User’s Guide If you need assistance: Technical support is available online at Toshiba’s Web site at support.toshiba.com. At this Web site, you will find answers for many commonly asked technical questions plus many downloadable software drivers, BIOS updates, and other downloads. For more information, see “If Something Goes Wrong” on page 104 in this guide.
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. For the state of California only.
Protection of Stored Data For your important data, please make periodic back-up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM.
FCC Notice “Declaration of Conformity Information” This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
Bluetooth® Wireless Technology Interoperability NOTE This section is only applicable if your system has a Bluetooth® module. Bluetooth® modules are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ ❖ Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Bluetooth® Wireless Technology and Your Health The products with Bluetooth® wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is much less than the electromagnetic energy emitted by wireless devices such as mobile phones.
Wireless Interoperability Wireless LAN products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖ The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n/ ac), as defined and approved by the Institute of Electrical and Electronics Engineers. ❖ The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi Alliance.
Wireless LAN and Your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers.
Canada – Industry Canada (IC) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Veuillez noter que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.
The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive Information The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive is intended to protect the quality of the environment and human health through the responsible use of natural resources and the adoption of waste management strategies that focus on recycling and reuse.
Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ Belgique: Deutschland: France: Italia: Nederland: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT.
Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community 5150-5250 Countries MHz Austria Belgium, France, Switzerland/ Liechtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK Iceland, Spain O: allowed 5250-5350 MHz 5470-5725 MHz Channels: 36, 40, 44, 48 Channels: 52, 56, 60, 64 Indoor Only Indoor Only Channels: 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 O O x O Indoor/Outdoor
The Access Point’s radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.
2. Indication The indication shown below appears on this equipment. (2) (3) (1) 2.4DSOF4 (4) 1 2 2.4: This equipment uses a frequency of 2.4 GHz. DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. 3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. The indication shown below appears on this equipment.
Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan. Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved.
Trademarks Satellite, Satellite Pro, Satellite Click, and eco Utility are either registered trademarks or trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license.
Device Recycling Information As part of a commitment to people and the future, Toshiba promotes the efficient use of resources by working to achieve our zero-wasteto-landfill goal at all our production sites. In addition to our existing waste reduction and recycling policies, Toshiba is strongly committed to reducing electronic waste.
Contents Chapter 1: Introduction...........................................24 This guide ............................................................ 25 Safety icons ......................................................... 26 Other icons used............................................ 26 Your device’s features and specifications ..... 27 Documentation .................................................... 27 Service options .................................................... 27 Chapter 2: Getting Started.
Contents Recovering the Internal Storage Drive ................. 35 Creating recovery media................................ 36 Restoring from recovery media...................... 38 Refresh your PC (with user’s data) ................ 40 Reset your PC ................................................ 42 Installing drivers and applications.................. 45 Using the touch pad ............................................ 46 Adjusting touch pad settings .........................
Contents 21 Starting an app using Search ........................ 62 Saving your work ................................................. 63 Backing up your work .......................................... 63 Toshiba’s online resources .................................. 64 Chapter 4: Mobile Computing ................................65 Toshiba’s energy-saver design............................ 65 Running the device on battery power.................. 65 Battery Notice ..........................................
Contents Using external speakers or headphones ....... 86 Using the Web Cameras...................................... 87 Using the Memory card reader ............................ 87 Inserting memory media ................................ 88 Removing memory media .............................. 88 Chapter 6: Utilities.................................................. 90 eco Utility® .......................................................... 91 Password Utility ...........................................
Contents 23 Error-checking ............................................. 116 Sound system problems .................................... 118 Printer problems ................................................ 118 Wireless networking problems........................... 119 Develop good computing habits........................ 121 Data and system configuration backup in the Windows® operating system ............ 122 If you need further assistance............................ 127 Contacting Toshiba..............
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba device, your work and entertainment can accompany you wherever you go. NOTE 24 This device is compatible with European Union Directive 2011/65/EU, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of certain chemicals including, but not limited to, lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE.
Introduction This guide NOTE 25 Certain Microsoft® software product(s) included with this device may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES.
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Introduction Documentation 27 Your device’s features and specifications Certain device chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the device chassis, unless you have selected all those features. This information applies to all the features and icons described in this guide.
Chapter 1 Getting Started This chapter provides tips for using your device effectively, summarizes how to connect components, and explains what to do the first time you use your device. Please read the safety instruction information on the Quick Start document (that shipped with your device) carefully and make sure you fully understand the instructions before you attempt to use your device in order to avoid potential hazards that could cause bodily injury, property damage, or damage the device.
Getting Started Connecting to a power source 29 To use external power or to charge the battery you must attach the AC adaptor. See “Connecting to a power source” on page 29. NOTE Please handle your device carefully to avoid scratching or damaging the surface. Connecting to a power source Your device requires power to operate. Use the power cord/cable and AC adaptor to connect the device to a live electrical outlet, or to charge the device’s battery.
Getting Started Connecting to a power source To connect AC power to the device: 1 Connect the power cord/cable to the AC adaptor. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. _ + 2 NOTE 3 Plug the AC adaptor cord into the DC-IN located on the back of the keyboard dock. To locate your DC-IN port, please refer to your Quick Start document.
Getting Started Charging the main battery 31 Charging the main battery NOTE The device battery is not accessible by the user. Before using the battery to power the device, you must charge the battery. To charge the battery, leave the device plugged into an AC power source with the device turned off until the battery light glows white. After that, the battery will be completely charged and ready to power the device.
