User Guide

4.22 Fluorescent Lamp Replacement Procedures

4. Turn the LCD module face down and remove the two screws (E) fixing the board.

Then open the bent portion of the TCP of the board and remove the backlight.

Screw

Screw loosening torque: 1.2kg.cm

Figure 4-147 Replacing Sharp fluorescent lamp (XGA-HCSV) (4)

Do not hold the edge.

Figure 4-148 Replacing Sharp fluorescent lamp (XGA-HCSV) (5)

Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-147