User Guide

Replacement Procedures 4.22 Fluorescent Lamp
8. Install the bezel (E) on the lamp cover and hook the four latches on the lamp cover
and two latches on the P-chassis.
(E) Bezel
(1) Hitch the hook of the bezel
on the rib of the P-chassis.
<Side view>
Hook
(2) Lean the bezel on the lamp cover without
interference with the TCP.
Figure 4-102 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (20)
Make sure of mating of the bezel and the rib of the P-chassis.
Make sure of mating the bezel and
the latch of the P-chassis.
Make sure of mating of the bezel
and the latch of the P-chassis.
Figure 4-103 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (21)
4-110 Satellite A50/TECRA A2 Maintenance Manual (960-478)