Getting Started Registering your device with Toshiba Setting up your software When you turn on the device for the first time, do not turn off the power again until the operating system has loaded completely. NOTE The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices. The first time you turn on your device, the setup guides you through steps to set up your software. Follow the on-screen instructions.
Getting Started To Shut down your device 33 To Shut down your device 1 Press the Windows® ( screen. ) key to display the Start Pressing the power button before shutting down the Windows® operating system could cause you to lose your work. 2 Click or touch the Power ( corner of the screen. ) icon at the upper-right Shut down option (Sample Image) Shut down NOTE 3 To perform a Hybrid shut down, (instead of performing a Shut down), click or touch the Shut down option but do NOT hold the Shift key.
Getting Started To place your device in Sleep mode 3 Highlight Restart, and then click or touch the Restart option. The device closes all open applications, and restarts the operating system. To place your device in Sleep mode 1 Press the Windows® ( screen. ) key to display the Start If you power down using the Sleep command and the battery discharges fully, your unsaved information will be lost. Be sure to save your work first. 2 Click or touch the Power ( corner of the screen.
Getting Started Adding memory 35 Adding memory Your computer comes with enough memory to run most of today’s popular applications. Toshiba will not be responsible for any product damage, data loss, service or part replacement made necessary by improper installation of a memory module. Recovering the Internal Storage Drive NOTE To purchase an optional external writable optical disc drive, visit the Toshiba Web site at accessories.toshiba.com.
Getting Started Recovering the Internal Storage Drive storage drive from your recovery media. It is strongly recommended that you create recovery media before using your system for the first time. See “Creating recovery media” on page 36 and “Restoring from recovery media” on page 38. NOTE ❖ During the recovery process your device must be connected to an external power source via the AC adaptor.
Getting Started Recovering the Internal Storage Drive 37 When you create recovery media, the system will prompt you to insert several blank DVDs or connect one or more USB flash drives of a certain minimum capacity to your device. The amount of space required for storing the recovery files varies by device model. Follow the procedure below to determine how much space you will need for storing your system’s recovery files.
Getting Started Recovering the Internal Storage Drive 3 Check the “Information” area of the dialog box to determine the number of DVDs you will need and/or the minimum amount of storage space required for copying your system’s recovery files to USB flash drive(s). 4 Do one of the following: ❖ If you are copying files to DVD, insert a blank DVD into the optional external writable optical disc drive.
Getting Started Recovering the Internal Storage Drive NOTE 39 During the recovery process your device must be connected to an external power source via the AC adaptor. If you have created recovery media for your system, you can restore your system from such media, if necessary. For example, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery media.
Getting Started Recovering the Internal Storage Drive 6 Follow the on-screen instructions to complete the recovery process. When the process is complete, a message displays indicating that the drive has been recovered. 7 Click or touch Finish to restart the device. Refresh your PC (with user’s data) Using “Refresh your PC” recovers your Windows® installation to an earlier state while attempting to keep your data and apps you installed from the Windows® Store.
Getting Started Recovering the Internal Storage Drive 3 41 Click or touch Change PC Settings. The PC settings window appears. (Sample Image) PC settings screen 4 Click or touch Update and recovery. 5 Click or touch Recovery. 6 Select Refresh your PC without affecting your files, and click or touch Get Started. The “Refresh your PC” screen appears. (Sample Image) Refresh your PC screen Toshiba does not guarantee successful data back up.
Getting Started Recovering the Internal Storage Drive 7 Click or touch the Next button to begin. The “Ready to refresh your PC” screen appears. (Sample Image) Ready to refresh your PC screen You will be prompted to refresh your system. 8 Click or touch the Refresh button. 9 Your system will restart. The “Refreshing your PC” window appears. When the process is complete your system will reboot your Windows® operating system.
Getting Started Recovering the Internal Storage Drive 3 43 Click or touch Change PC Settings. The PC settings window appears. (Sample Image) PC settings screen 4 Click or touch Update and recovery. 5 Click or touch Recovery. 6 Select Remove everything and reinstall Windows, and click or touch Get Started. The “Reset your PC” screen appears.
Getting Started Recovering the Internal Storage Drive 7 Click or touch the Next button. The “Do you want to fully clean your drive?” screen appears. (Sample Image) Do you want to fully clean your drive screen 8 Select one of the following options: ❖ Just remove my files ❖ Fully clean the drive The “Ready to reset your PC” screen appears. (Sample Image) Ready to reset your PC screen 9 Click or touch the Reset button. The “Resetting your PC” window appears.
Getting Started Recovering the Internal Storage Drive NOTE 45 Selecting the “Fully clean the drive” option may take several hours. Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your device. NOTE You must have an Internet connection to reinstall applications.
Getting Started Using the touch pad Using the touch pad NOTE Some of the touch pad operations described in this section are only supported in certain applications, and only on certain models. NOTE The touch pad driver is pre-installed on your device. If this driver is removed, the touch pad and touch pad buttons will not work. You will need to reinstall the touch pad driver using the TOSHIBA Application Installer. For more information, see “TOSHIBA Application Installer” on page 103.
Getting Started Using the touch pad 47 Refer to the table below for specific instructions on performing each operation. NOTE The pointer is the icon (usually an arrow) that moves on the screen when you slide your finger across the touch pad or move a mouse connected to your device. To: Do the following: Move the onscreen pointer Slide your finger across the touch pad in the direction you want to move the pointer.
