User's Manual Satellite Click 10 LX0W-C Satellite Click 10 LX5W-C
Table of Contents Chapter 1 TOSHIBA Legal, Regulatory, and Safety Copyright, Disclaimer and Trademarks .............................................. 1-1 Regulatory Information ......................................................................... 1-2 Video Standard Notice .......................................................................... 1-6 ENERGY STAR® Program .................................................................... 1-7 Disposing of the computer and the computer's battery ........
Chapter 5 Utilities and Advanced Usage Utilities and Applications ...................................................................... 5-1 Special features ..................................................................................... 5-3 TOSHIBA Password Utility ................................................................... 5-4 TruCapture ............................................................................................. 5-6 TruRecorder .............................................
Chapter 1 TOSHIBA Legal, Regulatory, and Safety This chapter states the legal, regulatory, and safety information applicable to TOSHIBA computers. Copyright, Disclaimer and Trademarks Copyright © 2015 TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Secure Digital and SD are trademarks of SD Card Association. MultiMediaCard, MMC, and eMMC are trademarks of MultiMediaCard Association.
Working environment This product was designed to fulfil the EMC (Electromagnetic Compatibility) requirements to be observed for so-called “Residential, commercial and light industry environments”. TOSHIBA do not approve the use of this product in working environments other than the above mentioned “Residential, commercial and light industry environments”. For example, the following environments are not approved: Industrial Environments (e.g.
Following information is only valid for EU-member States: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005.
Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
Following information is only for Turkey: Disposal of products: The crossed wheelie bin symbol means that this product should not be collected and disposed with other household wastes. When product become waste at the end-of-life, to protect environment and human health, it should be given to nearest collection recycling or disposal center. For more information about collection and recycling programs in your country please contact your local authority or the retailer where the product was purchased.
ENERGY STAR® Program Your Computer model may be ENERGY STAR® compliant. If the model you purchased is compliant, it uses the Energy Star logo and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency.
observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the following general precautions and to note the cautions included in the text of the manual. Provide adequate ventilation Always make sure that your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode).
Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
Make sure all disk/disc activity has ended before moving the computer. Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer. Close the display panel. Do not pick up the computer by its display panel. Before carrying your computer, shut it down, disconnect the AC adaptor and allow it to cool down. A failure to follow this instruction might result in minor heat injury.
A caution informs you that improper use of equipment or failure to follow instructions might cause data loss, equipment damage, or might result in minor or moderate injury. Please read. A note is a hint or advice that helps you make best use of your equipment.
Chapter 2 Getting Started This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by TOSHIBA, some of the features described in this manual might not function properly. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
Click Tap the Touch Pad or click the left Touch Pad control button once. Left-click the mouse once. Tap the touch screen once. Right-click Tap the Touch Pad with two fingers together or click the right Touch Pad control button once. Right-click the mouse once. Press and hold on the touch screen. Double-click Tap the Touch Pad or click the left Touch Pad control button twice. Left-click the mouse twice. Tap the touch screen twice. Start The word "Start" refers to the " lower-left corner of the screen.
Before you install a device or application, save any data in memory to the internal storage or other storage media. Failure to do so might result in data loss. Connecting/Removing TOSHIBA Keyboard Dock TOSHIBA Keyboard Dock provided with some models can turn your tablet into a laptop for extensibility including a physical keyboard and extra ports. To use in laptop mode, you need to connect TOSHIBA Keyboard Dock to the tablet by following the steps below: 1.
Figure 2-2 Opening the computer Product appearance depends on the model you purchased. Open and close the computer with reasonable care. Opening it vigorously or slamming it shut might cause damage. Be careful not to open the computer too wide as it might put stress on the hinges and cause damage. Be careful not to hurt your fingers when docking the computer to the keyboard dock. The rear of the keyboard dock is designed as a fulcrum, and moves slightly upwards when the computer is opened.
To disconnect and remove the computer from the keyboard dock, do the following: Failure to follow the procedures below may result in data loss. 1. 2. Disconnect and remove all peripheral devices and cables connected to the computer. Press down the release button while holding the middle-top side of the display panel first and then lift it to release it from the computer holder and completely off the keyboard dock. Figure 2-3 Removing the computer from the keyboard dock 1 1.
converts AC power to DC power and reduces the voltage supplied to this computer. Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor.
