User Guide

4 Replacement Procedures 4.19 LCD Unit/FL Inverter

Installing the FL inverter/LCD unit

The following describes the procedure for installing the LCD unit/FL inverter (See Figure 4-

37 to 4-40).

1. (For 14.1-inch LCD made by Samsung only)

Attach the aluminum tape on the LCD unit.

CAUTION: When attaching the aluminum tape, be careful with the followings:

* Right of back of the LCD (enlarged view)

Fit the edge of LCD to the bending

line of aluminum tape.

Bend the aluminum tape according

to these lines.

* Right of side of the LCD (enlarged view)

Bend the aluminum tape to the side.

* Left side of side of the LCD (enlarged view)

4-54 Satellite A50/TECRA A2 Maintenance Manual (960-478)