Getting Started Using the touch pad To: Do the following: Right-click an item 1 Move the pointer to the item you want to right-click. 2 Press and release the secondary control button. This feature varies by program. Check your program documentation for specific instructions on right-clicking. Scroll vertically Slide two fingers along the right edge of the touch pad in the direction you want to scroll. Repeat to scroll a longer distance.
Getting Started Using the touch pad 49 Adjusting touch pad settings While you are typing, the on-screen pointer may seem to move or jump around “by itself” to random locations on the screen. The on-screen pointer may also seem to automatically select text, click buttons, and activate other user interface elements. For help with these problems, try one or more of the following: ❖ Try adjusting your typing technique to avoid accidental contact with the touch pad.
Getting Started Connecting an external device Connecting an external device NOTE Depending on your system, some models may include USB 3.0 port(s). To distinguish these ports, please look for the blue inset within the USB 3.0 port (if available). You can easily attach an external device to your device. To do this: 1 Read the directions that came with the external device to see if you first need to install new software.
Getting Started Using external display devices 51 Connecting an HDMI™-compatible television or display device To connect an HDMI™-compatible television or display device: ❖ Connect one end of the cable (not included with your device) to the Micro HDMI™ Out port on the back of the keyboard dock, and then connect the other end of the cable to your television or display device. Refer to the manual that came with the television or display device for more information.
Getting Started Using external display devices ❖ Extend ❖ Second screen only (Sample Image) Display options window NOTE The ( ) + P keys navigate through the options without activating a selection. Press ENTER to activate a selection. NOTE You may also use F4, and then press ENTER to activate a selection.
Getting Started Customizing your device’s settings 4 Select Second screen ( 53 ). (Sample Image) Display options window 5 Select the desired display setting. Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.
Getting Started Caring for your device Caring for your device This section gives tips on cleaning and moving your device. For information about taking care of your device’s battery, see “Taking care of your battery” on page 76. NOTE Please handle your device carefully to avoid scratching or damaging the surface. Cleaning the device Keep liquids, including cleaning fluid, out of the device’s keyboard, speaker, and other openings. Never spray cleaner directly onto the device and/or display.
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the device’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your device to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Learning the Basics Computing tips ❖ Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy. For more information, see “Data and system configuration backup in the Windows® operating system” on page 122.
Learning the Basics Attaching and Detaching the keyboard 57 Attaching and Detaching the keyboard You can attach or detach the device from the keyboard dock. Detaching the keyboard allows you to use your device in Tablet mode. While attached, you can use your device as you would any laptop computer (Laptop mode). (Sample Image) Attaching/detaching the keyboard To Detach the tablet from the keyboard Close all applications and save all unsaved files before detaching the tablet from the keyboard.
Learning the Basics Attaching and Detaching the keyboard To Attach the tablet to the keyboard 1 Align the guide on the keyboard to the Windows® button on the tablet. Laptop mode (Sample Image) Attaching the keyboard 2 Gently press the tablet straight down into the bracket until it clicks in place. Screen orientation NOTE When you rotate the device from portrait to landscape (or vice versa), the screen orientation automatically changes according to the rotation angle.
Learning the Basics Using the keyboard 59 Using the keyboard Your device’s keyboard dock contains character keys, control keys, function keys, and special Windows® keys. (Sample Illustration) Keyboard Function keys The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard. (Sample Illustration) Function keys F1 through F12 are called function keys because they execute programmed functions when pressed.
Learning the Basics Backlit keyboard dock ❖ Application key—Has a similar function as the secondary mouse button Backlit keyboard dock (Available on certain models.) Your keyboard may have a backlight illumination feature. If the keyboard backlight setting is set to Auto, the backlight turns on when you type on the keyboard and turns off after a certain interval when you stop typing. You can modify the keyboard backlight setting to Always ON, Always OFF, or Auto.
Learning the Basics Touch screen 61 Drag—Touch and hold an item for a moment and then, without lifting your finger, move the item until you reach the target position. For example, drag items on any app screen to reposition them. Swipe or slide—To swipe or slide, quickly move your finger across the surface of the screen without pausing. For example, swipe your finger to the left from the right edge of the screen to display the Windows® charms. Double-tap—Tap quickly twice to zoom in.
Learning the Basics Mouse properties Mouse properties NOTE These mouse properties only apply to the touch pad and touch pad buttons. Mouse properties allow you to change your pointing device or mouse settings. To access Mouse properties: 1 Double-click or touch the Toshiba Pointing Device ( ) icon in the notification area. The Mouse screen appears. 2 Adjust the settings as desired, and then click or touch OK.
Learning the Basics Saving your work 63 (Sample Image) Searching for apps The Apps screen appears with the available system apps to choose from, or you can enter your search in the search field. Continue to swipe Up to reveal more apps. NOTE Swipe Down through the pages or press the Windows® ( ) button on the side of the device to return to the Start screen.
Learning the Basics Toshiba’s online resources HINT: Backing up all the files on your internal storage drive may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a highcapacity file recovery system, such as an external hard drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Chapter 3 Mobile Computing This chapter covers all aspects of using your device while traveling. Toshiba’s energy-saver design Your device enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba.
Mobile Computing Running the device on battery power Battery Notice Battery life rating is for comparison purposes only, and does not indicate the battery life that will be obtained by any individual user. Actual battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components.
Mobile Computing Charging batteries 67 The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information. It maintains this information for up to a month while the device is turned off. TECHNICAL NOTE: Depending on your system, the RTC battery may only charge while the device is turned on.