Figure 2-4 Plugging the Micro-USB cable into computer 2 2 PIN 3 PIN 1 1. Micro-USB port 2. Micro-USB connector Product appearance depends on the model you purchased. Either a 2-pin or 3-pin adaptor/cord is included with the computer depending on the model. The Micro-USB connector of the AC adaptor must be correctly plugged into the Micro-USB port on the computer. Failure to do so correctly might result in possible damage to the Micro-USB port. 2. Plug the power cord into a live wall outlet.
After you turn on the power for the first time, do not turn it off until you have set up the operating system. Volume cannot be adjusted during Windows Setup. Low battery icon ( ) appears if the remaining battery power is less than 2%. In this instance, connect the AC adaptor to the computer. The computer can not be powered on by pressing the power button if the battery power is completely exhausted.
Task view Task view ( ) is launched from Windows taskbar at the bottom of the screen. Task view allows you to view the apps that are currently running. Also, you can create custom desktops so that running apps can be grouped for entertainment, productivity, or what you just want. To do this, click the Task view icon , and then click New desktop. Open the apps you want to use on that desktop. To switch between desktops, click Task view again.
Sign-in options Windows offers a number of sign-in options including Password ( ), PIN ( ) and Picture password ( ) authentication to prevent from unauthorized access. If you have multiple sign-in methods set for a user account, you can select an option on the Windows login screen by clicking sign-in options. Password authentication is the default sign-in option. Tablet mode Tablet mode enables touch-optimized working environment without keyboard and mouse.
Restarting the computer Certain conditions require that you reset the computer, for example if: You change certain computer settings. To restart the computer, there are several ways this can be achieved: Click Start -> Power and then select Restart. Press CTRL, ALT, and DEL simultaneously (once) to display the menu window, and then select Restart by clicking the power icon ( in the lower-right corner.
To restore the operation of the computer from Sleep Mode, press and hold the power button for a short amount of time. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode. To prevent the computer from automatically entering Sleep Mode, disable Sleep Mode within the Power Options.
Data will be lost if you disconnect the AC adaptor before the save is completed. Automatic Hibernation Mode The computer can be configured to enter Hibernation Mode automatically when battery power is exhausted to the point that computer operation cannot be continued. This can be specified in the Power Options. To define these settings, do the following: 1. 2. 3.
This recovery media can be used to restore your system after you have erased your internal storage. Creating Recovery Media This section describes how to create Recovery Media. Be sure to connect the AC adaptor when you create Recovery Media. Be sure to close all other software programs. Do not run software such as screen savers which can put a heavy load on the CPU. Operate the computer at full power. Do not use power-saving features. Do not write to the media when the virus check software is running.
5. Follow the on-screen instructions to finish creating the Recovery Media. Restoring the pre-installed software from your created Recovery Media If the pre-installed files are damaged, you are able to use the Recovery Media you have created to restore the computer to the state it was in when you originally received it. To perform this restoration, do the following: Make sure that the AC adaptor is connected during the restoring process.
Make sure that the AC adaptor is connected during the restoring process. Make sure to dock the computer to TOSHIBA Keyboard Dock before restoring the operating system. When you reinstall the Windows operating system, the internal storage will be reformatted and all data will be lost. 1. 2. 3. 4. 5. Click Start -> Power and then select Restart. Hold down 0 (zero) key and then release this key one second after the computer is power on.
Creating Recovery Media This section describes how to create Recovery Media. Be sure to connect the AC adaptor when you create Recovery Media. Be sure to close all other software programs except the Recovery Media Creator. Do not run software such as screen savers which can put a heavy load on the CPU. Operate the computer at full power. Do not use power-saving features. Do not write to the media when the virus check software is running.
Make sure that you create recovery media by using Recovery Media Creator instead of the recovery drive creating option in Windows system. Otherwise, Recovery Media Creator will not work and TOSHIBA HDD Recovery option in TOSHIBA Maintenance Utility will not exist if you restore the computer from the recovery media you created by options in Windows system.
