User Guide

Replacement Procedures 4.22 Fluorescent Lamp
5. Place the lower diffusion sheet (O), lower lens sheet (M), upper lens sheet (L) and
upper diffusion sheet (K) on the backlight unit with light guide plate (P).
An Order of the sheets
placing is: (O), (M), (L)
and (K).
Make sure there is no dust or scratch.
Do not make any sheet
over the edge of P-
chassis.
Figure 4-136 Replacing Sharp fluorescent lamp (XGA-CSV) (16)
4-136 Satellite A50/TECRA A2 Maintenance Manual (960-478)