Mobile Computing Charging batteries TECHNICAL NOTE: The recharging of the tablet’s battery may not occur when your device is using all of the power provided by the AC adaptor to run applications, features, and devices. Your device's Power Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.
Mobile Computing Monitoring battery power NOTE 69 Depending on your system, the RTC battery may only charge while the device is turned on. To recharge the RTC battery, plug the device into a live electrical outlet and leave the device powered on for 24 hours. NOTE It is seldom necessary to charge the RTC battery because it charges while the device is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working.
Mobile Computing Monitoring battery power ❖ Flashes amber when the tablet’s battery charge is low and it is time to recharge the main battery or plug in the AC adaptor NOTE The DC-IN charging indicator light* glows orange if either battery is not fully charged when connected to the AC adaptor. NOTE If the DC-IN charging indicator light* flashes amber during charging, either a battery is malfunctioning, or it is not receiving correct input from the AC power supply.
Mobile Computing Monitoring battery power 71 Determining remaining battery power NOTE Wait a few moments after turning on the device before trying to monitor the remaining battery power. The device needs this time to check the battery’s remaining capacity and perform its calculations. Move the pointer over the power icon in the notification area, see “Finding your way around the desktop” on page 81 for more information on the notification area.
Mobile Computing Monitoring battery power Setting battery notifications You can set two notifications. Each notification can be set to alert you when a specified percentage of remaining battery power has been reached. You can also set the device to enter Sleep mode or Hibernation mode or to completely shut down when the notification goes off. To change the default notification settings: 1 While on the desktop, click or touch the Battery ( icon in the notification area.
Mobile Computing Monitoring battery power 73 (Sample Image) Advanced settings tab of Power Options screen 6 Configure the alarm settings to suit your needs.
Mobile Computing Monitoring battery power Microsoft® has combined these options into preset Power Plans. Using one of these power plans lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs. The following sections describe how to choose a Power Plan and discuss each power-saving option. Power Plans You can choose a predefined Power Plan or select your own combination of power options.
Mobile Computing Using the eco power plan 5 75 Click or touch Change plan settings to choose the plan you want to edit. This screen allows you to change basic settings. 6 Click or touch Change advanced power settings to access settings for battery notification levels, internal storage drive power save time, etc. You can click or touch the plus signs to expand each item and to see what settings are available for each item. 7 Click or touch OK to save the plan changes you have performed.
Mobile Computing Taking care of your battery If the device is leaking or its case is cracked, put on protective gloves to handle it. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
Mobile Computing Disposing of your device 77 Disposing of your device Never attempt to dispose of a computer by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven). Heat can cause a computer to explode and/or release caustic liquid, both which may possibly cause serious injury. Discard this device in accordance with applicable laws and regulations. Disposal of this product may be regulated due to environmental considerations.
Mobile Computing Traveling tips NOTE Before using your device aboard an aircraft, make sure the Wireless antenna is OFF (Airplane mode is ON) if your device has wireless LAN capability. NOTE To enable or disable wireless communication, use the F12 key. For more information see “TOSHIBA Function Keys” on page 129.
Chapter 4 Exploring Your Device’s Features In this chapter, you will explore some of the special features of your device. Exploring the Start screen The Start screen is the launching pad for everything you can do in the Windows® operating system, providing new and easy ways to access everything from your favorite apps and Web sites to your contacts and other important information.
Exploring Your Device’s Features Exploring the Start screen For detailed information on the new functionality, refer to the Windows® Help and Support. Search icon Power icon Apps page icon App tiles (Sample Image) Windows® Start screen Charms Use the Windows® charms to start apps, find documents, set up system components, and perform most other computing tasks.
Exploring Your Device’s Features Exploring the desktop Tiles Tiles can be accessed and launched from the Start screen. Typical Start screen tiles are the Desktop tile and Mail tile, as well as tiles representing all other applications downloaded to your system. Exploring the desktop You can use its features to start applications, find documents, set up system components, and perform most other computing tasks.
Exploring Your Device’s Features Exploring the desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking or touching the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area. You may see various icons displayed on your system desktop, for example: Recycle Bin—Holds files you have deleted.
Exploring Your Device’s Features Windows® Store 83 Notification area The notification area displays icons of tasks or programs that run continuously in the background and displays notifications. To learn more about each task, position the pointer over the icon for a few moments and a short description of the task appears. Typical tasks in the notification area are Current time, Power usage mode, network connectivity status, and speaker volume.
Exploring Your Device’s Features Setting up for communications Setting up for communications To connect to the Internet you need: ❖ A browser or communications program ❖ An Internet Service Provider (ISP) or online service if you plan to use the Internet ❖ A way to connect to the ISP (for example Wi-Fi®/broadband connection, etc.) Connect to the Internet NOTE Wireless connectivity and some features may require you to purchase additional software, external hardware or services.
Exploring Your Device’s Features Exploring audio features 85 Connecting your device to a network You can connect your device to a network to increase its capabilities and functionality. Accessing a network For specific information about connecting to the network, consult your network administrator. Many hotels, airports, and offices offer Wi-Fi® access.
Exploring Your Device’s Features Exploring audio features 5 When you have finished recording, click or touch the Stop Recording button. The Save As dialog box appears. 6 To save the file, type a file name, and then click or touch Save. Using external speakers or headphones NOTE To locate your headphone/microphone jack, please refer to your Quick Start document. Your device is equipped with a full stereo sound system with internal speakers.
