User Guide

4.21 Wireless LAN Antenna/Speaker/Hinge 4 Replacement Procedures
11. Remove the following screws securing the speakers.
• M2. 5x6B THIN BIND screw x1
CAUTION: When removing the speakers, be careful not to touch the metal part of the
speakers. It might damage the speakers.
12. Peel off four glass tapes and pull out the speaker cable (blue) to the surface.
Remove the cable from the guide and remove the left speaker. Pull out the right
speaker to remove.
Glass Tape
M2.5x6B THIN BIND
Left speaker
Right speaker
Speaker Cable (Blue)
Figure 4-48 Removing Speakers
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-63