User Guide

3.29 SETUP 3 Test and Diagnostics
6. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
LED+AnalogRGB Selects both the internal LCD and the external CRT for
simultaneous display.
NOTE: You cannot select TV display in HW Setup. To display on a TV screen,
use Fn+F5.
When an external CRT display which does not support SVGA mode is connected
and "LED+AnalogRGB" is selected, the external display is not displayed.
(b) TV Type
This option allows you to select the type of TV.
NTSC (Japan) TV in Japanese system
NTSC (US) TV in the U.S. system
PAL TV in Europe system
3-77 Satellite A50/TECRA A2 Maintenance Manual (960-478)