However, if you have already created a "Recovery Media", you can use it to restore the recovery partition. If you have not created "Recovery Media", contact TOSHIBA support for assistance. Restoring the pre-installed software from the Recovery Partition A portion of the total internal storage space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem.
After the System Protection feature is enabled, you can undo changes by reverting your tablet to a previous state by creating a restore point.
Chapter 3 The Grand Tour This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section. Handle your computer carefully to avoid scratching or damaging the surface. The Computer (tablet mode) The following figure shows essential components of the computer.
Figure 3-1 The computer in tablet mode 5 6 2 1 3 7 2 4 7 8 9 10 11 12 13 1. Wireless communication antennas (not shown) 2. Microphones* 3. Display screen 4. Web Camera (front) 5. Power button 6. Volume up/down button 7. Stereo speakers 8. Windows button 14 13 16 15 9. Memory media slot 10. Headphone/Microphone combo jack 11. HDMI micro port 12. Micro-USB port 13. Guide pin grooves 14. Docking interface 15. Strap hole 16. Web Camera (back) * Provided with some models.
Display screen 25.4 cm (10") LCD screen, configured with the following resolution: WUXGA, 1920 horizontal x 1200 vertical pixels Be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen is somewhat brighter than when it operates on battery power. This difference in brightness levels is intended to save power when operating on batteries. Legal Footnote (LCD) For more information regarding LCD, refer to the Legal Footnotes section.
Memory media slot This slot lets you insert a micro SD™/SDHC™/ SDXC™ memory card. Refer to the Memory media section for more information. Keep foreign metal objects, such as screws, staples, and paper clips, out of the Memory media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Headphone/ Microphone combo jack A 3.5 mm mini headphone/microphone combo jack enables connection of a monaural microphone or a stereo headphone.
Be careful when you connect and use chunky USB devices, the computer might be lifted. Any possible stress put on the body of the tablet computer might cause damage. Guide pin grooves Designed to engage the guide pins on the keyboard dock. Docking interface Designed to engage the docking connector on the keyboard dock. Strap hole This hole is used for hanging decorations. Web camera (back) Your computer is also equipped with a back Web Camera used for recording video or taking photographs.
Right side The following figure shows the right side of the computer. Figure 3-4 The right side of the computer 1 1. Universal Serial Bus (USB 2.0) port Product appearance depends on the model you purchased. Back The following figure shows the back of the computer. Figure 3-5 The back of the computer Product appearance depends on the model you purchased. Front with the display open This section shows the computer with the display panel open.
TOSHIBA Keyboard Dock The following figure shows each important component of the keyboarddock. Figure 3-7 The keyboard dock 2 1 2 4 3 8 1. Docking connector 2. Guide pins 3. Release button 4. Computer holder 8 5 6 7 5. Universal Serial Bus (USB 2.0) port 6. Keyboard 7. Touch Pad 8. Touch Pad control buttons Product appearance depends on the model you purchased. Docking connector Connect the keyboard dock to this connnector to support keyboard, Touch Pad, and USB 2.0 port functions.
Be careful when you connect and use chunky USB devices, the computer might be lifted. Any possible stress put on the body of the tablet computer might cause damage. Keyboard The keyboard contains character keys, control keys, function keys, shortcut keys and special Windows keys. Touch Pad The Touch Pad located in the palm rest is used to control the movement of the on-screen pointer. Refer to the The Keyboard section for details.
For more information regarding Battery Life, refer to the Legal Footnotes section. CPU The processor type varies depending on model. To check which type of processor is included in your model, click Control Panel -> System and Security -> System under Windows System group in All apps. Legal Footnote (CPU) For more information regarding CPU, refer to the Legal Footnotes section. Internal storage The capacity of the internal storage varies depending on the model.
For more information regarding Graphics Processing Unit (GPU), refer to the Legal Footnotes section.
Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Operating in tablet mode Observe the following instructions when you operate the computer in tablet mode. Figure 4-1 Operating the computer in tablet mode Remove all external peripheral devices and their connection cables from the computer before carrying. Hold the computer firmly on your forearm. Be careful not to accidentally touch the Windows button.
