User Guide

4.11 Display Assembly 4 Replacement Procedures
4.11 Display Assembly
Removing the Display assembly
The following describes the procedure for removing the display assembly (See Figure 4-23 to
4-25).
1. Close the display and turn the computer face down.
2. Remove the following screws from the bottom of the computer.
• M2.5x6B THIN BIND screw x9 (“6” in the figure)
• M2.5x14B THIN BIND screw x5 (“14” in the figure)
• M2.5x18B THIN BIND screw x1 (“18” in the figure)
14
6
6
14
6
14
6
14
18 6
6
6
6
14
6
Figure 4-23 Removing Display Assembly (1)
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-33