Manualshelf

User Guide

ManualsBrandsToshiba ManualsOthersatellite a50 tecra a2
331332333334335336337338339340
4.22 Fluorescent Lamp Replacement Procedures
4. Turn the LCD module face down and remove the three screws (D) fixing the board.
Then open the bent portion of the TCP of the board and remove the backlight.
Screw loosening torque: 1.2kg.cm
Figure 4-124 Replacing Sharp fluorescent lamp (XGA-CSV) (4)
Do not hold the edge.
Do not hold the edge.
Figure 4-125 Replacing Sharp fluorescent lamp (XGA-CSV) (5)
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-127