User Guide

3 Tests and Diagnostics 3.2 Executing the Diagnostic Test
3-4 Satellite A40 Maintenance Manual (960-458)
When “1.Repair Main (T&D)” is selected and Enter key is pressed, the following menu
will appear.
Refer to sections 3.18 through 3.23 for detailed descriptions of item 4 through 8 and 0 (Service
programs).
NOTE: To exit the DIAGNOSTIC TEST MENU, press the Esc key. If a test program is
in progress, press Ctrl + Break to exit the test program, or press Ctrl + C to
stop the test program.