User Guide

4.22 Fluorescent Lamp Replacement Procedures
2. Remove the four screws on the sides.
Screw loosening torque:
Screw
Screw
Screw
Screw
Figure 4-84 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (2)
3. Turn the LCD module face up and remove the bezel (E).
(3) Release the hook of the
bezel from the lamp cover.
(E) Bezel
< Side view >
Hook
(1) Release the bezel from the
four latches of the lamp cover.
(2) Release the two latches (left and right)
on the P-chassis.
Figure 4-85 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (3)
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-97