User Guide

Replacement Procedures 4.22 Fluorescent Lamp
2. Remove the five screws on the sides.
Screw loosening torque: 1.2kg.cm
Figure 4-122 Replacing Sharp fluorescent lamp (XGA-CSV) (2)
3. Turn the LCD module face up and remove the bezel (E).
[3) Release the hook of the bezel
from the P-chassis.
Be careful not to stick
the protection cover G
on the TCP.
(1) Release the bezel from the
four latches of the P-chassis.
(2) Release the bezel from the
one latch of the P-chassis.
Figure 4-123 Replacing Sharp fluorescent lamp (XGA-CSV) (3)
4-126 Satellite A50/TECRA A2 Maintenance Manual (960-478)