User Guide

4.11 Display Assembly 4 Replacement Procedures
5. (For wireless LAN models only)
Pull out the wireless LAN cables from the slot near the center of the base assembly.
NOTE: (For wireless LAN models only) When removing the display assembly, be careful
not to cut or scratch the wireless LAN cables.
6. Unhook the latches between the display assembly and the base assembly. Lift the
display assembly up and remove it from the base assembly.
Display Assembly
Base Assembly
Figure 4-25 Removing Display Assembly (3)
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-35