Figure 4-2 Rotating the computer sideways 2 1 1. Landscape mode 2. Portrait mode To manually disable the automatic screen orientation, do the following: 1. 2. on the Windows taskbar. Click the action center icon Click Rotation lock that the automatic screen orientation is currently disabled. When operating the computer in laptop mode, however, the automatic screen orientation is locked, and the computer stays in landscape mode.
Figure 4-3 Calibrating digital compass Do not place any products utilizing magnetic materials in close proximity to the area marked in the following figure. Using the Touch Screen You can use your finger to manipulate icons, buttons, menu items, the onscreen keyboard, and other items on the touch screen. User's Manual Tap Simply tap your finger once on the touch screen to activate an item, such as an app. Press and hold Press your finger down and leave it there for a few seconds.
Rotate Put two or more fingers on an item and then turn your hand to rotate things in the direction you turn your hand. Only some items can be rotated. Slide Drag your finger on the touch screen to move through what is on the screen. Swipe Quickly move your finger in from the edge of the screen, without pausing when you first touch it. Swipe from the left edge: views all your open apps in task view. Swipe from the right edge: opens the Action center.
Pinch or stretch Place two or more fingers down on the Touch Pad and move them toward each other (pinch) or away from each other (stretch). This shows different levels of information or visually zooms in or out. Two-Finger Scroll Place two fingers down and slide them vertically or horizontally from anywhere on the Touch Pad. This allows you to operate the scroll bars of a window. Do not put items on the Touch Pad surface to prevent abnormal actions.
Special function mode Standard F1F12 mode Function F2 FN + F2 Decreases the brightness of the display panel in individual steps. F3 FN + F3 Increases the brightness of the display panel in individual steps. F4 FN + F4 Changes the active display device. To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. F5 FN + F5 Enables or disables the Touch Pad. F6 FN + F6 Moves media backward.
Touch keyboard Touch keyboard is an on-screen virtual keyboard allowing you to type on the touch screen. To use the touch keyboard, tap in an area where you can type. The keyboard opens automatically. To manually open the touch keyboard, click the keyboard icon ( taskbar of your Windows desktop. ) in the 3D Playback on an External 3D Device 3D playback on an external 3D device feature is only provided with some models. Effect of 3D can be shown only on an external 3D devices connected via an HDMI output.
Battery pack The tablet computer contains a battery pack inside, Also, depending on the model you purchased, the keyboard dock might contain a second battery pack to extend the battery operating time. When the AC adaptor is not connected, the main power source of the computer is the lithium ion battery pack. Real-Time Clock (RTC) function The Real-Time Clock (RTC) function is supported.
Use only the computer connected to an AC power source or optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger. Charging Time The following table shows the approximate time required to fully charge an exhausted battery pack. Battery pack type Power off Power on Battery pack (22.5 Wh, about 4 hours 1S2P cell) about 6.5 hours With the second battery pack (22.
Repeat these steps two or three times until the battery pack recovers normal capacity. Monitoring battery pack capacity Remaining battery power can be monitored using the following methods. Clicking the battery icon on the Windows taskbar Via the Battery Status (average remaining battery power of Battery1 and Battery2) in the Windows Mobility Center window When you use the computer with the keyboard dock, the second battery pack is the first source to provide power.
Battery pack exhausted time When you turn off the power of your computer with the battery pack fully charged, the battery pack exhaust within the following approximate period. Battery pack type Sleep Mode Shut Down Mode Battery pack (22.5 Wh, about 205 hours 1S2P cell) about 265 days With the second battery pack (22.5 Wh, 1S2P cell) about 325 days about 300 hours Extending battery life To maximize the life of your battery pack, do the following at least once a month. 1. 2. 3. 4. 5.
Figure 4-4 Examples of memory media(microSD card) Points to note about the memory media card microSD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music. For this reason, you cannot copy or play back protected material on another computer or other device, and you cannot reproduce any copyrighted material except for your personal enjoyment. The supported maximum capacity of memory card is 128GB.