Exploring Your Device’s Features Using the Web Cameras 87 Using the Web Cameras Your device comes with two built-in Web Cameras. One is located on the front and one on the back of the display. With these Web cameras you can do the following: ❖ Take pictures and record videos with your device ❖ Chat with others and have them see you while using instant messaging (IM) programs ❖ Have video conference calls NOTE To email, instant message or video conference, you must be connected to the Internet.
Exploring Your Device’s Features Using the Memory card reader NOTE Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the dragand-drop feature of the Windows® operating system. Inserting memory media NOTE To locate your Memory card reader or microSD™ Card slot, please refer to your Quick Start document. The following instructions apply to all types of supported media devices. 1 Turn the media so that the contacts (metal areas) are face down.
Exploring Your Device’s Features Using the Memory card reader 3 89 Highlight, and then click or touch the item you would like to eject. If the system is unable to prepare the media for safe removal, a message will tell you to try again later. If the media can be removed now, the system displays Safe to Remove Hardware. If the device has a spring-loaded adapter slot, see step 4; otherwise, skip to step 5. 4 Gently press the card inward to release it. The card pops out slightly.
Chapter 5 Utilities Your device includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter. NOTE 90 The utilities described in this chapter, and the icons shown in the sample images are applicable only if the related utility is available on your system.
Utilities eco Utility® 91 eco Utility® The eco Utility® monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To access the eco Utility®: 1 From the Start screen begin typing eco Utility. 2 Click or touch eco Utility. The eco Utility® window appears. (Sample Image) eco Utility® window 3 To activate the eco power plan, select eco Mode on the left side. 4 Click or touch the eco Mode button. 5 Click or touch Close.
Utilities Password Utility Password Utility Setting a password lets you walk away from your device while providing additional protection for your files. When you set a password, you must enter the password before you can work on your device again. TOSHIBA supports different types of passwords on your device: ❖ A supervisor password—Prohibits unauthorized users from accessing certain functions such as System Settings. This is useful if more than one person uses the device.
Utilities Password Utility 93 To set a supervisor password: 1 To access Supervisor Password from the Start screen begin typing Password Utility. 2 Click or touch Password Utility. (Sample Image) Supervisor Password tab 3 Click or touch Supervisor Password. 4 Click or touch Set. 5 Enter your password, and then enter it again to verify. 6 Click or touch Set. NOTE 7 NOTE Under User Policy, this option may or may not ask for password verification.
Utilities Password Utility Deleting a supervisor password To delete a supervisor password: 1 To access Supervisor Password from the Start screen begin typing Password Utility. 2 Click or touch Password Utility. A pop-up screen appears asking for a password. 3 Enter your password, and then click or touch Verify. 4 Click or touch Supervisor Password. 5 Click or touch Delete. An authority verification pop-up screen appears. 6 Click or touch Delete.
Utilities Password Utility 95 To register a password for the power-on password functions: 1 To access User Password from the Start screen begin typing Password Utility. 2 Click or touch Password Utility. 3 Click or touch User Password. (Sample Image) User Password tab 4 Click or touch Set. 5 Enter your password, and then enter it again to verify. 6 Click or touch Set. 7 Click or touch OK to save your password as a text file. NOTE Password Utility will suggest “memo.
Utilities Password Utility Deleting a user password To cancel the power-on password function: 1 To access User Password from the Start screen begin typing Password Utility. 2 Click or touch Password Utility. A pop-up screen appears asking for a password. 3 Enter your password, and then click or touch Verify. 4 Click or touch Delete. An authority verification pop-up screen appears. 5 Click or touch Delete. 6 Enter the password, and then click or touch Verify. 7 Click or touch OK to exit.
Utilities System Settings 97 System Settings System Settings is the TOSHIBA configuration management tool available through the Windows® operating system. To access it: 1 To access System Settings from the Start screen begin typing System Settings. 2 Click or touch System Settings. The System Settings screen appears.
Utilities Sleep Utilities ❖ ❖ ❖ ❖ Boot Options—Allows you to change the sequence in which your device searches the drives for the operating system ❖ Boot Priority—Allows you to configure boot priority settings. ❖ Panel open/Power on—Allows you to turn on the device when opening the display panel/tablet while the device is turned off.
Utilities Sleep Utilities NOTE 99 ❖ When “USB Sleep and Charge function” is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports. However, some external devices cannot be charged solely by supplying USB bus power (DC 5V).
Utilities Sleep Utilities Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. Enabling/Disabling USB Sleep and Charge This utility can be used to enable or disable the USB Sleep and Charge function. To enable this function, select Enable. To disable this function, toggle the Enable button to the Disabled position.
Utilities Function Key 101 Function Key NOTE The Function options are disabled by default. TOSHIBA Function Key enables you to activate functions by pressing specific keys either singly or in combination with Fn. Some functions show the toast notification at the edge of the screen. These settings turn notifications ON/OFF. 1 To access Function Key from the Start screen begin typing Function Key. 2 Click or touch Function Key. The Function Key screen appears.
Utilities Recovery Media Creator Recovery Media Creator The Recovery Media Creator utility enables you to create recovery media that can be used to return your system to its out-of-box state, if necessary. For detailed information on using the utility to create recovery media, see “Creating recovery media” on page 36.
Utilities TOSHIBA Application Installer 103 TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your device. NOTE You must have an Internet connection to reinstall applications. To reinstall drivers and applications: 1 To access TOSHIBA Application Installer from the Start screen begin typing Application Installer. 2 Click or touch TOSHIBA Application Installer.
