User Guide

4 Replacement Procedures 4.11 Display Assembly
3. Turn the computer face up. Open the display and disconnect the LCD cable and the
speaker cables (Blue, Red) from the connectors on the system board. Unlock the
connector and disconnect the touch pad cable from the system board.
4. Remove the following screws securing the display assembly.
• M2x8B BIND screw x1
• M2.5x8B THIN BIND screw x1
M2.5x8B THIN BIND
M2x8B BIND
PJ5600
Right Speaker Cable (Red)
LCD Cable
PJ6000
PJ3260
PJ6001
Touch Pad Cable
Left Speaker Cable (Blue)
Figure 4-24 Removing Display Assembly (2)
4-34 Satellite A50/TECRA A2 Maintenance Manual (960-478)