Do not remove a card while read/write is in progress. For more details on using memory cards, see manuals accompanying the cards. Inserting memory media The following instructions apply to all types of supported media devices. To insert memory media, do the following: 1. 2. 3. Turn the memory media so that the contacts (metal areas) face down. Insert the memory media into the memory media slot on the computer. Press the memory media gently until it clicks into place.
When inserting the memory media, do not touch the metal contacts. You might expose the storage area to static electricity, which can destroy data. Do not turn off the computer or switch to Sleep Mode or Hibernation Mode while files are being copied. Failure to do so might cause data loss. Removing memory media The following instructions apply to all types of supported media devices. To remove memory media, do the following: 1. 2. 3. 4.
As the port operation of all HDMI display devices have not been confirmed, some HDMI display devices might not function properly. To connect a device to the HDMI out port, you must purchase a suitable HDMI cable. 1. 2. 3. Plug one end of the HDMI cable into the HDMI in port of the HDMI display device. Plug the other end of the HDMI cable into the HDMI Micro port on your computer. Turn the HDMI display device's power on.
When you change the display output device, the playback device might not switch automatically. In this case, to set the playback device to the same device as the display output device, adjust the playback device manually by the following steps: 1. Click Control Panel -> Hardware and Sound -> Sound under Windows System group in All apps. 2. In the Playback tab, select the playback device which you want to switch to. 3. To use the internal speakers on your computer, select Speakers.
An external display with HDMI port and a Wireless display adaptor. The Wireless display adaptor is a device that connects to the external display via HDMI port and can receive Wi-Fi signals from your computer. To wirelessly connect to an external display, do the following: 1. 2. 3. Go to Settings and click Devices -> Connected devices. Click Add a device. Your computer will start searching for the Wireless display device.
To launch the Volume Mixer utility, right-click on the speaker icon on the Windows taskbar, and then select Open Volume Mixer from the sub menu. To adjust the volume level of speakers or headphones, move the Speakers slider. To adjust the volume level of an application that you are using, move the slider for the corresponding application. Microphone Level To change the microphone recording level, do the following: 1. 2. 3.
Chapter 5 Utilities and Advanced Usage This chapter describes the utilities and special features of this computer, and the advanced usage of some utilities. Utilities and Applications This section describes the pre-installed utilities that come with the computer and details how to start them. For further information on their operation, refer to online manual, help files, or README.TXT file (if applicable) of each utility.
TruRecorder This software is a recording application that can check its recorded data quickly and easily, analyze voices to automatically identify specific speakers,and allow you to mark important statements in the recording. To access it, click TruRecorder in All apps. This utility is only provided with some models. For more information, refer to the TruRecorder section.
Dolby® Digital Plus™ Advanced Audio™ Dolby Digital Plus Advanced Audio is a suite of audio technologies that enables a PC to deliver a crisp, clear cinematic surround sound experience over its built-in speakers. It also adds clarity to sound from headphones. To access this utility, 1. 2. 3. Click Dolby Digital Plus Advanced Audio in All apps. Click Dolby Digital Plus Advanced Audio on the desktop. Click Dolby Digital Plus Advanced Audio from Start menu.
Low battery When battery power is exhausted to the point automatic Hibernation that computer operation cannot be continued, the system automatically enters Hibernation Mode Mode *1 and shuts itself down. This can be specified in the Power Options. TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set by the TOSHIBA Password Utility function are different from the Windows password.
Owner String (text box) You can use this box to associate text with the password. After you enter text, click Apply or OK. When the computer is started, this text is displayed together with the prompt asking you to enter a password. You can launch the BIOS setup to set, change or delete the HDD Password or HDD Master Password. If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE.
At this point, the function keys do not work. They will function after you enter the password. 2. 3. Enter the Password. Press ENTER. If you enter the password incorrectly three times in a row, or if you do not enter the password within 1 minute, the computer shuts off. In this case, some features that can power on the computer automatically (Wake-up on LAN, Task Scheduler, etc) might not work. You must turn the computer back on to retry password entry.
device, Network device, HDD/SSD, Optical Disc drive), operating system information (that is: OS version, settings (power button action, lid close action, property of taskbar, file extension settings, user profile number), error information (BSoD, application error) ), device operation time and number of actuations or status changes (that is: number of power button and FN key combination uses, AC adaptor, battery (for models with battery), LCD, fan (for models with fan), HDD/SSD, sound volume, wireless commu
Chapter 6 Troubleshooting TOSHIBA has designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. You should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place. Problem-solving process If you observe the following guidelines, resolving problems will be much easier.
