User Guide

4.5 HDD 4 Replacement Procedures
Satellite A40 Maintenance Manual (960-458) 4-17
3. Remove the following screws and pull the tab of the HDD pack to remove it. Be careful
not to damage the connector.
• M2.5×4B FLAT HEAD screw ×1
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
4. Remove the following screws.
• M3×4S FLAT HEAD screw ×4
5. Detach the HDD from the HDD bracket.
CAUTION: Do not apply pressure to the top and bottom of the HDD.
HDD
HDD bracket
M3
×
4
S
FLAT
HEAD
M3
×
4S FLAT HEAD
Figure 4-5 Detaching the HDD bracket and HDD