-3
Index Index-4 User’s Manual
