User Guide

3.20 Wireless LAN Test (Calexico) 3 chTests and Diagnostics
3.20 Wireless LAN Test (Calexico)
This section describes how to perform the wireless LAN transmitting-receiving test with
the test program. To execute the LAN Test, use the Diagnostics disk for wireless LAN
test. Finish the tests of the main Diagnostics disk by selecting 99 - EXIT TO
DIAGNOSTICS MENU in the DIAGNOSTIC TEST MENU. Then in the
DIAGNOSTICS MENU, select 9 - EXIT TO MS-DOS.
Insert the Diagnostics disk for wireless LAN test into the Floppy Disk Drive. Turn on the
power while pressing U.
The following menu appears in the display.
******Intel Calexico2 11b/g Card Maintenance test Menu********
* *
* 1 : SKU check of Module *
* *
* 2 : MAC Address Check *
* *
* 3 : Antenna Check & communication test of 11b mode *
* *
* 4 : communication test of 11g mode *
* *
* 5 : All the tests of Calexico 11g Card *
* (SKU & MAC Check, 11b/g communication test) *
* *
**************************************************************
SELECT TEST No, (1-5) :
To execute the subtest, input the subtest number and press Enter.
Subtest 01 SKU check of module
This subtest displays SKU information.
Confirm if there is no difference between the SKU information appeared
on the display and the information of the label on the back of the wireless
LAN Card.
Press any key and return to the test menu.
Satellite A50/TECRA A2 Maintenance Manual (960-478) 3-47