User Guide

4 Replacement Procedures
4-30 Satellite A70 Series Maintenance Manual
Installing the Display Assembly
To install the display assembly, follow the steps below and refer to the figures in the preceding section.
1. Seat the display assembly taking care not to crush to the LCD display cable, the LCD power cable,
or wireless LAN antenna.
2. Secure two M2.5x8 black screws to each hinge and two black M2.5x8 black screws to the
computer’s back side (which help hold the display assembly in place).
3. Feed the wireless LAN module’s antennae wires through the small hole beside the LCD display
cable connector.
4. Connect the LCD power cable to the top chassis.
5. Connect the LCD display cable and secure it with one M2.5x3 black screw.
6. Reinstall the keyboard and wireless LAN module.