Chapter 6 If Something Goes Wrong Some problems you may encounter when using your device are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
If Something Goes Wrong Problems that are easy to fix 105 If you are working in a program that suddenly freezes, chances are the program has stopped responding. You can exit the program without shutting down the operating system or closing other programs. To close a program that has stopped responding: 1 Press Ctrl, Alt, and Del simultaneously (once), and then click or touch Task Manager. The Task Manager window appears.
If Something Goes Wrong Problems when you turn on the device Problems when you turn on the device These problems may occur when you turn on the power. The device will not start. Make sure you attached the AC adaptor and power cord/cable properly. Press and hold the power button for at least 10 seconds. If you are using the AC adaptor, check that the wall outlet is working by plugging in another device, such as a lamp. Verify that the device is on by looking at the Power button.
If Something Goes Wrong The Windows® operating system is not working 107 The DC-IN charging indicator light is blinking. If the DC-IN charging indicator light is blinking, try the following steps: 1 Connect the AC adaptor to a different power outlet, preferably in a different room. If the device starts normally, there may be a problem with the AC outlet itself, or the voltage level available from it. 2 Verify that the AC adaptor is the correct unit for your device model.
If Something Goes Wrong The Windows® operating system is not working Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem. Using Startup options to fix problems If the operating system fails to start properly, you may need to troubleshoot the Operating System and/or its settings.
If Something Goes Wrong The Windows® operating system is not working 109 Reset your device ❖ All of your personal files and apps are removed ❖ Your device settings are changed back to their defaults For more information, see “Reset your PC” on page 42. Advanced options Choosing this option presents you with another set of options: System Restore ❖ System Restore allows you to use a Restore point to return the device to a state at which it was performing properly.
If Something Goes Wrong The Windows® operating system is not working ❖ Enable boot logging Creates a file that lists all the drivers that are installed during startup ❖ Enable Safe Mode Starts Windows® with a minimal set of drivers and services. If the device starts and runs in Safe Mode, you will know the Operating System is most likely working properly and that you should look to third-party applications or drivers for the source of your problem.
If Something Goes Wrong Fixing a problem with Device Manager 111 The Windows® operating system can help you If the operating system has started properly but you still have a problem using your device, the online Help can assist you in troubleshooting the problem. Getting to the online Help will differ depending on which interface you are in: ❖ NOTE ❖ Start screen—Type Help and Support As soon as you begin typing, the search feature automatically begins.
If Something Goes Wrong Power and the batteries 3 From the list of device(s), double-click or touch the device type. 4 To view the device(s) installed, double-click or touch the device. The operating system displays the device Properties dialog box, which provides an array of tabs. They may include: ❖ The General tab, which provides basic information about the device. ❖ The Resources tab, which lists resources assigned to the device. This tab does not appear if the device is not using resources.
If Something Goes Wrong Power and the batteries 113 The AC adaptor and power cord/cable work correctly, but the battery will not charge. The tablet’s battery does not charge while the device is consuming full power. Try turning off the device. The battery may be too hot or too cold to charge properly. If you think this is the probable cause, let the battery reach room temperature and try again. If the battery has completely discharged, it will not begin charging immediately.
If Something Goes Wrong Keyboard problems Keyboard problems You have connected an external keyboard and the operating system displays one or more keyboard error messages. You may need to update your keyboard driver. Refer to the documentation that came with the keyboard or to the keyboard manufacturer's Web site. The keyboard you connected may be defective or incompatible with the device. Try using a different make of keyboard.
If Something Goes Wrong Display problems 115 If you are using an external monitor: ❖ Check that the monitor is turned on. ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet. ❖ Check that the cable connecting the external monitor to the device is firmly attached. ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Press F4 to make sure the display priority is not set for the built-in screen. The screen does not look correct.
If Something Goes Wrong Disk or storage drive problems ❖ Project to a second screen ❖ Adjust ClearType text 4 Click or touch OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 1280 x 800 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
If Something Goes Wrong Disk or storage drive problems 4 117 In the pop-up menu, click or touch Properties. The drive’s Properties box appears. 5 Click or touch the Tools tab. 6 Click or touch the Check button. The Error Checking box appears. The system will alert you if you need to scan the drive. 7 Even if you do not need to scan the drive for errors you can scan by clicking or touching Scan drive. Error-checking tests and repairs the storage drive. Your hard disk seems very slow.
If Something Goes Wrong Sound system problems Sound system problems No sound is coming from the device’s speakers. Adjust the volume control. Try pressing the F11 key to see if volume mute is disabled. Check that the volume control on the device is turned up. If you are using external headphones or speakers, check that they are securely connected to your device. The device emits a loud, high-pitched noise. This is feedback between the microphone and the speakers.
If Something Goes Wrong Wireless networking problems 119 The printer will not print what you see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode. This mode lets you see your work exactly as it will print. Contact the software manufacturer for more information.
If Something Goes Wrong Wireless networking problems ❖ Check the Windows® Control Panel's Device Manager to verify that the Wi-Fi® adapter is recognized by the Windows® operating system, and that the driver is loaded. To access the Device Manager, from the Start screen begin typing Control Panel and click or touch your selection. If you are in the Desktop screen, press the Windows® ( ) key to display the Start screen.
If Something Goes Wrong Develop good computing habits 121 Develop good computing habits Save your work frequently. You can never predict when your device will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips” on page 55 for instructions. On a regular basis, back up the information stored on your internal storage drive.
