Operation Manual

Problem Procedure

Battery does not

power the computer

as long as expected

If you frequently recharge a partially charged

battery, the battery might not charge to its full

potential. In these instances, you should fully

discharge the battery and then attempt to charge it

again.

Check the Power saver option under Choose or

customize a power plan in the Power Options.

Real-Time Clock

Problem Procedure

The BIOS setting

and system date/

time are lost.

The lasting time of the Real-Time Clock (RTC) has

run out. You must set the date and time in the

BIOS setup utility by using the following steps:

Click the power icon (

) on the Start screen

and then select Restart.

2. Hold down the F2 key and then release this

key one second after the computer is power

on. The BIOS setup utility will load.

3. Set the date in the System Date field.

4. Set the time in the System Time field.

5. Press F10 - a confirmation message will be

displayed.

6. Select Yes - the BIOS setup utility will end

and the computer will restart.

Keyboard

Keyboard problems can be caused by the setup and configuration of the

computer. Refer to the The Keyboard section for further information.

Problem Procedure

Output to screen is

garbled

Refer to your software documentation to ensure

that it is not remapping the keyboard in any way

(remapping involves changing or reassigning the

function of each key).

If you are still unable to use the keyboard, you

should contact TOSHIBA Support.

User's Manual 6-6