User Guide

4.22 Fluorescent Lamp Replacement Procedures
4.22.8 Replacing the 15.0 Inch XGA (CSV) Sharp Fluorescent Lamp
Removing the 15.0-inch XGA (CSV) Sharp fluorescent lamp
To remove the 15.0-inch XGA Sharp Fluorescent Lamp, follow the steps below and refer to
Figures 4-121 to 4-130.
1. Turn the LCD module face down, and remove the protection cover SC (A), protection
cover G (B) and two fixing tapes (C).
CAUTION: 1) Be careful not to damage the TCP and chip.
2) Discard the tapes removed.
3) The protection cover G (B) is reused. Do not peel off the place sticked to
the bezel.
Figure 4-121 Replacing Sharp fluorescent lamp (XGA-CSV)) (1)
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-125