If Something Goes Wrong Develop good computing habits Data and system configuration backup in the Windows® operating system The Windows® operating system offers some easy-to-use features for backing up your Windows® settings and your data - documents and other important files. Take advantage of these features to protect yourself from much more difficult and time-consuming restoration procedures, and to safeguard your valuable data from loss.
If Something Goes Wrong Develop good computing habits 8 123 In the input field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click or touch Create. The Windows® operating system creates the restore point, automatically stamps it with the current date and time, and displays a message that the restore point was successfully created. 9 Click or touch Close.
If Something Goes Wrong Develop good computing habits Backing up your data or your entire device with the Windows® operating system The most valuable component of your device system is the data you create and store on its internal storage drive. Since problems with either hardware or software can make the data inaccessible or even destroy it, the next most valuable component of your device system may be a recent backup of your data.
If Something Goes Wrong Develop good computing habits 125 was in prior to the installation, undoing any changes that the installation process introduced. ❖ Back up your critical data (see “Backing up your data or your entire device with the Windows® operating system” on page 124). ❖ Have your back up media on hand in case you need any files from them.
If Something Goes Wrong Develop good computing habits USB Sleep and Charge is not working. USB Sleep and Charge may be disabled. Open the TOSHIBA Sleep and Charge utility to check if the feature is disabled and to enable it if necessary. ❖ Make sure that the device you want to charge is connected to a port that supports the USB Sleep and Charge function. Ports that support this feature are identified with the ( ) icon. ❖ USB Sleep and Charge may be disabled.
If Something Goes Wrong If you need further assistance 127 If you need further assistance If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance. Since some problems may be related to the operating system or the program you are using, it is important to investigate all sources. ❖ Review the troubleshooting information in your operating system documentation.
If Something Goes Wrong Toshiba’s worldwide offices Toshiba’s worldwide offices Australia Canada Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Toshiba Canada Ltd. 191 McNabb Street Markham, Ontario L3R - 8H2 Canada France Germany Toshiba Systèmes (France) S.A. 7, Rue Ampère; B. P.
Appendix A TOSHIBA Function Keys TOSHIBA Function keys provide a quick way to modify selected system functions and to launch applications. NOTE These TOSHIBA Function keys are only available when your device is attached to the keyboard. Functions TOSHIBA Function keys are used to set or modify the following system functions: ❖ Help file ❖ Brightness control ❖ Output (Display switch) ❖ Touch pad ❖ Media ❖ Volume mute ❖ Wireless ❖ Backlit keyboard ❖ Zoom Function keys 129 5.375 x 8.
TOSHIBA Function Keys Functions Help file This TOSHIBA Function key displays the help file. Display brightness This TOSHIBA Function key decreases the screen brightness. This TOSHIBA Function key increases the screen brightness. 5.375 x 8.375 ver 2.
TOSHIBA Function Keys Functions 131 Output (Display switch) This TOSHIBA Function key cycles through the display options and highlights the available options. ❖ PC screen only ❖ Duplicate ❖ Extend ❖ Second screen only (Sample Image) Display mode options window NOTE All of the above modes are always displayed on the screen, however only the available modes for your system are functional, depending on the attached external display(s). 5.375 x 8.375 ver 2.
TOSHIBA Function Keys Functions Disabling or enabling the touch pad This TOSHIBA Function key enables/disables the touch pad. To enable/disable the touch pad press F5. For more information on using the touch pad, see “Using the touch pad” on page 46. Media buttons This TOSHIBA Function key allows you to restart playing the current track or go to the previous track. This TOSHIBA Function key allows you to start playing or pause the media currently playing.
TOSHIBA Function Keys Functions 133 Volume Mute This TOSHIBA Function key enables/disables volume mute. When volume mute is enabled, no sound will come from the speakers or headphones. Disabling or enabling wireless devices This TOSHIBA Function key enables/disables the Wi-Fi® antenna in your computer. The wireless modes are: ❖ Disables the wireless antenna (Airplane mode is ON). ❖ Enables the wireless antenna (Airplane mode is OFF).
TOSHIBA Function Keys Functions Zoom Function keys This TOSHIBA Function key allows you to zoom out. This TOSHIBA Function key allows you to zoom in. This TOSHIBA Function key switches screen resolution. Fn+ [Space bar] Cycle through the screen resolutions, and then select the desired resolution. 5.375 x 8.375 ver 2.
Appendix B Power Cord/Cable Connectors Your device ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA Canada UL approved CSA approved United Kingdom Europe VDA approved NEMKO approved BS approved Australia AS approved 135 5.375 x 8.375 ver 2.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your device. Acronyms The following acronyms may appear in this User’s Guide.
Glossary DPI Dots Per Inch DVD Digital Versatile (or Video) Disc 137 DVD-ROM Digital Versatile (or Video) Disc Read-Only Memory eSATA external Serial Advanced Technology Attachment FAT File Allocation Table FCC Federal Communications Commission GB gigabyte GBps gigabytes per second HDD Hard Disk Drive HDMI High-Definition Multimedia Interface HDMI CEC High-Definition Multimedia Interface Consumer Electronics Control HTML Hypertext Markup Language IEEE Institute of Electrical and Ele
Glossary RFI Radio Frequency Interference ROM Read-Only Memory RTC Real-Time Clock SD Secure Digital SDRAM Synchronous Dynamic Random Access Memory SSD Solid State Drive TFT Thin Film Transistor USB Universal Serial Bus URL Uniform Resource Locator WAN Wide Area Network www World Wide Web Terms The following terms may appear in this User’s Guide. A active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology.
