User Guide

Replacement Procedures 4.22 Fluorescent Lamp
4-112 Satellite A50/TECRA A2 Maintenance Manual (960-478)
10. Stick the protection cover G (B), protection cover S (A), fixing tape (C) and fixing
tape for lead wire (D).
(A)
(C)
(B)
0 to 1 mm
(D)
Do not make the tape over the top of the module.
The tape MUST NOT appear on the display.
Stick the tape according to the outline of
the LCD module. Make sure the tape does
not appear on the side of the module.
Figure 4-105 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (23)