User Guide

Replacement Procedures 4.22 Fluorescent Lamp
8. Install the bezel (F) on the lamp cover and hook the four latches on the lamp cover
and two latches on the P-chassis.
Bezel
(1) Hitch the hook of the bezel on
the rib of the P-chassis.
Be careful not to stick
the protection cover G
on the TCP
(2) Lean the bezel on the lamp cover
without interference with the
TCP
Lump cover side
Figure 4-163 Replacing Sharp fluorescent lamp (XGA-HCSV) (20)
4-160 Satellite A50/TECRA A2 Maintenance Manual (960-478)