Check all cables to ensure that they are correctly and firmly attached to the computer - loose cables can cause signal errors. Inspect all connecting cables for loose wires and all connectors for loose pins. Check that your disc media is correctly loaded Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster.
Hardware If you cannot find a software problem, you should then check the setup and configuration of your hardware. First run through the items in the preliminary checklist as described previously then, if you still cannot correct the problem, try to identify the source. The next section provides checklists for individual components and peripherals.
Verify that the computer is on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source. The computer does not load advanced options during startup By holding down one of the following keys or buttons during startup, your computer can load the following advanced options.
Power When the computer is not plugged into an AC power outlet, the battery pack is the primary power source. Your computer also has Real-Time Clock (RTC) function. All of the power resources are interrelated with anyone having the ability to produce apparent power problems. Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer automatically shuts down to prevent any damage. In this instance, all unsaved data in memory is lost.
Problem Procedure Battery does not power the computer as long as expected If you frequently recharge a partially charged battery, the battery might not charge to its full potential. In these instances, you should fully discharge the battery and then attempt to charge it again. Check the Power saver option under Choose or customize a power plan in the Power Options. Real-Time Clock Problem Procedure The BIOS setting and system date/ time are lost. The charge of the Real-Time Clock (RTC) has run out.
Problem Procedure No display Press the shortcut keys to adjust the display priority, and to make sure that it is not set for output to an external monitor. Markings appear on the computer's display panel. These marks might have come from contact with the keyboard and Touch Pad while the display panel has been closed. Try to remove the marks by gently wiping the display panel with a clean dry cloth or, if this fails, with a good quality LCD screen cleaner.
Touch Pad Problem Procedure The Touch Pad does Check the Device Select settings by the following not work. steps: Click Control Panel -> Hardware and Sound -> Mouse under Windows System group in All apps. On-screen pointer does not respond to pointing device operation In this instance, the system might be busy. Try moving the mouse again after waiting a short while.
USB mouse Problem Procedure On-screen pointer does not respond to mouse operation In this instance, the system might be busy. Try moving the mouse again after waiting a short while. Remove the mouse from the computer and then reconnect it to a free USB port to ensure that it is firmly attached. Double-clicking does In this instance, you should initially try changing not work the double-click speed setting within the Mouse Control utility. 1. 2. 3.
Problem Procedure USB device does not Remove the USB device from the computer and work then reconnect it to a free port to ensure that it is firmly attached. Ensure that any required USB device drivers are properly installed. To achieve this, you should refer to both the device documentation and the operating system documentation. Sound system In addition to the information in this section, also refer to the documentation supplied with your audio device.
Problem Procedure Monitor does not turn on After confirming that the monitor's power switch is on, check the connections to make sure that the power cord/adaptor is firmly connected to the monitor and to a working power outlet. No display Try adjusting the contrast and brightness controls on the external monitor. Press the shortcut key to change the display priority and ensure that it is not set for the internal display only. Check to see if the external monitor is connected.
Bluetooth Problem Procedure Cannot access Bluetooth device Check to ensure that the wireless communication function of the computer is on. Check to ensure that the Bluetooth Manager application is running on the computer and that power to the external Bluetooth device is turned on. Check to ensure that no optional Bluetooth Adaptor is installed in the computer. The built-in Bluetooth hardware cannot operate simultaneously with another Bluetooth controller.
Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions The following physical dimensions do not include parts that extend beyond the main body. The physical dimensions might vary depending on the model you purchased. Size Approximately 258.8 (w) x 178 (d) x 9.05 (h) millimeters (tablet mode) Approximately 258.8 (w) x 178 (d) x 19.4~21.6 (h) millimeters (laptop mode) (not including parts that extend beyond the main body).
Computer 5 V DC Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n, b/g/n or Revision a/b/g/n/ac), as defined and approved by the Institute of Electrical and Electronics Engineers.
however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless products are safe for use by consumers.
