User Guide

4.19 LCD Unit/FL Inverter 4 Replacement Procedures
8. Remove the following screws securing the LCD brackets. Remove the LCD
brackets from the LCD module.
• M2x3 SUPER THIN BIND screw x4
M2x3C SUPER THIN BIND
LCD Bracket
M2x3C SUPER THIN BIND
Figure 4-39 Removing LCD Bracket
9. (For 14.1-inch LCD made by Samsung only)
Remove the aluminum tape from the LCD module.
NOTE: Do not apply power on ICs under aluminum tape because they are easily
broken.
When discarding broken ICs or FL tube, follow regulations of the local
area.
Aluminum tape
Figure 4-40 Removing Aluminum Tape
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-53