Glossary B 139 backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. Basic Input/Output System (BIOS)—See BIOS. baud rate—The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second). See also bits per second.
C Glossary cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD—An individual compact disc. See also CD-ROM. CD-ROM (Compact Disc Read-Only Memory)—A form of high-capacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM.
Glossary 141 controller—A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU—See Central Processing Unit (CPU). CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache.
Glossary disc—A round, flat piece of material, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk—A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as hard disks. Compare disc. See also hard disk.
Glossary 143 eSATA—An external device that supports hot swapping and fast data transfer. Very useful in storing and transferring large files. executable file—A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device—A device that connects to a computer to expand its capabilities.
Glossary Function key—(1) A feature in which certain keys in combination with the Fn key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. function keys—The keys labeled F1 through F12, typically located on the keyboard. Their function is determined by the operating system and/or individual programs. G ground—A conductor to which all components of an electric circuit are connected.
Glossary I 145 icon—A small image displayed on the screen that represents a function, file, or program. interlaced—A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device—See device. Internet—The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web.
Glossary load—To move information from a storage device (such as a hard disk) into memory for processing. local area network—See LAN. logical drive—A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives.
Glossary 147 non-interlaced—A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk—A disk for storing programs and data that cannot be used to start the computer. Compare system disk. O online—Available through the computer.
Glossary pointer—An icon (usually an arrow) that moves on the screen when you slide your finger across the touch pad or move a mouse. Used to point to and select/activate on-screen items, such as icons, menu items, and buttons. The shape and purpose of the pointer varies depending on the program you are using and what you are doing. pointing device—Any device, such as the touch pad or a mouse, that enables you to move the pointer on the screen.
Glossary 149 RGB (Red, Green, Blue) monitor—A monitor that reproduces all colors by mixing red, green, and blue light in various combinations. RJ45 connector—An eight-wire connector used to connect a computer to a network. ROM (Read-Only Memory)—Non-volatile memory that can be read but not written to. Non-volatile here means that information in ROM remains whether or not the computer is receiving power.
Glossary system prompt—The symbol (in the MS-DOS® operating system, generally a drive letter followed by a “greater than” sign) indicating where users are to enter commands. T TFT display—See active-matrix display. Touch—To activate items displayed on the screen, such as apps, setting icons, and on-screen buttons by touching them with your finger. Tile/Tiles—A list of square or rectangular icons on the Start screen representing applications that can be accessed by selecting them.
Index A AC adaptor 29 AC power 67 AC power light 29 accessing network 85 adding memory 35 optional external devices 34 adjusting touch pad settings 49 app, starting 62 apps searching 62 audio features 85 B backing up files 56, 63 Backlit keyboard 60 batteries battery life 66 care 76 determine remaining power 71 maximum capacity 66 monitoring power 69 power management 67 recharge time 66 safety precautions 76 battery care 76 changing 75 charge indicator light 30 charge time 67 charger 67 charging 31, 67 c
Index see System Settings C caring for your device 54 changing battery 75 charging the battery 31 cleaning the device 54 communications set up 84 computing habits troubleshooting 121 computing tips 55 connecting AC adaptor 29 AC adaptor cord to (DC-IN) 30 device to a network 85 external device 50 HDMI™-compatible TV or display device 51 power cord/cable 30 power source 30 customize device settings 53 D data/entire system backup troubleshooting 124 DC-IN indicator light 70 DC-IN charging indicator li
Index display brightness 130 Help file 130 media buttons 132 Output (Display switch) 131 volume mute 133 Zoom Function keys 134 function keys 59 H headphones using 86 I icon desktop 82 moving to desktop 82 recycle bin 82 safety 26 Shut down 33, 34 Initial setup using your device for the first time 31 internal storage drive recovery 35 K keyboard attaching 57 detaching 57 function keys 59 special Windows® keys 59 troubleshooting 114 using 59 keys function keys 59 L LEDs system indicator lights 70 AC ada
Index Micro HDMI™ 50 power connecting cable to AC adaptor 30 cord/cable 30 cord/cable connectors 135 energy-saving features 65 power down shut down 33 power management 67 optimum performance 67 power plans selecting power plan options 74 power saving options 73 printer troubleshooting 118 problem solving contacting Toshiba 127 Startup options 108 R real-time clock (RTC) battery 67 recording sounds 85 recovery creating recovery media 36 installing drivers and applications 45 internal storage drive 35
Index supervisor password, set up 92 system indicator lights AC power 29 LEDs 30, 31, 69, 70, 87 System Settings 97 screen is blank 114 error message, warning resume failure 106 Error-checking 116 external display problems 116 external keyboard 114 external monitor 115 good computing habits 121 hard disk drive is slow 117 high-pitched noise 118 installing hardware/software 124 keyboard 114 missing files/trouble accessing a drive 116 power and batteries 112 printer 118 restore points 122 screen does not lo
Index touch pad 46 Web Camera 87 using the keyboard 59 Utilities 90 V video projector adjusting display 53 W warranty standard limited warranty 27 Web Camera using 87 Web sites 127 Wi-Fi® wireless networking 84 Windows® Charms Devices 80 Search 80 Settings 80 Share 80 Start 80 Windows® charms 80 Windows® key 59 Windows® operating system desktop 81, 88 troubleshooting 107 Windows® Store 83 wireless networking 84 troubleshooting 119