Security TOSHIBA strongly recommends that you enable encryption functionality, otherwise your computer is open to illegal access by an outsider using a wireless connection. If this occurs, the outsider might illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications Compatibility IEEE 802.
High-power radars are allocated as primary users (i.e. priority users) of the bands 5.25 to 5.35GHz and 5.65 to 5.85GHz and that these radars could cause interference and/or damage to LE-LAN devices. Bluetooth wireless technology Some computers in this series have Bluetooth wireless communication function which eliminates the need for cables between electronic devices such as computers, printers, and mobile phones.
Italy: - For private use, a general authorization is required if WAS/ RLAN’s are used outside own premises. For public use, a general authorization is required. Luxembourg: Implemented General authorization required for network and service supply. Norway: Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Alesund. Russian Federation: - Only for indoor applications.
Restrictions for Use of 5470-5725MHz Frequencies in Europe Italy: - For private use, a general authorization is required if WAS/ RLAN’s are used outside own premises. Luxembourg: Implemented General authorization required for network and service supply Russian Federation: Limited e.i.r.p 100mW. Permitted to use only for indoor applications, closed industrial and warehouse areas, and on board aircraft. 1. 2.
Les dispositifs fonctionnant dans la bande 5.15-5.25GHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5.25-5.35GHz et 5.65-5.
Article 14 The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
(1)(2) (3)(4) (5) 1. 2. 3. 4. 5. 2.4: This equipment uses a frequency of 2.4 GHz. DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. 4: The interference range of this equipment is less than 40 m. : This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. Indication for Bluetooth The indication shown below appears on this equipment. (1) (2) (3) 1 (4) 1. 2. 3. 4. 2.
Broadcom® BCM43340 802.11a/g/n Wireless LAN and Bluetooth The Name of the radio equipment: BCM43340 Telefication B.V. Ltd. Approval Number: D1500057201 The following restrictions apply: Do not disassemble or modify the device. Do not install the embedded wireless module into other device. Radio approvals for wireless devices This equipment is approved to the radio standard by the countries/regions in the following table.
CPU performance in your computer product might vary from specifications under the following conditions: use of certain external peripheral products use of battery power instead of AC power use of certain multimedia, computer generated graphics or video applications use of standard telephone lines or low speed network connections use of complex modeling software, such as high end computer aided design applications use of several applications or functionalities simultaneously use of computer in areas with low
Various system components (like the video adapter’s GPU and PCI devices like Wireless LAN, and so on) require their own memory space. Since a 32-bit operating system cannot address more than 4 GB of memory, these system resources overlap the physical memory. It is a technical limitation that the overlapped memory is not available to the operating system.
operating in AC power mode and might decrease considerably when operating in battery power mode. Total Available Graphics Memory is the total of, as applicable, Dedicated Video Memory, System Video Memory and Shared System Memory. Shared System Memory varies depending on system memory size and other factors.
1. 2. 3. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.
Portions of this software are copyright (C) The FreeType Project www.freetype.org All rights reserved. """ Please replace with the value from the FreeType version you actually use. Legal Terms ============ 0.
Redistribution of source code must retain this license file (`FTL.TXT`) unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files. Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation.
Index A G AC adaptor additional 4-17 connecting 2-5 B Graphics Processing Unit 3-9 H HDMI Micro port 3-4 Battery extending life 4-11 monitoring capacity 4-10 save mode 5-3 K Keyboard function keys 4-5 Function keys F1...
Touch Pad 3-8 Power Hibernation Mode 2-12 panel on/off 5-3 Shut Down mode 2-10 Sleep Mode 2-11 turning off 2-10 turning on 2-7 Problems Analyzing the problem 6-2 Battery 6-5 Dual Pointing device 6-7 External monitor 6-10 Hardware and system checklist 6-4 Internal display panel 6-6 Internal Storage 6-7 Keyboard 6-6 Memory Media Card 6-7 Overheating power down 6-5 Power 6-5 Real-Time Clock 6-6 Sound system 6-10 TOSHIBA support 6-12 Touch Pad 6-8 USB device 6-9 USB mouse 6-9 setting 2-11 Sound system problems
