User Guide

4.9 Switch Board 4 Replacement Procedures
4.9 Switch Board
Removing the Switch board
The following describes the procedure for removing the switch board (See Figure 4-20).
1. Open the display and unlock the connector. Disconnect the switch board cable from
the connector on the system board.
2. Remove the following screw securing the switch board.
• M2.5x2.8B THIN BIND screw x1
3. Slide the switch board to the left and remove it.
M2.5x2.8B THIN BIND
Switch Board
PJ3280
Switch Board Cable
PJ3200
Figure 4-20 Removing Switch Board
4. Unlock the connector and disconnect the switch board cable from the switch board.
Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-29