User Guide

4.16 Battery Latch 4 Replacement Procedures
4.16 Battery Latch
Removing the Battery latch
The following describes the procedure for removing the battery latch (See Figure 4-32, 4-33).
1. While pressing projections of the SB latch button inside each other, push the SB
latch button to the bottom of the base assembly to remove.
Figure 4-32 Removing SB Latch Button
2. Remove the battery lock L from the base assembly and remove the spring from the
battery lock L.
Base Assembly
Projection of the SB latch button
Battery Lock L
SB Latch Button
Spring
(Back view)
Projection
Base Assembly
Figure 4-33 Removing Battery Lock L
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-45